Glass level bubble
Cylindrical glass level bubble
The cylinder has a standard bubble at one end, high definition transparency, and the size and accuracy can be customized according to the user. High-precision glass long blisters, highly transparent, with a shelf life of five years, can rotate around the 0,0² axis to maintain accuracy, angle values from 60/2mm-2³ /2mm products are widely used in theodolites, spirits, compasses, electronics Weighing, total station and other photoelectric instruments.
Universal glass level bubble
Material: Boron.
Liquid color: green, red, transparent.
urved glass level bubble
PTFE Graphite Packing
The packing is woven of graphite PTFE yarn twisted through a mixture of PTFE dispersion resins and fine graphite powder plus moderate amount of heat-resistant lubricant.
PTFE Graphite Packing with oil
Packing: Packing made of 100% g PTFE yarns, and re-impregnated with a silicone lubricant with density about 1.6g/cm3.
Applications
For use in pumps, valves, reciprocating and rotating shafts, mixers and agitators.
Especially designed for services involving surface speeds and temperature higher than those normally specified for pure PTFE packings.
Can be safely used in all chemical pump applications with the exception of molten alkali metals, fluoride, fuming nitric acid and other strong oxidizing agents.
It is also against water, steam, petroleum derivatives, vegetable oil and solvents.
Reflex Sight Glass
Reflex level gauge glass is made from High Borosilicate,
They are used in level gauge in boiler for water position. Reflex type one side facing the medium chamber is provided with molded grooves set at 90 degree angles.
The molding process increases the resistance of the glass grooves to wear; the skin which the glass attains during molding gives it maximum smoothness and hardness.
This makes it extremely resistant to the attack of boiler water
Specifications
* Material: borosilicate glass, aluminosilicate glass.
* Max pressure: 4Mpa.
* Max temperature: 430 �°C.
* Grooves: one, two, three or four grooves.
* Using life: more than 20 years.
* Standard: The products is strictly according to the standard of DIN7081.
* Accessories: Gaskets and mica sheet can also be provided together.
Transparent Gauge Glass
Transparent type is also manufactured from â??extra-hardâ?? borosilicate glass. The surfaces on both sides are finely smooth and ensure optimal transparency.
A) One is as same with reflex Gauge Glasses,use molds to make the semi-finished products,afterwards,ground and polish the two side to ensure optimal transparency.
By this manufacturing technique,the definition isnâ??t good.
B)The other manufacturing technique is made of High Borosilicate sheet of 17mm thickness, cut the glass sheet according the detailed size and polish the side face for the smooth.
This manufacturing technique glass is very clear,but the goods cost is higher.
Specifications
* Material: borosilicate glass, aluminosilicate glass.
* Max pressure: 6Mpa.
* Max temperature: 430 �°C.
* Using life: more than 20 years.
* Standard: The products is strictly according to the standard of DIN7081.
* Accessories: Gaskets and mica sheet can also be provided together.
Reflex Sight Glass
Reflex level gauge glass is made from High Borosilicate,
They are used in level gauge in boiler for water position. Reflex type one side facing the medium chamber is provided with molded grooves set at 90 degree angles.
The molding process increases the resistance of the glass grooves to wear; the skin which the glass attains during molding gives it maximum smoothness and hardness.
This makes it extremely resistant to the attack of boiler water
Specifications
* Material: borosilicate glass, aluminosilicate glass.
* Max pressure: 4Mpa.
* Max temperature: 430 �°C.
* Grooves: one, two, three or four grooves.
* Using life: more than 20 years.
* Standard: The products is strictly according to the standard of DIN7081.
* Accessories: Gaskets and mica sheet can also be provided together.
Round Glass
The borosilicate round glass is produced according to the international standard DIN7080.
Operating temperature is 280 degrees Celsius.
In a toughened form, temperatures up to 315 degrees Celsius are possible whilst annealed glass may be used up 400 degrees Celsius continuously with a short term maximum of 500 degrees Celsius.
In addition to the standard DIN size, other sizes can be customized.
Round Glass
The borosilicate round glass is produced according to the international standard DIN7080.
Operating temperature is 280 degrees Celsius.
In a toughened form, temperatures up to 315 degrees Celsius are possible whilst annealed glass may be used up 400 degrees Celsius continuously with a short term maximum of 500 degrees Celsius.
In addition to the standard DIN size, other sizes can be customized.
Spirit Level Bubble Vial
Our company specialized in the research and manufacturing and sale of level vial with advanced facilities and rich experience.
There are three hundred kinds of products in our company including:
1) glass spirit level vial
2) metal body level component
3) metal circular level
4) electronic vial
5) plastic spirit level vial
6) High precision glass vials
7) curved glass spirit level vial
8) sensor level
9) special spirit level
The sensitivity is from 60²/2mm to 2" /2mm. Our products have been used widely in optical and electronic instrument such as theodolite, level, compass level, electronic scale, total station and etc .
Application:
For use in pumps, valves, reciprocating and rotating shafts, mixers and agitators.
Especially designed for services involving surface speeds and temperature higher than those normally specified for pure PTFE packings.
Can be safely used in all chemical pump applications with the exception of molten alkali metals, fluoride, fuming nitric acid and other strong oxidizing agents.
It is also against water, steam, petroleum derivatives, vegetable oil and solvents.
Round Glass
The borosilicate round glass is produced according to the international standard DIN7080.
Operating temperature is 280 degrees Celsius.
In a toughened form, temperatures up to 315 degrees Celsius are possible whilst annealed glass may be used up 400 degrees Celsius continuously with a short term maximum of 500 degrees Celsius.
In addition to the standard DIN size, other sizes can be customized.
Machine Tool Guide is a nano-polymer composites based on PTFE material,applying in all types of predision machine tools requiring high accuracy,CNC equipments and high-end guide bands products of processing centers. The guide bands contain rich solid lubricant particles,which enables the bands have a excellent friction and wearing properties. By force of nano super fine recipe,uniform and dense material and strong wearing resistance,the soft bands are widely used in all types of common machine tools,textiles,printing,paper-manufacturing,food,chemical engineering,woodworker or manufacture and maintenance of other mechanical sliding guide.,especially precision machine tools etc.
