SG130 Series Standard CNC metal wire mesh weaving machine is a kind of general use machine. The high performance servo drive, weft insertion mechanism, various shedding devices (electric rotation dobby, cam opening or external jacquard,etc.), coordinating with high steel rigidity beating-up mechanism, large touch screen make it easy and flexible to operate and has characteristics such as wide weaving range, high-precision, low noise, diverse patterns and easy to maintenance.
It can weave different metal wires such as: stainless steel, iron, copper, brass, phosphor copper, aluminum, platinum, and other non-metal wires such as polyester, plastic, etc.
Weaving width: 1000mm, 1300mm, 1600mm, 2000mm,2500mm
Wire diameter range: 0.06-0.45mmmm
Weaving density: plain weave square hole 20-260 mesh / inch, twill weave 400 mesh / inch
Speed: 120 turns/minute, frequency stepless speed regulation, the actual speed depends on the weaving width and detailed specifications.
Heald frame and form: three type available -Tappet arch heald, rotating electronic dobby and servo dobby . And 2-20 pieces of aluminum alloy heald frame (optional).
Basic tension: 20000 N/m.
SG130 Series Standard CNC metal wire mesh weaving machine is a kind of general use machine. The high performance servo drive, weft insertion mechanism, various shedding devices (electric rotation dobby, cam opening or external jacquard,etc.), coordinating with high steel rigidity beating-up mechanism, large touch screen make it easy and flexible to operate and has characteristics such as wide weaving range, high-precision, low noise, diverse patterns and easy to maintenance.
It can weave different metal wires such as: stainless steel, iron, copper, brass, phosphor copper, aluminum, platinum, and other non-metal wires such as polyester, plastic, etc.
Weaving width: 1000mm, 1300mm, 1600mm, 2000mm,2500mm
Wire diameter range: 0.06-0.45mmmm
Weaving density: plain weave square hole 20-260 mesh / inch, twill weave 400 mesh / inch
Speed: 120 turns/minute, frequency stepless speed regulation, the actual speed depends on the weaving width and detailed specifications.
Heald frame and form: three type available -Tappet arch heald, rotating electronic dobby and servo dobby . And 2-20 pieces of aluminum alloy heald frame (optional).
Basic tension: 20000 N/m.
SG160 series of heavy duty CNC metal wire mesh weaving machine is developed by our own company. It is suitable for weaving heavier metal mesh fabric. It adopts flexible rapier linear weft insertion with the characters of small opening and flat mesh surface. There are two kinds of beating up forms :single beat /pick and double beat/pick and many kinds of shedding opening structures which can be selected, like tappet hanging/harness heald, arch heald and servo dobby, etc .And it is with numerical control mesh winding, numerical control let -off and automatic adjustment of mesh tension. It can weave stainless steel, iron, copper, brass, phosphor copper, aluminum, platinum, FeCrAL, polyester, plastic and all other materials of wire mesh.
Weaving width: 1000mm, 1300mm, 1600mm, 2000mm,2500mm,3000mm
Wire diameter range: 0.1-0.7mm
Weaving density: plain weave square hole 10-100 mesh / inch, twill weave 350 mesh / inch
Speed: 50-70 turns/minute, RPM stepless speed regulation,the actual speed depends on the weaving width and detailed specifications.
Heald frame and form: three kinds of structures are optional -Tappet hanging/harness heald, arch heald, servo dobby and 2-8 pieces of aluminum alloy heald frame or steel heald frame (optional)
Basic tension: 40000 N/m
SG180 series of large CNC metal wire mesh weaving machine is suitable for weaving heavier metal mesh fabric. It adopts flexible rapier linear weft insertion .There are two kinds of beating up forms :single beat /pick and double beat/pick and two kinds of shedding opening structures which can be selected: tappet hanging/harness heald and servo dobby. It is with the character: Mesh winding and let -off automatic numerical control and automatic adjust mesh tension. It can weave metal wire mesh ,like stainless steel, iron, copper, aluminum,alloy, polyester and other non metal wire mesh .
Weaving width: 1300mm,1600mm, 2000mm, 2500mm, 3000mm, 3500mm, 4000mm
Wire diameter range: 0.2-1.0mm or 1.0-2.1mm (optional)
Weaving density: plain weave square hole 6-60 or 2-40 mesh / inch, twill weave 260 mesh / inch.
Speed: 35-50 turns/minute, frequency stepless speed regulation, the actual speed depends on the weaving width and detailed specifications.
Heald frame and form: two kinds of structures are optional -Tappet hanging/harness heald and servo dobby and 2-8 pieces of aluminum alloy heald frame or steel heald frame (optional)
Basic tension: 60000 N/m.
SG100 series of light-Duty CNC wire mesh weaving machine is suitable for weaving high quality fine mesh.
It has many kind of characters like high precision, fast rotation speed and low noise , wide weaving range and various mesh weaving patterns.
It can weave different kind of wire mesh in different material , like stainless steel, iron, copper, brass, phosphor copper, aluminum, silver, platinum and so on.
Weaving width: 1000mm, 1300mm, 1600mm, 2000mm.
Wire diameter range: 0.03-0.3mm
Weaving density: plain weave square hole 40-400 mesh / inch, twill weave 600 mesh / inch, dutch weave 3600 mesh / inch (weft direction).
Speed: 100 (120 optional) RPM stepless speed regulation, the actual speed depends on the weaving width and detailed specifications.
Shedding form: Tappet arch heald, rotating electronic dobby, servo dobby or equipped with jacquard machine.
Heald frame and form: optional 2-20 pieces of aluminum alloy heald frame.
Basic tension: 15000 N/m
Main technical parameters:
Standard width: 1300 mm
Wire diameter range: 0.05-0.45mm
Weaving density: plain weave square hole15-260 mesh; twill weave up to 400mesh
Speed: 120 (140 optional) RPM
(the actual speed depends on the weaving width and detailed specifications), Step-less speed regulation of frequency converter
Heald frame and form: Tappet arch heald(three type available -Tappet arch heald, rotating electronic dobby and servo dobby). And 2-20 pieces of aluminum alloy heald frame (optional).
CNC: Precise and fast one way linear weft leading is controlled by high performance servo motor under PLC control. Adopt Numerical control let -off (feeding warp wire ) by AC servo motor, real time display tensions data also automatic adjustment. AC servo motor CNC coiling
Basic tension 20000N/M
Weight 45000kg
Outline size 2750mmX3300mmX1500mm
