fire test range of products
1. BS 6853 - Table 1: Interior horizontal supine surfaces
2. BS 6853 - Table 2: Interior vertical surfaces
3. BS 6853 - Table 3: Interior horizontal prone surfaces
4. BS 6853 - Table 4: Exterior horizontal supine surfaces
5. BS 6853 - Table 5: Exterior vertical surfaces
6. BS 6853 - Table 6: Exterior horizontal prone surfaces
7. BS 6853 - Table 7: Interior minor use materials of mass 100g to 500g
8. BS 6853 - Table 8: Exterior minor use materials of mass 400g to 2000g
9. BS 6853 - Table 9: Seat trim
10. BS 6853 - Table 10: Seat shell (back and base)
11. BS 6853 - Table 11: Textiles (free standing and lying)
12. BS 6853 - Table 12: Mattresses
13. BS 6853 - Table 13: Interior cable
14. BS 6853 - Table 14: Exterior cables
We also can provide the following service of fire test to Railway
EN45545-2 Fire protection of railway vehicles: Requirement for fire behaviors of materials EN45545-3 Fire resistance requirements for fire barriers
NFPA 130 Standard for fixed guideway transit and passenger rail systems
DIN5510-2 Fire behaviour of materials and parts, classification, requirement and test methods
BS6853 Code of practice for fire precautions in the design and construction of passenger carrying trains
NF F16-101 Railway Rolling Stock Fire Behavior Choice of Material
CASfire Technical Co.,Ltd
8F Building 4, Chinese Academy of Science,
No.255 South Duiying Road,Jimei, Xiamen 361021, China
Non-flooring material:
DIN54837 and ISO 5659-2 FED Toxicity for S2-S5,SR1/SR2,ST1/ST2
Flooring covering: ISO9239-1 for SF1-SF3 and ISO 5659-2 FED toxicity
Small Parts: DIN53438-2 / DIN53438-3 for K1-K3 or F1-F3
Seats: DIN 54341 EN1021 ISO9705
Cable and Wire: EN 60332-1-2 EN50266-2-4/5 EN 6103 EN 50305
Small Electrical parts: EN 60695-11-10 ISO4589-2
- Test method
> DIN 54837: Small Parts combustion test
> EN ISO 9239-1: extension of the flame test - Floor
> DIN 53438-2: Flammable Material Testing
> DIN EN 60332-1-2: single cable Vertical Burning Test
> DIN EN 61034-1: Wire & Cable Smoke Density Test
> DIN EN 50266-2-4: Vertical Burning Test for punch cable
> DIN EN 1021-1: Seat Burning Test
> DIN EN ISO 5659-2: Smoke Toxicity Test
We also can provide the following service of fire test to Railway
EN45545-2 Fire protection of railway vehicles: Requirement for fire behaviors of materials EN45545-3 Fire resistance requirements for fire barriers
NFPA 130 Standard for fixed guideway transit and passenger rail systems
DIN5510-2 Fire behavior of materials and parts, classification, requirement and test methods
BS6853 Code of practice for fire precautions in the design and construction of passenger carrying trains
NF F16-101 Railway Rolling Stock Fire Behavior Choice of Material
Standard
TB/T 3237 Flame retardant technical specification of decorating materials for multiple unit train
Scope
This Standard is applicable to the flame retardant decorating materials for the multiple unit train with an operation speed larger than or equal to 200km/h.
This Standard specifies the flame retardant property requirements and test methods for the decorating materials for multiple unit train.
Test Method
GB 2406 Oxygen index test
UIC 564 Combustion test
GB 8323 Smoke density test
TB 3237 Part 4.4 Smoke toxicity test
Reference Standard
GB/T 2406.2 Plastics - Determination of Burning Behavior by Oxygen Index
GB/T 10707 Rubber - Determination of the Burning
GB/T 8323.2 Determination of Optical Density by a Single-chamber Test
UIC 564-2 Regulations relating to fire protection
We also can provide the following service of fire test to Railway
EN45545-2 Fire protection of railway vehicles: Requirement for fire behaviors of materials EN45545-3 Fire resistance requirements for fire barriers
NFPA 130 Standard for fixed guideway transit and passenger rail systems
DIN5510-2 Fire behaviour of materials and parts, classification, requirement and test methods
BS6853 Code of practice for fire precautions in the design and construction of passenger carrying trains
NF F16-101 Railway Rolling Stock Fire Behavior Choice of Material
EN 45545-2 New Fire test to railway vehicles
EN 45545-2 New Fire test to railway vehicles -Standard Brief
EN45545 This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2013, and conflicting national standards shall be withdrawn at the latest by March 2016.
EN 45545 supersedes BS 6853, DIN5510-2,NFF16-101 national standards.
This European Standard exists in three official versions (English, French, German).
EN 45545-2 New Fire test to railway vehicles - European Standard
EN 45545-2:2013+A1:2015: Fire protection of railway vehicles - Part 2: Requirement for fire behaviors of materials and components
EN 45545-2 New Fire test to railway vehicles-Scope
This part of EN 45545 specifies the reaction to fire performance requirements for materials and products used on railway vehicles as defined in EN 45545-1.
For each hazard level, this part specifies the test methods, test conditions and reaction to fire performance requirements.It is not within the scope of this European Standard to describe measures that ensure the preservation of the vehicles in the event of o fire.
EN 45545-2:2013+A1:2015 Fire Test to railway components -Hazard levels
HL1, HL2, HL3
EN 45545-2 New Fire test to railway vehicles -Test Method
EN 45545-2 R1: Surface Products
EN 45545-2 R10: Flooring Covering
EN 45545-2 R15, R16: Wire & Cable
EN 45545-2 R22/ R23: Interior seals, Electrical Equipment
EN 45545-2 R24 : Electrotechnical products
EN 45545-2 R24/R25 : PCB Printed circuit boards
EN 45545-2 R26 : Small electrotechnical products
EN 45545-2 New Fire test to railway vehicles -Reference Standard
EN 45545-1: Fire Protection of railway Vehicles â?? Part 1: General
EN 45545-2: Requirement for fire behaviour of materials and components
EN 45545-3: Fire resistance requirements for fire barriers and partitions
EN 45545-4: Fire safety requirements for railway rolling stock design
EN 45545-5: Fire safety requirements for electrical equipment
EN 45545-6: Fire control and management system
EN 45545-7: Flammable liquid and flammable gas installations
We also can provide the following service of fire test to Railway
EN45545-2 Fire protection of railway vehicles: Requirement for fire behaviors of materials EN45545-3 Fire resistance requirements for fire barriers
NFPA 130 Standard for fixed guideway transit and passenger rail systems
DIN5510-2 Fire behaviour of materials and parts, classification, requirement
BS6853 Code of practice for fire precautions in the design and construction
NF F16-101 Railway Rolling Stock Fire Behavior Choice of Material
CASfire Technical Co.,Ltd
8F Building 4, Chinese Academy of Science,
No.255 South Duiying Road,Jimei, Xiamen 361021, China
Tel: (+86) 0592-3500085
MP: (+86) 18906059211
Email: info@casfire.cn
Website: http://www.casfire.cn
Rail transit is one of the main means of transportation. Because of its limited space, it is difficult to escape. The fire performance of materials of railway vehicle has attracted more and more attention around the world.
There are two main standards of fire protection for railway vehicle, EU standard EN45545 and NFPA130.
EN 45545 European Standards
EN 45545-2 Requirement for fire behaviors of materials and components
Fire Hazard Levelï¼?HL1ï¼?HL2ï¼?HL3
Product Categoryï¼?R1 â?? R26
Test Methodï¼?ISO5658-2ï¼?ISO5660-1ï¼?ISO9239-2ï¼?ISO4589-2ï¼?ISO5659-2ï¼?NFX70-100
EN 45545-3 Fire resistance requirements for fire barriers
Test Itemsï¼?Integrate Eï¼?Insulation I
NFPA 130 American Standard
NFPA 130 Standard for fixed guideway transit and passenger rail systems
Test Itemsï¼?Surface Flammability, Smoke Density, Heat Release
Test methodsï¼?ASTM E162ï¼?ASTM E662ï¼?ASTM E1354ï¼?ASTM C1166ï¼?ASTM E119
TB/T 3237 Chinese Standard
TB/T3237 Flame retardant technical specification of decorating materials for multiple unit train
Test Item: Oxygen Index, Flammability, Smoke Density, Smoke Toxicity
Test Methodsï¼?GB/T2406.2 ,UIC564-2, GB/T8323
DIN 5510-2 Germany Standards
DIN5510-2 Preventive fire protection in railway vehicles; Part 2: Fire behaviour and fire side effects of materials and parts, classification, requirement and test methods
BS 6853 British Standards
BS6853 Code of practice for fire precautions in the design and construction of passenger carrying trains
Fire Classification: Category Ia , Ib, II
NF F16-101 French Standards
NF F16-101/102 Railway Rolling Stock Fire Behavior Choice of Material
CASfire Technical Co.,Ltd
8F Building 4, Chinese Academy of Science,
No.255 South Duiying Road,Jimei, Xiamen 361021, China
Tel: (+86) 0592-3500085
MP: (+86) 18906059211
Email: info@casfire.cn
Website: http://www.casfire.cn
From JJ2021
TB/T 3237 Chinese Fire test standard for railway vehicles
TB/T 3237 Chinese Fire test standard for railway vehicles - Standard
TB/T 3237 Flame retardant technical specification of decorating materials for multiple unit train
TB/T 3237 Chinese Fire test standard for railway vehicles â?? Test Method
GB 2406 Oxygen index test
UIC 564 Combustion test
GB 8323 Smoke density test
TB 3237 Part 4.4 Smoke toxicity test
TB/T 3237 Chinese Fire test standard for railway vehicles â?? Scope
This Standard is applicable to the flame retardant decorating materials for the multiple unit train with an operation speed larger than or equal to 200km/h.
This Standard specifies the flame retardant property requirements and test methods for the decorating materials for multiple unit train.
TB/T 3237 Chinese Fire test standard for railway vehicles â?? Reference Standard
GB/T 2406.2 Plastics - Determination of Burning Behavior by Oxygen Index
GB/T 10707 Rubber - Determination of the Burning
GB/T 8323.2 Determination of Optical Density by a Single-chamber Test
UIC 564-2 Regulations relating to fire protection
We also can provide the following service of fire test to Railway
EN45545-2 Fire protection of railway vehicles: Requirement for fire behaviors of materials EN45545-3 Fire resistance requirements for fire barriers
NFPA 130 Standard for fixed guideway transit and passenger rail systems
DIN5510-2 Fire behaviour of materials and parts, classification, requirement and test methods
BS6853 Code of practice for fire precautions in the design and construction of passenger carrying trains
NF F16-101 Railway Rolling Stock Fire Behavior Choice of Material
CASfire Technical Co.,Ltd
8F Building 4, Chinese Academy of Science,
No.255 South Duiying Road,Jimei, Xiamen 361021, China
Tel: (+86) 0592-3500085
MP: (+86) 18906059211
Email: info@casfire.cn
Website: http://www.casfire.cn
Standard Brief
EN45545 This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2013, and conflicting national standards shall be withdrawn at the latest by March 2016.
EN 45545 supersedes BS 6853, DIN5510-2,NFF16-101 national standards.
This European Standard exists in three official versions (English, French, German)
Scope
This part of EN 45545 specifies the reaction to fire performance requirements for materials and products used on railway vehicles as defined in EN 45545-1.
For each hazard level, this part specifies the test methods, test conditions and reaction to fire performance requirements.It is not within the scope of this European Standard to describe measures that ensure the preservation of the vehicles in the event of o fire.
Hazard levels
HL1, HL2, HL3
Test Method
EN 45545-2 R1: Surface Products
EN 45545-2 R10: Flooring Covering
EN 45545-2 R15, R16: Wire & Cable
EN 45545-2 R22/ R23: Interior seals, Electrical Equipment
EN 45545-2 R24 : Electrotechnical products
EN 45545-2 R24/R25 : PCB Printed circuit boards
EN 45545-2 R26 : Small electrotechnical products
Reference Standard
EN 45545-1: Fire Protection of railway Vehicles â?? Part 1: General
EN 45545-2: Requirement for fire behaviour of materials and components
EN 45545-3: Fire resistance requirements for fire barriers and partitions
EN 45545-4: Fire safety requirements for railway rolling stock design
EN 45545-5: Fire safety requirements for electrical equipment
EN 45545-6: Fire control and management system
EN 45545-7: Flammable liquid and flammable gas installations
We also can provide the following service of fire test to Railway
EN45545-2 Fire protection of railway vehicles: Requirement for fire behaviors of materials EN45545-3 Fire resistance requirements for fire barriers
NFPA 130 Standard for fixed guideway transit and passenger rail systems
DIN5510-2 Fire behaviour of materials and parts, classification, requirement
BS6853 Code of practice for fire precautions in the design and construction
NF F16-101 Railway Rolling Stock Fire Behavior Choice of Material
EN 45545-2 New Fire test to railway vehicles - European Standard
EN 45545-2:2013+A1:2015: Fire protection of railway vehicles - Part 2: Requirement for fire behaviors of materials and components
Scope
This part of EN 45545 specifies the reaction to fire performance requirements for materials and products used on railway vehicles as defined in EN 45545-1.
For each hazard level, this part specifies the test methods, test conditions and reaction to fire performance requirements.It is not within the scope of this European Standard to describe measures that ensure the preservation of the vehicles in the event of o fire.
Hazard levels
HL1, HL2, HL3
Test Method
EN 45545-2 R1: Surface Products
EN 45545-2 R10: Flooring Covering
EN 45545-2 R15, R16: Wire & Cable
EN 45545-2 R22/ R23: Interior seals, Electrical Equipment
EN 45545-2 R24 : Electrotechnical products
EN 45545-2 R24/R25 : PCB Printed circuit boards
EN 45545-2 R26 : Small electrotechnical products
Reference Standard
EN 45545-1: Fire Protection of railway Vehicles â?? Part 1: General
EN 45545-2: Requirement for fire behaviour of materials and components
EN 45545-3: Fire resistance requirements for fire barriers and partitions
EN 45545-4: Fire safety requirements for railway rolling stock design
EN 45545-5: Fire safety requirements for electrical equipment
EN 45545-6: Fire control and management system
EN 45545-7: Flammable liquid and flammable gas installations
We also can provide the following service of fire test to Railway
EN45545-2 Fire protection of railway vehicles: Requirement for fire behaviors of materials EN45545-3 Fire resistance requirements for fire barriers
NFPA 130 Standard for fixed guideway transit and passenger rail systems
DIN5510-2 Fire behaviour of materials and parts, classification, requirement
BS6853 Code of practice for fire precautions in the design and construction
NF F16-101 Railway Rolling Stock Fire Behavior Choice of Material
CASfire Technical Co.,Ltd
8F Building 4, Chinese Academy of Science,
No.255 South Duiying Road,Jimei, Xiamen 361021, China
Tel: (+86) 0592-3500085
MP: (+86) 18906059211
Email: info@casfire.cn
Website: http://www.casfire.cn
- Standard
TB/T 3237 Flame retardant technical specification of decorating materials for multiple unit train
Test Method
GB 2406 Oxygen index test
UIC 564 Combustion test
GB 8323 Smoke density test
TB 3237 Part 4.4 Smoke toxicity test
Reference Standard
GB/T 2406.2 Plastics - Determination of Burning Behavior by Oxygen Index
GB/T 10707 Rubber - Determination of the Burning
GB/T 8323.2 Determination of Optical Density by a Single-chamber Test
UIC 564-2 Regulations relating to fire protection
GB 8410(Chinese Standard) Flammability Test to Motor Vehicle
CASfire Technical Co.,Ltd have rich experience to provide GB8 410 Flammability of automotive interior materials.
GB8410 Scope
This Standard specifies the technical requirements and test methods for the horizontal flammability of automotive interior materials.
This Standard applies to the assessment of automotive interior materials.
As automotive interior parts (positions, layout and application conditions of the parts, ignition sources, etc.) differ considerably from the test conditions specified in this Standard, this Standard does not apply to the assessment of all the actual flammability of automotive interior materials.
GB8410 Technical requirementsï¼?
The flammability of interior materials must meet the following technical requirement:
The burning rate is not greater than 100 mm/min.
GB 8410 Test methodï¼?
Fit the sample horizontally on a U-shaped support then ignite the free end of the sample on a flame of the specified height in the combustion box. 15 seconds later, determine whether the flame on the sample goes out or at what time it goes out, the burnt distance of the sample, and the time used in burning this distance.
GB 8410 - Relative Standard
FMVSS 302 Flammability of Interior materials
SAE J369: Flammability of Polymeric Interior Materials Horizontal Test Method
TL1010: Flammability
ISO 3795:Road vehicles, and tractors and machinery for agriculture and forestry -- Determination of burning behaviour of interior materials
DIN 75200:Determination of burning behaviour of interior materials in motor vehicles
95/28/EC: The burning behaviour of materials used in the interior construction of certain categories of motor vehiclesâ??, and is intended to ensure that they meet fire safety standards
NF P 92-505: Safety against fire - Building materials - Reaction to fire tests - Test used for thermal melting materials - Dripping test.
U.T.A.C 18-502 T1: burning behaviour of materials used in the interior construction of certain categories of motor vehicles
BMW N 60121.0: BMW standard
DBL 5307: Benz Standard
GM L-T06-302G-79: GE Standard
Mitsubishi ES-X60410: Oxygen Index
VW TL 1010: burning behaviour
Volvo STD 5031: burning behaviour
Web:http://www.casfire.cn
E-mail:info@casfire.cn
ASTM E595-15 Outgassing test - Test Standard
ASTM E595 Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment
ASTM E595-15 Outgassing test - Test Requirement
CVCM collected volatile condensable materials 0.1%
TML total mass loss 1%
WVR the amount of water vapor regained
Outgassing test ASTM E595 - Test Conditions
Pre Condition: 73 F/ 50% RH (24Hours) ; Post Condition: 73 F/ 50% RH (24Hours)
This test method describes the test apparatus and related operating procedures for evaluating the mass loss of materials being subjected to 125 C at less than 7*103 Pa for 24 h. The overall mass loss can be classified into noncondensables and condensables. The latter are characterized herein as being capable of condensing on a collector at a temperature of 25 C.
ASTM E595-15 Outgassing test Brief
Many types of organic, polymeric, and inorganic materials can be tested. These include polymer potting compounds,foams, elastomers, films, tapes, insulations, shrink tubings,
adhesives, coatings, fabrics, tie cords, and lubricants. The materials may be tested in the as-received condition or prepared for test by various curing specifications.
More about Outgassing test ASTM E595,please contact us :
BS 6853Code of practice for fire precautions in the design and construction of passenger carrying trains-passenger train
Fire Classification: Category Ia , Ib, II
Test Category: Table1 â?? Table14
Test Items: Flame Spread, Surface Flammability, Smoke Density, and Smoke Toxicity
Test Standards: BS 476-6ï¼?BS 476-7ï¼?BS 6853 Annex D, BS 6853 Annex B
fire test range of products
1. BS 6853 - Table 1: Interior horizontal supine surfaces
2. BS 6853 - Table 2: Interior vertical surfaces
3. BS 6853 - Table 3: Interior horizontal prone surfaces
4. BS 6853 - Table 4: Exterior horizontal supine surfaces
5. BS 6853 - Table 5: Exterior vertical surfaces
6. BS 6853 - Table 6: Exterior horizontal prone surfaces
7. BS 6853 - Table 7: Interior minor use materials of mass 100g to 500g
8. BS 6853 - Table 8: Exterior minor use materials of mass 400g to 2000g
9. BS 6853 - Table 9: Seat trim
10. BS 6853 - Table 10: Seat shell (back and base)
11. BS 6853 - Table 11: Textiles (free standing and lying)
12. BS 6853 - Table 12: Mattresses
13. BS 6853 - Table 13: Interior cable
14. BS 6853 - Table 14: Exterior cables
We also can provide the following service of fire test to Railway
EN45545-2 Fire protection of railway vehicles: Requirement for fire behaviors of materials EN45545-3 Fire resistance requirements for fire barriers
NFPA 130 Standard for fixed guideway transit and passenger rail systems
DIN5510-2 Fire behaviour of materials and parts, classification, requirement and test methods
BS6853 Code of practice for fire precautions in the design and construction of passenger carrying trains
NF F16-101 Railway Rolling Stock Fire Behavior Choice of Material
EN 45545-2 New Fire test to railway vehicles -Standard Brief
EN45545 This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2013, and conflicting national standards shall be withdrawn at the latest by March 2016.
EN 45545 supersedes BS 6853, DIN5510-2,NFF16-101 national standards.
This European Standard exists in three official versions (English, French, German).
EN 45545-2 New Fire test to railway vehicles - European Standard
EN 45545-2:2013+A1:2015: Fire protection of railway vehicles - Part 2: Requirement for fire behaviors of materials and components
EN 45545-2 New Fire test to railway vehicles-Scope
This part of EN 45545 specifies the reaction to fire performance requirements for materials and products used on railway vehicles as defined in EN 45545-1.
For each hazard level, this part specifies the test methods, test conditions and reaction to fire performance requirements.It is not within the scope of this European Standard to describe measures that ensure the preservation of the vehicles in the event of o fire.
EN 45545-2:2013+A1:2015 Fire Test to railway components -Hazard levels
HL1, HL2, HL3
EN 45545-2 New Fire test to railway vehicles -Test Method
EN 45545-2 R1: Surface Products
EN 45545-2 R10: Flooring Covering
EN 45545-2 R15, R16: Wire & Cable
EN 45545-2 R22/ R23: Interior seals, Electrical Equipment
EN 45545-2 R24 : Electrotechnical products
EN 45545-2 R24/R25 : PCB Printed circuit boards
EN 45545-2 R26 : Small electrotechnical products
EN 45545-2 New Fire test to railway vehicles -Reference Standard
EN 45545-1: Fire Protection of railway Vehicles â?? Part 1: General
EN 45545-2: Requirement for fire behaviour of materials and components
EN 45545-3: Fire resistance requirements for fire barriers and partitions
EN 45545-4: Fire safety requirements for railway rolling stock design
EN 45545-5: Fire safety requirements for electrical equipment
EN 45545-6: Fire control and management system
EN 45545-7: Flammable liquid and flammable gas installations
We also can provide the following service of fire test to Railway
EN45545-2 Fire protection of railway vehicles: Requirement for fire behaviors of materials EN45545-3 Fire resistance requirements for fire barriers
NFPA 130 Standard for fixed guideway transit and passenger rail systems
DIN5510-2 Fire behaviour of materials and parts, classification, requirement
BS6853 Code of practice for fire precautions in the design and construction
NF F16-101 Railway Rolling Stock Fire Behavior Choice of Material
CASfire Technical Co.,Ltd have rich experience to provide BSS 7238 Smoke Density test to Aircraft Material.
BSS 7238 Smoke Density to Aircraft Material
BSS 7238: Fire Test for Smoke Density
2 BSS 7238 Smoke Density to Aircraft Material
BSS 7238 Fire test to aircraft material â?? Brief
BSS 7238 test the specific optical density of smoke generated by solid materials by NBS chamber.
BSS 7238 Smoke Density to Aircraft Material
The samples will be dried under temperature 60 in 24 hours, and conditioned in temperature 23 and humidity 50
The following result will be mesured
- Ds 1.5 Optical density in 1.5 minute
- Ds 4.0 Optical density in 4 minute
- Dm
3 Fire test to aircraft material - relative standards
CASfire Technical Co.,Ltd have rich experience to provide BSS 7239 Toxicity Test to Aircraft Material
BSS 7239 Toxicity Test to Aircraft material
BSS 7239: Test method for toxic gas generation by materials on combustion
BSS 7239 Toxicity Test to Aircraft material - Brief
Gases produced for analysis are generated in a specified, calibrated smoke chamber during standard rate of smoke generation testing (ASTM E 662), in both flaming combustion and non-flaming pyrolytic decomposition test modes
BSS 7239 Toxicity Test to Aircraft material- Gases measured
The following gases are required to be measured by this test standard
CO Carbon monoxide
HF Hydrogen Fluoride
HCl Hydrogen chloride
NOx Nitrogen oxides (Both NO, nitric oxide, and NO2, Nitrogen dioxide, are detected)
SO2 Sulfur dioxide
HCN Hydrogen cyanide
Fire test to aircraft material relative standards
FAR 25.853 flammability test to aircraft material
Air bus standard ABD 0031 - airbus fire testing â?? flame, smoke and toxicity
Boeing Standard BSS 7238 fire testing to smoke density
Boeing Standard BSS 7239 fire testing to toxicity
ASTM Standard ASTM E 662 fire testing to Smoke Density
ASTM Standard ASTM E 162 Surface Flammability of materials
CASfire Technical Co.,Ltd have rich experience to provide FAR 25.853 Vertical Flammability Test for Aircraft Material
FAR 25.853 Vertical Flammability Test for Aircraft Material- Standard
Far 25.853: Fire Protection for compartment interior
FAR 25.853 fire test to aircraft material - Vertical Test
FAR 25.853 vertical test - Brief
The test apparatus are almost same to UL94V and test the performance of self-extinguish of material under fire condition.
FAR 25.853 vertical test - Test method
The samples is 76mm width and is placed vertically, the ignition resource is same to horizontal test. The burner apply 60s or 12s
The following result will be recorded
- Burning length
- Flame time
- Dropping time
FAR 25.853 Vertical Flammability Test for Aircraft Material- other standards
Airbus standard: ABD 0031- airbus fire testing - flame, smoke and toxicity
Boeing Standard: BSS 7238 fire testing to smoke density
Boeing Standard: BSS 7239 fire testing to toxicity
ASTM Standard: ASTM E 662 fire testing to Smoke Density
FAR 25.853 Fire test to aircraft material - Test method
Vertical flammability test: 14 FAR 25.853 b(4)), (App. F to part 25 part I (a)
Smoke Density Test: 14 FAR 25.853 (d), (App. F to part 25, part V)
Heat Release Test: 14 FAR 25.853 (d), Appendix F, Part IV
Seat Test: 14 FAR 25.853 (c, App.F to part II)
Horizontal Test: 14 FAR 25.853 b(2,3), (App. F to part 25 part I (a),(1)
45 flammability test: 14 FAR 25.853 (b), (App. F to part 25, part I (6))
Test Items Surface Flammability, Smoke Density, Heat Release
Test methods ASTM E162 ASTM E662 ASTM E135 ASTM C116 ASTM E119
Test Method
Surface Material : ASTM E162 Surface Flammability & ASTM E662 Smoke Density
Elastomers : ASTM C 1166 & ASTM E 662
Fabrics : 14 CFR 25 & ASTM E 662
Cushioning : ASTM D 3675 & STM E 662
Small Compoment : ASTM E 1354 Heat Release
Standard Introduction
This standard shall cover fire protection requirements for underground, surface, and elevated fixed guideway transit and passenger rail systems, including trainways, vehicles, and vehicle maintenance and storage areas, and for life safety from fire in fixed guideway transit and passenger rail system stations, trainways, vehicles, and outdoor vehicle maintenance and storage areas.
Reference Standards
ASTM E 162 Surface Flammability of Materials Using a Radiant Heat Energy Source
ASTM E 662 Specific Optical Densityof Smoke Generated by Solid Materials
ASTM C 1166 Flame Propagation of Dense and Cellular Elastometric Gaskets
ASTM D 3675 Surface Flammability of Flexible Cellular Materials
ASTM E 1354 Test Method for Heat and Visible Smoke Release Rates
Bombardier SMP800-C Toxic Gas Generation Test
We also can provide the following service of fire test to Railway
EN45545-2 Fire protection of railway vehicles: Requirement for fire behaviors of materials EN45545-3 Fire resistance requirements for fire barriers
NFPA 130 Standard for fixed guideway transit and passenger rail systems
DIN5510-2 Fire behaviour of materials and parts, classification, requirement and test methods
BS6853 Code of practice for fire precautions in the design and construction of passenger carrying trains
NF F16-101 Railway Rolling Stock Fire Behavior Choice of Material
BS 6853Code of practice for fire precautions in the design and construction of passenger carrying trains-passenger train
Fire Classification: Category Ia , Ib, II
Test Category: Table1 â?? Table14
Test Items: Flame Spread, Surface Flammability, Smoke Density, and Smoke Toxicity
Test Standards: BS 476-6ï¼?BS 476-7ï¼?BS 6853 Annex D, BS 6853 Annex B
fire test range of products
1. BS 6853 - Table 1: Interior horizontal supine surfaces
2. BS 6853 - Table 2: Interior vertical surfaces
3. BS 6853 - Table 3: Interior horizontal prone surfaces
4. BS 6853 - Table 4: Exterior horizontal supine surfaces
5. BS 6853 - Table 5: Exterior vertical surfaces
6. BS 6853 - Table 6: Exterior horizontal prone surfaces
7. BS 6853 - Table 7: Interior minor use materials of mass 100g to 500g
8. BS 6853 - Table 8: Exterior minor use materials of mass 400g to 2000g
9. BS 6853 - Table 9: Seat trim
10. BS 6853 - Table 10: Seat shell (back and base)
11. BS 6853 - Table 11: Textiles (free standing and lying)
12. BS 6853 - Table 12: Mattresses
13. BS 6853 - Table 13: Interior cable
14. BS 6853 - Table 14: Exterior cables
We also can provide the following service of fire test to Railway
EN45545-2 Fire protection of railway vehicles: Requirement for fire behaviors of materials EN45545-3 Fire resistance requirements for fire barriers
NFPA 130 Standard for fixed guideway transit and passenger rail systems
DIN5510-2 Fire behaviour of materials and parts, classification, requirement and test methods
BS6853 Code of practice for fire precautions in the design and construction of passenger carrying trains
NF F16-101 Railway Rolling Stock Fire Behavior Choice of Material
NFPA 130 Standard for fixed guideway transit and passenger rail systems
Standard Introduction
This standard shall cover fire protection requirements for underground, surface, and elevated fixed guideway transit and passenger rail systems, including trainways, vehicles, and vehicle maintenance and storage areas, and for life safety from fire in fixed guideway transit and passenger rail system stations, trainways, vehicles, and outdoor vehicle maintenance and storage areas.
Test Method
Surface Material : ASTM E162 Surface Flammability & ASTM E662 Smoke Density
Elastomers : ASTM C 1166 & ASTM E 662
Fabrics : 14 CFR 25 & ASTM E 662
Cushioning : ASTM D 3675 & STM E 662
Small Compoment : ASTM E 1354 Heat Release
Reference Standards
ASTM E 162 Surface Flammability of Materials Using a Radiant Heat Energy Source
ASTM E 662 Specific Optical Densityof Smoke Generated by Solid Materials
ASTM C 1166 Flame Propagation of Dense and Cellular Elastometric Gaskets
ASTM D 3675 Surface Flammability of Flexible Cellular Materials
ASTM E 1354 Test Method for Heat and Visible Smoke Release Rates
Bombardier SMP800-C Toxic Gas Generation Test
We also can provide the following service of fire test to Railway
EN45545-2 Fire protection of railway vehicles: Requirement for fire behaviors of materials EN45545-3 Fire resistance requirements for fire barriers
NFPA 130 Standard for fixed guideway transit and passenger rail systems
DIN5510-2 Fire behaviour of materials and parts, classification, requirement and test methods
BS6853 Code of practice for fire precautions in the design and construction of passenger carrying trains
NF F16-101 Railway Rolling Stock Fire Behavior Choice of Material
CASfire Technical Co.,Ltd
8F Building 4, Chinese Academy of Science,
No.255 South Duiying Road,Jimei, Xiamen 361021, China
Standard Brief
EN45545 This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2013, and conflicting national standards shall be withdrawn at the latest by March 2016.
Hazard levels
HL1, HL2, HL3
Test Method
EN 45545-2 R1: Surface Products
EN 45545-2 R10: Flooring Covering
EN 45545-2 R15, R16: Wire & Cable
EN 45545-2 R22/ R23: Interior seals, Electrical Equipment
EN 45545-2 R24 : Electrotechnical products
EN 45545-2 R24/R25 : PCB Printed circuit boards
EN 45545-2 R26 : Small electrotechnical products
