Glazed Roof Tile Board Forming Machine
Product Applicationï¼?
This machine can be used to produce Color Steel Roof Tile Board, Corrugated Wall Panel, Metal Sheet Roof Board, Metal Sheet Wall Panel Board, Color Steel Roof Sheet, Glazed Roof Tile Board, Color Steel Wall Panel Board, Color Steel Roof Tile Panel, Metal Ridge Cap, Iron Steel Ridge Sheet Roll, PPGI Corrugated Roof Tile, Color Glazed Steel Roof Tile, Steel Corrugated Roof Tile, Corrugated Color Steel Roof Tile, Wall Panel, Corrugated Wall Panel Board, Corrugated Sheet Panel etc.
Glazed steel tile roll forming machine
Feeding width 1000mm.
Cover width 828mm
Yield stress 235Mpa (33KSI) ~ 345Mpa (50KSI).
Roll forming Speed 15-18 m/min
Cutting Tolerance +/-2.5mm(lengthâ?¤5000mm); +/-3.0mm(5000mm
Product Application:
This machine is used to make steel C Z shape purlins for buildings. Many sizes of purlin can be produced on one machine. The line mainly consist of uncoiler , coil sheet guiding device ,flattening device ,roll forming system , punching equipment ,cutting equipment , hydraulic station ,PLC controlling and support table. We also can produce according to customer's requirement.Used c z purlin cold roll forming machine is a machine can produce many sizes,Generally,there are three types of machine, c purlin machine, z purlin roll forming machine, C Z Section Steel Purlin Machine. The Web width can be 60-300mm Flange height can be 30-80mm, it is adjustable from min to max. The size of holes can be design by customers. This C Z Used Roll Forming Machine consists of uncoiler,feeding and straightening,punching and cutting part, main roll forming part,cutting device and runout table.
Main Parameter of Roll Forming Machine:
No. Item
1. Processing Materialï¼? PPGI,GI
2. Material Width(mm)ï¼? 1220
3. Processing Thickness(mm) ï¼?0.83.0
4. Material of Rollersï¼? 45# steel,with hard chrome coated
5. Diameter of Shaft: Ф80mm
6. Production Speed :8---12m/min
7. Cutting Model :Hydraulic Profile Cutting
8. Control Style: PLC
9. Total Power :15kw
10. Operation Model :380V 50HZ or as buyer's request
11. The size ï¼?7.5-9m
Main Features
Feeding platform
Main molding core
Hydraulic system
Automatic shearing system
Computer control system
High-precision automatic counter
Driven system protective covering
Panel supporting table
Machine Parts
Name: Hydraulic Station
It is controlled by gear wheel oil pump. After filling the hydraulic oil into the hydraulic oil tank ,the pump drive the cutter machine to begin the cutting job.
Main Features
Name:Computer Control Cabinet
It adopts MITSUBISHI PLC to control. The target piece`s length is adjustable and digit of it can be adjusted. Computed mode has two modes: automatic and manual one. The system is easy to operate and use.
rolling door making machine
Shutter door making machine
roller shutter door roll forming machine, automatic rolling door making machine
Product Applicationï¼?
This Iron Steel Rolling Shutter Door Slats Roll Forming Machine Prices line uses galvanized steel sheet, colored armor plate or aluminum plate as the material plate. The products produced by this Iron Steel Rolling Shutter Door Slats Roll Forming Machine Prices are bright in colored, against fading, resistant to rust, and be widely used in shops, working departments, warehouses, and fire partition. Its strength is three times higher than aluminum alloy door.
Technological processï¼?
Uncoiler-Feeding-Leveling-hydraulic punching-Hydraulic cutting-Roll forming-Output table
Technical parameterï¼?
1.Suitable material Color steel sheet , galvanized steel sheet,aluminum sheet
2.Installation Dimension (L*W*H): 6.5m*1.5m*1.4m
3.Main motor power 4KW with Cycloidal reducer
4.Hydraulic station power 4KW
5. Hydraulic oil pump CB-E 310
6.Thickness of material 0.3mm~1.0mm
7.Diameter of principal axis Φ70-90mm
8.Material expand width 1000-1250mm
9.Electric tension 380V 3phase 50HZ or as the customer's requirements
10.Material of roller High grade 45# forged steel plated with hard chrome plating
11.Controlling system PLC
12.Processing speed 8-12m/min(glazed tile is 2-3m/min)
13.Processing precision within 1.00mm (depend on design)
14.Material of cutting blade Cr12 mould steel with quenched treatment
15.Kind of drive 0.6 inch chain link bearing model 6210
16.Roller station 11-20 Rollers
17.Roller material high grade 45#steel; Cr12 quenching
18. Leak frame load-bearing 4.6T
Rollers
In order to get high quality product, our machine adopts welded steel frame structure, AC frequency conversion motor reducer drive, chain transmission, roller surfaces polishing, hard plating, heat treatment and chrome coating.
Roller Station:11-18rows
Or custome an customer's requirements Thickness of feeding materialï¼?0.3-0.8mm
Computer Control Cabinet
It adopts MITSUBISHI PLC to control. The target piece`s length is adjustable and digit of it can be adjusted. Computed mode has two modes: automatic and manual one. The system is easy to operate and use.
Hydraulic Station
It is derived by a Gear Pump. After filling the hydraulic oil into the hydraulic oil tank, the pump could drive the hydraulic cylinder to realize the cutting function.The system includes a set of hydraulic tank, a set of a Gear Pump, two hydraulic pipes .and two sets of Solenoid Valves.
Power of The Pump:4kw
Hydraulic oil :40#
floor decking roll forming machine, decking floor roll forming machine
Product Applicationï
The product produced by these series machine is used for floor decking in building. We need't dismantle the mould after pouring concrete, so we can finish the project as soon as we can. Normally, the raw material for decking floor is glazed galvanized sheet, we neednt decorate the ceiling again, due to it is beautiful enough. This series product is suitable for streel structure factory and public big building.
Technical parameter
ItemsSpecifications
Material of coilMaterial Width1250mm
Material Thickness0.4-0.7mm
Uncoiler5 tons manual
Forming systemRolling Speed6-15m/min
Roller Stations14 stations
Roller Material45# steel, Electroplating 0.02-0.05mm
Material of shaft45 steel
Shaft DIAD76mm
Maim Motor Power15kw
Hydraulic cutting Power5.5kw
Cutting systemMaterial Of CuttingCR12Mov
Tolerance+-1.5mm
Electrical control systemElectric Source380V, 50HZ,3 phase
Control SystemPLC (Panasonic)
Way Of Drive1.5inch single chain
Rollers
In order to get high quality product, our machine adopts welded steel frame structure, AC frequency conversion motor reducer drive, chain transmission, roller surfaces polishing, hard plating, heat treatment and chrome coating.
Roller chrome coated thickness: 0.05 mm.
Product Applicationï¼?
Light steel keel molding machine is used to plaster board, gypsum board and other decorative finishes lightweight board made of non-load-bearing walls and roof of the building style decoration, a variety of decorative building roof shape, inside and out-side the building wall and ceiling scaffolding base material. Used in hotels, terminals, bus terminal, railway stations, theaters, shopping malls, factories, office buildings, old building renovation, interior decoration settings, roof and other places.
Main Technic Parameter:
Light keel roll forrming machine
No. Item Specifications
1 Coil Width according to profile
2Diameter of shaft 80mm
3Forming Speed 8-12meters/min
4Middle plate 18mm
5Material of shaft 45#steel with tempering
6forming thickness 1.5mm-3.0mm
7material of rollers Bearing steel
8Cutting type hydraulic -cutting
9Main power 11kw
10Main frame 300H steel
11Control system PLC
12Brand of electrical parts Delta
13Manual decoiler 5 tons
14Power3 Phase,380 Voltage,50Hz
15Dimensions(L*W*H)About 8*1.2*1.2M
16Weightabout 5 tons
Punching marking making machine
iron aluminum plate punching making machine
Specification:
Dimensionï¼?200cmx190cmx175cm
Weightï¼?350KG
This machine is designed as customered with different dot or pictures.
Packingï¼?
Main machine is nude, the computer control box is packed with wooden frame.
Main machine is nude in the container, the computer control box is packed with wooden packaging.
This producing line is maintained free of charge for 18 months. When the machine is used in China, we will install and debug the machine for free; if it is used at abroad, we will send the professional technician to debug.
Botou Xinbo Machine Making Company mainly produce and sell All kinds of machines and cnc machining services. roll forming machines,C Z purlin machine, deck floor machinesï¼?stud &track light keel machine, T grid machine, downpipe machine,EPS and Rockwool sandwich panel machines for the building structure and all kinds of CNC machining services.
roll forming machine
double layer roll forming machine
Product Applicationï¼?
This type of roof sheet has advantage inclouding beautiful, classical appearance and grace taste.
It can be widely used in village, hotel, exhibition, vocation vallage, family construction and outdoor decorate.
Wall/roof roll forming machine
Suitable to ProcessColor steel sheet Galvanized sheet Iron sheet Aluminum sheet Stainless steel sheet
Width of raw material1000mm/1200mm/12500mm (according to customer requirements)
Rollerscustomized
Dimensions7000*1550*1300mm
Power5.5+4kw
Thickness of sheet0.3-0.8mm
Material of cutting bladeCr12
Diameter of the rollercustomized
Voltage380V(Customized according to customer requirements )
weight5T
Productivity10-18m/min
Control systemPLC control
EPS sandwich panel roll forming machine, roll forming machine,composite board making machine
Product Applicationï¼?
This production line adopts superior technology by pneumatic,electricity,and mechanism,which is the specialized machine for producing color steel sandwich panel.The production speed can be adjusted by stepless speed regulation.The complete line includes uncoiling machine,forming machine,compositing machine(ribs forming,rubber coating,warming up.compositing,hemming,notching,edge processing,pneumatic auto cutting),Its necessary for making wall and roof panel of workshop,storage and so on.
Technical parameterï¼?
Overall power equipment:36 kw
Size of the line:overall length of the line is 28000mm
Voltage380V,50Hz or as customer need
Produced panel thickness50-200mm
Overall width of the line:2200mm(max)
Overall height of the line:2100mm
Overall weight of the line:~20 t
Custom Design cable bridge forming machine, cable bridge forming machine Factory
Dimensionsï¼?780cmx800cmx200cm
This machine is making all kinds of cable bridge panel with holes as customer need or designing as customers' country need.
If you have detail request, pls let us know, we will do our offer and technology to you soon.
Packingï¼?Main machine is nude, the computer control box is packed with wooden frame.
Main machine is nude in the container, the computer control box is packed with wooden packaging.
This producing line is maintained free of charge for 18 months. When the machine is used in China, we will install and debug the machine for free; if it is used at abroad, we will send the professional technician to debug.
Botou Xinbo Machine Making Company mainly produce and sell All kinds of machines and cnc machining services. roll forming machines,C Z purlin machine, deck floor machinesï¼?stud &track light keel machine, T grid machine, downpipe machine,EPS and Rockwool sandwich panel machines for the building structure and all kinds of CNC machining services.
Description: automatic rain gutter pipe forming machine
Dimension: 7000(L) * 1700(W) * 1600mm(H)
Machine weight: Approx. 4.8 T
Frame material: 300 H steel
Thickness of steel plate: 16mm
Forming axis: diameter of 75 mm, 45 # quenched and tempered
45 # forged molding chakra: material, hard chromium plating
Drive: by wheel and chain
The computer automatic control, PLC of Siemens
Line speed: 650 m/h
Production rate: 2.2 T/h (for 0.4-0.5mm sheet)
Coil weight: Max. 8 T
Sheet thickness: 0.3- 0.8 mm
Gear reducer: 5.5 KW planetary cycloidal reducer
Pump station: 4 KW
Power supply: 380V, 50Hz, 3 phase
This roll forming line mainly consists of main frame, pump station, electric control panel and exit roller way etc.
Packingï¼?
Main machine is nude, the computer control box is packed with wooden frame.
Main machine is nude in the container, the computer control box is packed with wooden packaging.
More details:
Size: 8.0M*1.0M*1.0M
Mateiral: Iron
Product Feature: this machine is making Supermarket shelf panel and support panel.
It is very popular in China and Korean market.
We can design the shape and sizes as customer need and we also have our standard designing drawing and szies.
Main machine is nude, the computer control box is packed with wooden frame.
Main machine is nude in the container, the computer control box is packed with wooden packaging.
This producing line is maintained free of charge for 18 months. When the machine is used in China, we will install and debug the machine for free; if it is used at abroad, we will send the professional technician to debug.
