Hot-rolled carbon steel bars:
GOST 535-88, St. 3KP/3PS, St. 5PS as per GOST 380-94:
Shapes (equal and unequal angles):
Dimensions (mm): 20x20x3-4, 25x25x3-4, 32x32x3-4, 35x35x3-4, 25x25x2,5, 32x32x2,5, 35x35x2,5, 40x40x3-4, 40x40x5, 45x28x4, 50x32x4, in bundles up to 5 tons, with length up to 12000 mm (ª100 mm).
Steel grade Mass fraction of elements, %
C Mn Si S P Cr Ni Cu
max max max max max
3KP 0,14-0,22 0,30-0,60 max 0,05 0,050 0,040 0,30 0,30 0,30
3PS 0,14-0,22 0,40-0,65 0,05-0,15 0,050 0,040 0,30 0,30 0,30
5PS 0,28-0,37 0,50-0,80 0,05-0,15 0,050 0,040 0,30 0,30 0,30
Steelgrade Mechanical properties
Ultimate tensilestrength, N/mm2, min Yield strength,N/mm2, min Elongation,S5, %, min
3KP 360 235 27
3PS 370 245 26
5PS 490 285 20
Wire rod :
5, 5-14, 0 mm.
Packing: in coils of 1100-1500 kg, 1500-2100 kg.
The height of a coil is up to 1500 mm, 1750 mm; od - 1250 mm; id - 850 mm.
Binding with wire rods diam. 5, 5-7, 0 mm: 4 radial bindings and 1 transverse binding.
Wire rod + mm as per gost 30136-95 can be also packed in coils up to 550 kg.
Dimensions of a coil: height up to 400 mm; od - 1400-1450 mm; id - 850-900 mm. Binding at 2 places.
The wire rod is produced according to the following standarts:
Wire rod of carbon steel of ordinary quality as per gost 30136-95 (dstu 2770-94);
Steel grade as pergost 380-94 Mass fraction of elements, %
C Mn Si S P Cr Ni Cu
Steel grade Mechanical properties
Ultimate tensilestrength, n/mm2, max Relative contraction, %, min Mass of scale, kg/t, min
1kp 430* 66 10
3kp/ps 540 60 10
Wire rod of low carbon and alloyed steel as per tu 14-15-345-94 (for manufacturing welding wire).
Steel grade Mass fraction of elements, %
C Mn Si S P Cr Ni Al
Max Max Max Max Max Max Max
Sv 08 0, 10 0, 35-0, 60 0, 03 0, 04 0, 04 0, 15 0, 30 0, 01
Sv 08a 0, 10 0, 35-0, 60 0, 03 0, 03 0, 03 0, 12 0, 25 0, 01
Steel grade Mechanical properties
Ultimate tensilestrength, n/mm2, max Relative contraction, %, min Mass of scale, kg/t, max
Sv 08, sv 08a 420 60 10
Wire rod as per american standard astm a 510m.
Steel Bars
Reinforcing steel bars as per astm a615, grades 40 and 60; ## 3-10.
Packing as per request: mini and master coils weighing f_ 1 t, 20-40 feet long.
Chemical composition and mechanical properties as per astm a615.
Reinforcing steel bars uder can/csa g 30.18-m92, class 400w, 10m-30m.
Packing: in bundles, 6 and 12 m long.
Chemical composition and mechanical properties are in accordance with standard can/csa g 30.18-m92.
Reinforcing steel bars as per din 488
Packing: mini -coils up to 2 tons with a fixed number of bars in a bundle. Master coils up to 5 tons with a fixed number of bars in a bundle.
Hot-rolled carbon steel billets
Origin: Ukraine.
TU U 322-00190319-1150-94;
Sizes (mm): 125x125, 150x150.
Packing: not in bundles;
Length is:
90 % fixed, 12000 mm (ª200 mm);
10 % random, 10500 mm - 11700 mm;
Admissible deviation in the square side:
150x150 mm (ª5.0 mm);
125x125 mm (ª4.0 mm);
Diagonal difference in the billet cross-section should not exceed 0.7 of
the sum of maximum deviations in the square side;
Concavity or convexity of the billet faces as well as difference in any
two sides should not exceed half of the sum of maximum deviations in the
square side;
Torsion should not exceed the product of 3 degrees/m, but not more than 18
degrees;
Curvature should not exceed 1.5 %;
Spread of the billet ends in the side or diagonal in the place of cut
should not exceed 10 %.
Standard Export packing
Wheat
Test weight -77 kg/hl min
Moisture - 14, 5% max
Foreign matter -2% max;
Hugberg - 250 sec. Min;
Gluten - 24% min (iso);
Protein on dry basis (n x 5, 7)-.11, 5% min (iso 5983);
Alveograph (w) -160 ed min
Bug damaged kernels - 1% max;
Total contents of radio nuclides v max. 600 beq/kg, radiation dose on the surface of the goods not to exceed v 0.020 mrh/h.
In bulk
