Zy highly efficient vacuum oil purifier
The purifier can remove water, gas and impurities in oil with high efficiency to raise the withstand capability and quality of oil, and ensures a safe operation of power generation equipment, being widely applied to power supply industry and manufacturing enterprise for treatment of non-conformable transformer oil, mutual inductor oil and circuit breaker oil
Wooden case
Two-stage vacuum oil purifier - zyd
ZYD serial double stage vacuum oil purifier is manufactured as per standards which go beyond Chinese legal mandates, the super big absorptive two stage vacuum purifies all insulation oil of power equipment rapidly and in more depth which removes water, gas and impurity in the oil rapidly and effectively with the support of high vacuum and absorption speed. Thus the strength of insulation oil is much increased and the time for oil treatment is shortened.
Features:
1. Manufactured as per standards which go beyond the legal mandates, a primary breakdown voltage can raise 35KV and reduces the harm to the oil caused by normal purifiers due to repeated heating.
2. Big absorption speed double vacuum satisfies the needs of vacuumizing of transformer on an installation or repair site, and the water/gas removal of transformer oil can be completed at same time which shortens significantly the time for oil treatment.
3. A unique gas/water removal system adopting stereo-evaporation technology which rapidly separates the water and gas content in the oil and the system is free of maintenance.
4. A superior purification system with top quality filter core, which can accommodate large quantity of dirt and is densified progressively step by step. The filter core has got a high precision and multi-stage filtration.
5. Imported parts are used for all electric system which ensures operation of the equipment with high performance.
6. An advanced infrared liquid level control system with automatic control, allowing separated operation of manual operators from a machine.
7. Purifiers are equipped with an interlocked safety protective device. I. E, backflow of A oil outlet over pressure can be achieved via an overflow valve, B oil inlet will interlock with heating system which avoids any possible negative impacts caused by mal-operation.
8. Precision oil pumps for designated purpose are used, which have low noise and environmental regulatory compliance is well met.
Wooden case
ZYC Vacuum oil regeneration plant
This machine is widely used in all industry such as power plants, power stations, power companies, metallurgy, petrifaction, machinery, traffic, railways etc. Especially for on site transformer overhauling with 110 KV or over, drastically remove poisonous gases such as firedamp from new oil or imported oil. It's equipped with one special device for additives, which is easy to operate; the additives put into the device is innocuous. The process of depolarization is a physical process and never destroys oil quality, the oil after treatment up to international standard.
Features
1. Just one single pass the breakdown voltage can improve to 45 KV, after three passes the breakdown voltage will get to 75KV, reduce the degree of aging which is from common oil purifier.
2. High speed two- stage vacuum system can vacuities for transformer's on site installation or overhauling, finish removing gases, water, discolor simultaneously, shorten period of oil treatment.
3. Unique degas, dehydration, depolarization system, adopt stereo-evaporation technology, high efficiently remove water, gases, impurities from transformer oil, improve oil quality and dielectric strength.
4. Fine filtration system, five- layer agglomeration filtration from Japan, and super high fine filtration from USA, in combination with several stages of screens with mesh size reduced stage by stage. The filtration precision gets to international standard; NAS 4 Class .The life of filtration is more than one year.
5. Excellent configure; Main fittings from USA, Germany, France, Italy, etc and electrical system imported with original packing, ensure this machine can run safely with high performance and can continuously run about 720 hours.
6. This machine has interlock protector: A. outlet oil can reflux through overflow valve. B. Oil inlet and heater work simultaneously to avoid failure from incorrect operation.
7. High autoimmunization: adopt PLC full automatic system, operate by touching screen, with dynamic display and can connect computer to operate.
8. Advanced infrared liquid-level automatic control system to accomplish fully automatic control.
9. Special oil pumps design and lower noise.
10. Special additives for depolarization, can recover oil color of aged transformer oil to close to new oil color, equipped with flexible unloading device of short time, good efficiency, small quantity. Discolor under vacuum can save cost of treatment, the waste impurities does not pollute environment (it can used to architecture and pave a road).
wooden case
TY Hydraulic oil purifier
TY series purifier solely designed for turbine oil, which adopts a new aggregation and separation technology, is a first Chinese made product aiming at turbine oil's nature of high water content, emulsification, easily emulsifiable, and high impurity content. The product is mainly applied to treatment of turbine oil, which can rapidly and effectively remove the water, gas and impurity in oil, bringing oil back to the specifications of new oil to ensure the a correct running of the unit's regulating and lubricating system, as well as to extend the life time of the unit.
As a result of utilization of the internationally advanced principle of fortified hydrophilic and dehydration, which integrates demulsification, dehydration and precision purification, the product has the capability of on-line break of emulsion, removal of water, acid and impurity which can recover the emulsified turbid turbine oil to limpid and clear oil.
The product is suitable for application to dehydration purification treatment in more depth to turbine oil, hydraulic oil, refrigerating oil, as well as rest of lubricating oil requiring removal of mass water or precision removal of impurity.
Features
1) Latest Chinese and international process which is an integration of gravity method, evaporation method, aggregation method, vacuum separation and mechanical purification.
2) No emulsification agent is used for break of emulsion, but to apply macromolecule magnetic material with strong capability of emulsification and dehydration.
3) Superior large capacity purification system handling more than 4000 tons. It has an automatic reverse flush ability.
4) Imported parts are used for all electric system, which ensures operation of the equipment with high performance
5) Safe, reliable heating system and optimized piping design ensure that there is no fªdead anglefª and oil is completely subjected to purification.
6) Deep purification structure, free of maintenance.
7) An advanced infrared liquid level control system, which is fully automatic.
8) On-line oil purification can be carried out at steamer or water turbine of any grades.
9) Low noise
Wooden case
Tya lubricant oil process machine
Tya series purifier solely designed for lubricating oil is made according to nature of high impurity of lubricating oil including hydraulic oil and mechanical oil, which has features of short time for treatment and high efficiency, enabling fast removal of oil's water, gas, impurity and volatiles such as alcohol, gasoline and ammonia gas. Hence the quality of oil is improved, viscosity of lubricating oil, flash point and other performances are recovered which ensures a correct running of hydraulic system, power system and lubricating system.
It is especially suitable for industries including petroleum, chemical, mine, metallurgy, power, traffic, mechanical manufacture and railway for the recovery and purification of various lubricating oil such as hydraulic oil, mechanical oil, cooling oil, refrigerating oil, gear oil, gasoline engine oil, diesel oil and heat treatment oil.
Features
1) strong capability of removal of impurity, mass and deep precision purification material enable removal of tiny and fine particles in oil.
2) automatic reverse flush ability, which automatically cleans the mass impurity withheld by purifier.
3) advanced medium heat absorption and condensation system
4) pressure protection, auto heating temperature control, device of auto separation of condensate water, easy to handle, safe and reliable.
5) top quality purification material, large capacity of handling impurity, corrosion-proof, high temperature resistant, good mechanical strength, high precision of impurity removal and long lifetime.
6) unique water/gas removal system, which adopts stereo-evaporation technology, multi-oil water separation technology, enabling fast removal of water, gas and impurity in oil.
7) imported parts are used for all electric system, which ensures operation of the equipment with high performance
8) low noise oil pump specially made.
Wooden case
