Edm copper wire
We a company that professionally produces electrode copper wires and tinned copper wire, red copper wire, phosphor bronze wire and some special wires. As well we are professionally to manufacture wires and cables making machinery. Such as wire drawing machine, stainless wire cutting machine, and wire enameling machine. Hongshye enamelled copper wires, are high speed, high accuracy, superior straightness and superior discharge, which are easy for wire feeding, can improve the production. Adopt special material , and adopt japanese advanced machinery and advanced technical provide cheap electrode wires for all kinds of advanced wire edm machinery .And we can accept customer's special requirements
The machine have the following features:
1.Main wire drawing machine and spooler with invert drive maximum speed 1500 meter/minutes.
2.With accumulator to prevent machine stopped during reel changement.
3.Main parts and spooler with high carbon steel plate welded and with harden.
4.Gear box with precision assembling.
5.Wire threading with foot pedal swith.
6.Lubrication circulate 40 Gallon/Minute.
7.Die and drawing capstan with forced feed injection lucrication.
8.A detector for automatic stop for reel full wire break
9.Travers:individual motor
10.Loading and unloading by pneumatics control.
WIRE CONTINOUS ANNEALER
Advantage
1. Compact machine and small dimension.
2. This annealer can be combined with wire drawing machine extruding line, increasing efficient, saving manpower and saving eiergy.
3. Annealer method: SCR control, 3 phase.
4. Voltage adjustment: to control the annealed degree to ensure the good quality of the wire.
5. With an accumulator to prevent machine stopped during reel changing.
Construction
1. Type AC high voltage resistance.
2. A belt and tooth belt to combine wire drawing shaft and annealer shaft low nosie and high efficient.
3. After annealer, an air dryer to dry the wire.
4. Cooling tank capacity 800 litters.
5. Cooling water circulate with 2HP pump and temperature controller.
Excluding the offer
1. Wire welder.
2. Air compressor.
3. Cooling system out of the machine.
4. Air pipe and electronic pipe arrangement which out of the machine.
Standard option
1. An angle detector for accumulator.
2. Belt-one piece.
3. Carbon brush-4 pieces copper.
4. Conductor 4 pieces.
5. Tools 1 complete set.
This kind of machine uses high technologi-cal frequency conversion control and controlling technology of SCM.ot can timing smoothly,braid with high speed and show all breskdown automatically.Meanwhile,it has low noises,strong reliability and good wearability.The spindle stand has automatic lubricative system and safe fire fighting cover.This kind of machine can braid not only copper wires but also other metal wires,such as Mg-AL,alloy wires,stainless steel,and wo on .The Volume of the spindle of this machine is large,while being loaded to capacity,it can be loaded to 1.5 kilogram,comparing with otherkinds of machines,this machine doesn't need change springs but to slightly tune the springs tension when change different speci-fication braiding wires.
TINNING ANNEALER MACHINE
1. Machine composition
Annealing furnace with control cabinet
Circulation cooling system
Drying furnace
Muti-head pay off stand
Tinning machine
Hall off machine
Muti-head take up
2. Machine contruction
A. Annealing
1. Annealer furnace is composed by heating system, thermostat system and annealed pipe.
2. Ceramic reel and ceramic ring composed a wire system, it make copper wire stable to enter the tinning furnace.
B. Cooling system
1. Cooling system is composed by cooling trough, capstan water thermostat system and water level adjustment system.
2. Water temperature control is heated by electric heater to 40-50 degree.
3. Water level adjusting system is by water inlet pipe water outlet pipe. It can control the water level.
C. Dryer
1. Dryer is composed by heating system, wire guiding system and thermostat system.
2. Heating system is made by 21 pieces of electric heater with thermostat to dry the wire and to save the energy.
D. Pay off stand.
1. Two set(right side and left side)pay off stand located under the annealer. Each part off stand can provide 12(or 6 ) pay off total can provide 24(or 32 ) pay reel.
2. Pay off stand has guide roller and guide ring. It make cooper wire stable to enter the annealed the tube.
E. Tinning furnace
1. Tinning furnace is composed by heating system, tinning system and thermostat system.
2. Heating beating system is composed by 15 electric heater. The heater is insulated with machine to ensure the safety of the operator.
3. Tinning system is composed by wire pressing system, die holder and tin tank.
4. Wire pressing system is including wire pressing rollers wire pressing shaft and wire pressing holder, the height is adjustable.
5. Die holder is symmetric with wire press system, the angel and height is adjustable.
6. There is a ceramic ring to fix the cooper wire.
F. Hall off
1. Hall off is composed by main body and rollers.
2. Roller is being balanced and chromium coating.
3. Two fleet of rollers. One fleet is fixed another one is movable. The height and angle is adjustable.
4. Main drive is disco VS(infinite speed ) motor.
5. There is a 1:1 counter meter to calculate the length.
G. Take up
1. Traces motor is infinite drive V. S. motor. Which with a speed reducer.
2. Both side of the take up stand has 13(or 16) motor with1 amper transformer to control.
3. Tensile control is by a amper transformer to control.
4. The height of travers guide shaft can be adjusted.
5. Travers roller are make by thermoplastic. Guide rollers are made by aluminum with ceramic coating to prevent worn out.
Tinned line machine feature
1. 3 temperature control t ensure the temperature stable inside furnace.
2. Fast increasing the temperature with thermostat control to keep the set temperature stable.
3. Stable wire guide system and rapid guide roolers to increase tinning efficient and ensure excellent in quality.
Silver Gain Technology Co., Limited has been specializing in design and manufacture the cold pressure welding machine and dies for wire and cable industry, alloy wire and transformer customer for years. The cold pressure welding technology is a fast, easy and cost-effective method of bonding non-ferrous wire and strip, without using heat, fillers and fluxes. All electric components are passed CE certificate, our cold welder can join copper from 0.10mm to 13.00mm, aluminum from 0.10mm to 25.00mm.
Hopefully we can establish business relationship in the future.
Portable cold welder Model: PB10
1.Industry standard, light hand held welder for use in narrow spaces.
2.Supplied with carry case
3.Material: cast stainless steel.
4.Capacities: Copper/Aluminum wire: 0.10mm-0.50mm
5.External dimension: L110mm* W62mm*H150mm
6.Net Weight: 680g
Desk cold welder Model: DA100
1.Welder can be bench or trolley mounted for ease of movement
2.Double cavity dies available up to 2.50mm
3.Material: cast steel.
4.Capacities:
Copper wire: 1.00mm-3.25mm Aluminum wire: 1.00mm-5.00mm
5.External dimension: L310mm*W190mm*H315mm
6.Net weight: 37kgs
WOODEN CASE
The machine uses frequency controlling technology which is programmable.lt controls machine by torching the screen,it can timing smoothly,weace with highspeed and show all brekdown automatically.Meanwhile it has low noises,strong reliability and good wearability.The spindle has automatcally tension controlling mechanism,automatic lubricative system and safe fire fighting cover.This kind of machine can weav enot only copper wires but also other metal wires,such as MgAL,alloy wires,stainless steel,and so on.The Volume of the spindle of this machines,while being loaded to capacity,it can be loaded to 1.5Kilogram comparing with other kinds of machines,this machine doesn't need change springs but to slightly tune the springs tension when changwe different specificationwires
