CNC machine Spindle Cartridge :
We are a custom-build house with engineering and complete manufacturing of all machine tool spindles, CNC spindles and more. Our operations have been around since before computerized numerical control (CNC) machinery, providing us with a historical look at machine tool spindles from their birth. Automated machining allows companies like yours to perform Turning, debarring, milling, slotting and much more through the use of specialty machine and boring spindles.
Spindle stiffness, accuracy and application-specific tooling are all critical factors in machining excellence
Features of Spindle:
â?¢ The components of spindle are Hardened & Ground to be obtain High Precision and long life.
â?¢ High accuracy bearings class P...3 are used for angular contact match paired.
â?¢ Spindles are lubricated with special imported grease.
â?¢ Our spindles are guaranteed for 1 year for any defect in material.
â?¢ Spindles can be design by as per customers requirement of designs.
Special Purpose Machine (SPM) Face & Center Head
We make face & center Head in which both side of Lony Shafting, Face and Center Bit can be Done at a time. We make Quil type Head as well as Fix type Head.
In Quil type Head, Quil moves fourth and back by hydraulic cylinder with4(inch) Stroke and Center Bit is Done.
In Fix type Head, Head moves fourth back by servo motor or by hydraulic cylinder.
Special Purpose Machine:
(Boring Head, Milling Head & U Drill Head, Fine Boring Head)
Milling Head & U Drill Head:
In Milling purpose Head, we make ISO - 40 & ISO 50 type Head and Head Arbur as per (your) given size.
Fine boring Head (Flanch Motor Mounting):
High-speed Precision Head/NSK Drill Make B7214 A5 TRDBDLP3 Three Nos. In Front and B7212 CTRDLP3 Two Nos. In Rear regular contact fibre age Ball Bearing with Arenol Speech 2.6 Run-out 0.005mm RPM Secp 5000 RPM
Heavy Boring Head (Chiller Head)
We make Superior Head for Heavy Boring work, in which 10mm to 15mm Boring can be done at a time as well as suitable for facing. That is also suitable for Milling. We also make heavy Boring Head for the purpose of water circulation.
We make superior boring bar suitable and fit for all kind of V.M.C machines. We also make fine type heavy boring type boring bars. In boring bar, cartage is both side, one of it is for rough work and another one is for finishing, at single operation. We make every type of SPM machines boring bars.
A jig's primary purpose is to provide repeatability, accuracy, and interchange ability in the manufacturing of products. A jig is often confused with a fixture. A fixture holds the work in a fixed location. A device that does both functions (holding the work and guiding a tool) is called a jig.
We make jig and Fixtures as per your sample, locked by hydraulic cylinder or manual. We can make every kind of small & big fixture.
We make Multi Head Spindle for the purpose of drill more than one hole at time (in single operation) at different P.C.D. as per your requirements.
Which can be widely used to drill products like printed Circuit Boards, Engine heads and other Automobile components. Extremely accurate to drill multi holes at different layouts. It helps to achieve accurate and identical drilled layouts in mass production.
We are manufacturer of all types of Gear Shaper Guide. Used in Gear Shaper Machines. We also make mechanical/conventional gear shaper guides. We have all testing facilities installed in-house. We can make helical guide up to 45 degrees.
We are manufacturer of all types of Gear Shaper Guide. Used in Gear Shaper Machines. We also make mechanical/conventional gear shaper guides. We have all testing facilities installed in-house. We can make helical guide up to 45 degrees.
We are manufacturer of all types of Gear Shaper Guide. Used in Gear Shaper Machines. We also make mechanical/conventional gear shaper guides. We have all testing facilities installed in-house. We can make helical guide up to 45 degrees.
CNC machine Spindle Cartridge :
We are a custom-build house with engineering and complete manufacturing of all machine tool spindles, CNC spindles and more. Our operations have been around since before computerized numerical control (CNC) machinery, providing us with a historical look at machine tool spindles from their birth. Automated machining allows companies like yours to perform Turning, debarring, milling, slotting and much more through the use of specialty machine and boring spindles.
Spindle stiffness, accuracy and application-specific tooling are all critical factors in machining excellence
Features of Spindle:
The components of spindle are Hardened & Ground to be obtain High Precision and long life.
High accuracy bearings class P...3 are used for angular contact match paired.
Spindles are lubricated with specially imported grease.
Our spindles are guaranteed for 1 year for any defect in the material.
Spindles can be designed by as per the customer's requirements of designs.
Collet chuck
Operation to Be Performed:
A collet chuck applies clamping force all around the circumference of the part instead of just at select contact areas. The result is tight concentricity. This can be particularly significant for second-operation work where accuracy relative to the first operation is a concern. Even when a jaw chuck is used for the first operation, a collet chuck may be used for the second operation because of its precision clamping. A jaw chuck with bored soft jaws repeats within 0.0006 to 0.0012 inch TIR. A collet chuck typically provides repeatability of 0.0005 inch TIR or better. The collet chuck can also be adjusted for concentricity during installation to further improve secondary operation.
Our Products:
A-25 Collet Chuck:
A-42 Collet Chuck:
A-60 Collet Chuck:
We hold immense knowledge in providing a commendable range of CNC Collet Chuck A- 42 to our valued customers. These products are widely demanded for its durability and high performance. Moreover, we have a hired team of experts making use of new age machinery to deliver flawless products. We manufacture these products in compliance with international quality standards and offer to our clients at affordable prices.
Features:
- Excellent quality
- Corrosion resistance
- Strongly built
- Easy to handle
- Perfect design
Work piece Dimensions:
Collet chucks are best suited to work pieces smaller than 2 inches in diameter.
A collet chuck may also impose a limitation on the work piece length. Specifically, a collet chuck limits the machine's range of axial (Z-axis) travel, because its length is longer than that of a jaw chuck. When the machining length of a work piece is so long that just about all of the available travel of the machine is needed to cut it, then this requirement will probably dictate the use of a jaw chuck.
Lot Size:
Very large and very small lot sizes both help make the case for a collet chuck.
Where there are small lot sizes and lots of them, the collet chuck's advantage relates to change over time. Swapping jaws takes around 15 to 20 minutes for a standard jaw chuck or 1 minute on a jaw chuck specially designed for quick change, but the collet in a quick-change collet chuck can be changed in 15 to 20 seconds. The time savings add up where changeovers are frequent.
Similar time savings related to clamping add up where lot sizes are large. A collet chuck takes less time to open and close than a jaw chuck, shaving cycle time by reducing the non-cutting time from one piece to the next.
Multi Head Spindle
We make multi Head Spindle for the purpose of more than one hole at single operation at different P.C.D. as per your requirements with grease or oil.
Which can be widely used to drill products like printed Circuit Boards, Engine heads and other Automobile components. Extreme care should be there to drill multi holes at different layouts. It helps to achieve accurate and identical drilled layouts in mass production.
We are manufacturer of all types of Gear Shaper Guide. Used in Gear Shaper Machines. We also make mechanical/conventional gear shaper guides. We have all testing facilities installed in-house. We can make helical guide up to 45 degrees.
Special Purpose Machine (SPM) Face & Center Head
We make face center Head in which both side of Lony Shafting, Face and Center Bit can be Done at a time. We make Quil type Head as well as Fix type Head.
In Quil type Head, Quil moves fourth and back by hydraulic cylinder with4â??(inch) Stroke and Center Bit is Done.
In Fix type Head, Head moves fourth back by servo motor or by hydraulic cylinder.
Special Purpose Machine
(Boring Head, Milling Head & U Drill Head, Fine Boring Head)
Milling Head & U Drill Head:
In Milling purpose Head, we make ISO - 40 & ISO â?? 50 type Head and Head Arbur as per (your) given size.
Fine boring Head (Flanch Motor Mounting):
High-speed Precision Head/NSK Drill Make B7214 A5 TRDBDLP3 Three Nos. In Front and B7212 CTRDLP3 Two Nos. In Rear regular contact fibre age Ball Bearing with Arenol Speech 2.6 Run-out 0.005mm RPM Secp 5000 RPM
Heavy Boring Head (Chiller Head)
We make Superior Head for Heavy Boring work, in which 10mm to 15mm Boring can be done at a time as well as suitable for facing. That is also suitable for Milling. We also make heavy Boring Head for the purpose of water circulation.
This Automatic Medical Face Mask Making. Machine is a semi automatic machine to produce the inside ear-loop face mask. The process is from raw material feeding,
nose wire welding, to the mask cutting. It includes ultrasonic welding technique compare to stitching or gluing, Which provides faster production rate and improves cleanliness and hygiene factor.
This Automatic Medical Face Mask Making. Machine is a fully automatic machine to produce the inside ear-loop face mask. The process is from raw material feeding,
nose wire welding& ear-loop welding to finished product. It includes latest ultrasonic welding technique to stich mask at faster speed and Compared to sewing, ultrasonic technology offers major benefits because it creates high-strength, high-integrity seams and bonds without the need for thread and without creating mechanical holes in fabrics, which can hold and conceal microorganisms or contaminants. It has PLC controllers in it for easy controlling of stepper motors in it.
This is to introduce ourselves as a leading manufacturer of burnishing tool since 10 year.
We have wide range of burnishing tool that made from high quality raw material and designed from our experts.
In order to comply our range with the on-going standards and norms, our diligent professional ensures test this range using stringent measures.
Jig and Fixture
Jig primary purpose is to provide repeatability, accuracy, and interchangeability in the manufacturing of products. Jig is often confused with the fixture.
Jig Fixture holds the work in a fixed location. A device that does both functions (holding the work and guiding a tool) is called Jig Fixture.
We make jig and Fixtures as per your sample, locked by hydraulic cylinder or manual. Every kind of small & big fixture made by us.
Roller burnishing tools
This is to introduce ourselves as a leading manufacturer of burnishing tool since 10 year.
We have wide range of burnishing tool that made from high quality raw material and designed from our experts.
In order to comply our range with the on-going standards and norms, our diligent professional ensures test this range using stringent measures.
Applications
For interior of hydraulic oil brake cylinders
Internal surface and taper seat surface valve bodies
Internal surface of bushing for connecting rod
Holes for inserting bearing size
Hole finishing of piston
All type of gears
Submersible parts and electric motor parts
Oil engine parts and body
Internal surface of gun barrels
Internal surface of brass liner for torque convertors
All type of engineering parts
