Hot melt sealant information:
Colour:Black.
Density:1.16g/m³.
Extruding temperature:160-185.
PPacking units:5kg/pc,30kg/box,Further packaging units on requst.
Characteristics:
Very low water vapor and gas permeability improved temperature resistance in the insulating glass,Optimisted adhesion to glass and the fine sealant due to additional chemical bonding.Fast cooling and quick drying soon.
Application guide:
1.Process is simple with good sealing effect.
2.Save storage,sealant immediately installation of glass after sealing.
3.Non-toxic tasteless,clean production environment.
4.Low cost,can reduce production temperature range:10-40.
Product description:
Large expansion Pu foam sealant is an one-component,self-expanding,multipurpose polyurethane foam.This foam will expand and cure by moisture in the air.It is used for a wide range of building applications.It is very good for filling and sealing with excellent mounting capacities,high thermal and acoustical indulation.Higher expansion rate than normal Pu foam.
Advabtage:
(1)Can apply around 70 meters(30mm*15mm).
(2)Most cost effective for each window or door.
(3)No shrinkage and craking after cured.
(4)Better adhesion and harder.
Construction guide:
(1)Shake can vigorously for one minute before use.
(2)Clean and pre-moisten surface before use.
(3)Firmly screw can on adapter,and turn the flow adjustment screw anticlockwise.
(4)Fill vertical joints from the bottom up whenhalf filled enough.
(5)Foam begins to cureabout ten minutes,wait for one hour before doing the next step.
(6)Use knife to smooth out cured foam and treat surface with cement paint or silicone.
Usage scenario:
Wide range of applications,including:mounting,sealing,filling and onsulating General purpose one-compoent polyurethane foam suitable for filling,insulating,sealing,mounting,caulking,stopping and soundproffing of large and small holes in cocrete,plaster,brick,floorboards,glass or wood.It is specially recommended for mounting of windows and doorframes,heat insulation of sewerage and central heating,fixing and isolating of wall panels and more ecification.
Butyl sealant information:
Material:Butyl rubber.
Colour:Black.
Introduction:
It is one-part,solvent free.No cracking in a wide temperature range.It has good adhesion to glass,aluminum alloy,zinc plating steel,stainless steel and etc.It can offer aan excellent humidity proof system with elasticity.
1.Appearance:homogeneous black putty.
2.Odor:odorless.
3.Density:1.06g-1.29g/cm³.
4.Suitable temperature:-40+80,keep the surface and edges from cracking and sagging.
5.Extruding temperature:about 120~150
Product features:
1.Single group,deac etate,room temperature curing silicone glass glue.
2.Fast curing speed and easy to use.
3.Good bonding performance with most building materials.
4.Superior thixotropy with no seasonal restrictions.
The main purpose:
1.All kinds of glass projects are bonded and sealed.
2.All kinds of glass doors and windows are sealed.
3.All kinds of interior decoration and sealing.
Butyl spacer information
Size:6-16mm
Width:8-18mm by 1mm increment/6-9mm:6.5mm thickness
Thickness:10-12mm 6.7mm thickness/13-16mm 7mm thickness
Product Features:
1.Width:8-18mm by 1mm increment
2.Increasing sealing property during the glass : the sealing property of our spacer is better than other similar ones duing to the application of the imported butyl rubber from Germany .
3.High moisture absorption properties: the butyl spacer include desiccant can absorb moisture improve significantly, so it can extend the life of insulating glass .
4.Butyl spacer is the framework which is composed of aluminum strip,plastic insulation strip,, the tensile strength has greatly improved.
5. Good low temperature resistance .
6.Warranty :10 years , For testing ,the butyl spacer can be used about 30 years .
7.Usage: All the glass should be dry and clean and the butyl spacer have two usages are as follow:
A. You can use the Insulating Glass butyl spacers separately;
B. You can spread single-component hot melt burly or Polysulfide adhesive on the outside of the Insulating Glass spacer, to enhance its structure.
Akuminum spacer bar infornation
Material:Pure aluminum
Colour:Black,white,clear or customized
Size:5.5mm-27mm
Height:6.5mm
Advange
1.Two kinds:Bendabe and Non-bendable.
2.No oxidation,No corrosion,it is not easy to oxidated and corrosive in rainy place usually or damp place,so it will be better for insulating glass life.
3.The surface is high brightness,neat and smooth,and no bumps
4.Eliminate welding defects,double row of holes,uniform hole penetration and good linearity.
5.The air hole is not influence to usage of molecular and it can ensure the activity of the molecular sieve,be bonded with various sealants well.
6.With high strengh,good toughness,non-deformation and dimensional stable.
Warm edge strip information
Width:10mm-60mm or as your requirements
Thickness:0.4mm-3mm or as your requirements
Material:We can make pvc,abs,pmma,3D,acrylic pvc edge banding ,etc
Surface:Soid colour,wood grain,high gloss,embossing
Packing:50m/100m/150m/200m per roll,5 rolls/10 rolls/15 rolls per carton or as your requirements.Customized design,logo,words or labels can be on cartons.
Size:6-16mm by 1mm increment
Hard warm edge information:
Material:Stainless.
Width:5.5mm-27mm.
Colour:Black,white,yellow,red,blue,golden.
Length:5M.
Kinds:Bendable and Non-bendable.
Product advantage:
1.No oxidation,No corrosion.It is not easy to oxidated and corrosive in rainy place usually or damp place,so it will be better for insulating glass life.
2.The surface is high brightness,neat and smooth,and no bumps.
3.Energy saving and environmental protection,low heat transfer coefficient.
4.Three kinds:All stainess,Stainless+glassfiber,All glassfiber.
5.The color is varities and it can be customized.
CNC glass processing machine information:
Power:17.5kw.
Machine(L*W*H):5000*2450*2200(mm).
Machine weight:5500kg.
Features:
1.Fully automatic machining of drilling,grinding and polishing of flat glass different thickness and sizes.
2.High-tech processing center,cost-effective,to meet the needs of developing high-quality,high-efficiency products.
3.Constant current polishing technology to ensure the brightness and stability of the polishing effect.
4.With suction cup to prevent silding mbackflush function makes glass loading and unloading simple and convient.
5.High-precision ball screw and guide rail drive ensure high-quality products.
6.Aitomatic lubrication system to enhance equipment durability and stability.
Vertical glass washing machine information:
Max glass processing width:2500mm/2200mm.
Min glass processing size:450*450mm.
Glass thickness:3-19mm.
Working speed:1-7m/min.
Power:380V/50HZ.
Features:
1.Vertical glass washing machine is key equipment of manufacturing and processing insulating glass in architecture,building material and decoration.The machine can wash 3-12mm thickness flat glass.
2.The machine mainly consists of Washing Section,Drying Section,Drive System,Machine Frame,Tank,Blower,Electric Control System and other parts.During the whole process,the machine works automatically,and no need manual operation.
3.Washing and drying part can open for easy maintenance,max,opening 200mm.
4.Conveyor rollers are vulcanized and rectified,bbeing made with NBR(nitrile-butadiene rubber).Roller diameter is 80mm.
5.170mm flocking bristles brushes.Last soft brush is for Low-E and coat glass.Brush axes are in stainless stell.Water tanks are built with wheels for easy removal and cleaning and equipped with "fast plugs"so they can be easily drained without any disassembly.
Horizon glass washng machine information:
Unit weight:1000kg.
Glass thickness:2-19mm.
Min glass size:250*250mm.
Max processing glass with:1600mm.
Max height:400mm.
Features:
Glass washing machine adopts horizontal structure for cleaning and drying on flat glass,with standard series,coated film series and LOW-E.Procedures:Loading seaction-cleaning seation(three grades washing)-Drying section(18KW air dryer)-off-loading section.it's a necessary machine on glass deep processing.
Molecular sieve information :
Shape:Kernel.
Colour:Light brown,light red,light yellow,light gray.
Storage:Save in a cool place.
Weight:2.5kg.
Size:3A,4A,5A,13X.
Molecular Sieve 3A
Recommended Application
1.Dehydration of refrigerant.
2.Drying of highly polar compounds,such as methanol and ethanol.
3.Drying of unsaturated hydrocarbons (e.g.ethylene, propylene , butadiene).
4.Static,(non-regenerative)dehydration of insulating glass units,whether air filled or gas-filled.
5.Drying of natural gas, if COS Minimization is essential or a minimum co-adsorption of hydrocarbons is required.
Molecular Sieve 4A
Recommended Application
1.Dehydration of electronic element, pharmaceutical , food,etc.
2.Drying and removing of CO2 form natural gas,LPG,air,insert and atmospheric gases,etc.
3.Removal of hydrocarbons,ammonia and methanol from gas streams (ammonia syn gas treating).
4.Dehydration of refrigerant and air in the air break unit of buses,trucks and locomotives.
Molecular Sieve 5A
Recommended Application
1.Separation of normal-and iso-paraffins.
2.Production of high purity N2,O2,H2 and insert gases from mixed gas streams .
3.Remove water,CO2,H2S from sour natural gas streams , while decreasing COS formation.
Molecular Sieve 13x
Recommended Application
1.Separation of enriched oxygen from air.
2.Production of medical or bulk oxygen in PSA units.
3.Removal of co2 and moisture from air (air pre-purification)and other gases.
4.Catalyst protection , removal of oxygenates from hydrocarbons(olefin streams)
5.Removal of mercaptans and hydrogen sulphide from hydrocarbon liquid streams such as LPG, butane, propane etc.
Molecular sieve filling machine information:
Molecular sieve diameter:0.5-0.8mm.
Filling speed:3s/1000*1000*9mm(biateral).
Aluminum strip width:6-24mm.
Maximum size:2000*2000mm.
Air pressure:0.6MPA.
Power:220V/50HZ.
Specifition of the machine:1680*1080*3050(L*W*H)mm.
Performance characteristics:
1.Adopt PLC control system,touch screen man-machine interface.
2.Can be filled with automatic bending forming aluminum frame and ordinary pin aluminum frame.
3.Filling height can be adjusted according to the size of the aluminum frame.
4.Automatic sealing of molecular sieve pore kinetic energy.
5.Molecular sieve filling automatic detection system.
6.Fillable stainless steel frame.
Aluminum bar bending machine information:
Aluminum weight:5.5~24mm.
Maximum size of producessed aluminum bar:2000*2000mm.
Minimum size of producessed aluminum bar:250*250mm
Aluminum bar transfer speed:120m/min.
Working speed:For 30 seconds(1000*1000mm).
Power:380V/50HZ.
Boundary dimension:1050*2100*2200(L*W*H).
Performance introduction:
1.Using the world's leading German Siemens PLC program control,superior performance and accurate operation.
2.The touch screen operation is simple and intuitive,and the picture is real.
3.Using Japanese Fuji servo motor feeding and bending,it can fold any shape of straight line,angle and round orphan combination.
4.Four storage tanks can be placed in 4 kinds of aluminum strips,and the maximum number of continuous processing can reach 9999poeces.
5.It can set the size of aluminum frame of 32 kinds of specifications.The aluminum frame of the same size can be processed continously,and the aluminum strip is automatically continued.
6.Automatically avoid aluminum strip joints during bending and cutting,and autonatically cut after bending.
7.Manually bebug each action for easy equipment maintenace.
Butyl extruder machine information:
Machine sizes:3000*600*950(L*W*H)mm.
Spacer width:250mm*250mm.
Speed:0-25m/min.
Butyl volume:14L(blocks).
Power source:380V/50HZ.
Total power:3.75kw.
Air pressure:8kgf/.
Features:
1.Automatically adjust the distance between two nozzles according to the width of the aluminum strip,up to 25mm.
2.Hydraulically actuatable two-way system ensures stability.
3.Working speed can be adjusted to 0~35m/min.
4.Can process curved aluminum frame.
5.PLC and touch screen control.
6.You can choose to start regularly.
7.The maximum amount of glue is 14L.
8.The device comes with a glue shortage alarm system.
Better sealing:Using german imported butyl rubber ,the sealing will be good.
Better water vapor barrier: Extra long water vapor barrier, it prevent the water vapor to coming in.
Better production efficiency , can process various shapes of anisotropic insulating glass.
Good air tightness : Polymer binder prevent water vapor to permeating. Good anti-high temperature perfermance.
Good resistance to low temperature.
Good anti-aging performance.
EVA glass liminating machine information:
Machine size:4900*3000*1950(L*W*H)mm.
Glass size:2500*3600mm.
Heating power:36Kw.
Circle time:100min.
Frequency:50HZ/60HZ.
Brief description:
1.It's oa great machine to make laminated glass by EVA film,you can insert silk,paper or other materials into glass sheets for decorative glass or functional glass.
2.With our glass laminating Machine,you can process top glass as below:External safely laminating glass,Smart(PDLC)GLASS AND etc.
Conposite rubber spacer information
Colour:Black/white
Size:6-16mm
Type:Construction industry
Shape:Custom shape
Composite rubber spacer advantage:
1.Good sealing property:Vapor barrier longer,water is not easy to enter.
2.Good air tightness.
3.High production efficiency:no need to plug,the rubber strip can be arbitrarily bent,anisortropic insulating glass processing all kinds of shape.
40High/Low temperature resistance.
5.Single seal and conveince
Composite rubber spacer type:Insert type composite rubber strip,common composite rubber strip and black/white composite rubber spacer
Two-component silicone sealant information.
Colour:A-white/B-black.
Net capacity:A-190L/B-19L.
Features:
1.Two-component,adjustable curing speed,fast curing in the deep,suitable for construction in the factory;
2.Neutral curing,non-corrosive to building materials such as metal and coated glass;
3.High modulus,high strengh;
4.Excellent resistance to high and low temperature.It will not become brittle,hardwn or crack at 50 after curing .It will not soften and degrade at +50,and always maintain good strengh and elasticity.
5.Good compatibility with other neutral silicone adhesives.
