INSTALLATIONS
Weight Measurement Range: 0T~400T.
Resolving Ability: 0.1T.
Synthetic Errors: â?¤5%F.S.
Equipped with Output Interface RS485.
Working Condition: ï¼?20ï½?60.
Relative Moisture under Working Condition: 90%RHï¼?20ï¼?.
Working Voltage: AC220V±25%.
Preset Output Contact Capacity: AC220V 7A.
IP Grade: weight sensor with IP68; Monitor with IP64.
INSTALLATIONS
Weight Measurement Range: 0T~400T.
Resolving Ability: 0.1T.
Synthetic Errors: â?¤5%F.S.
Equipped with Output Interface RS485.
Working Condition: ï¼?20ï½?60.
Relative Moisture under Working Condition: 90%RHï¼?20ï¼?.
Working Voltage: AC220V±25%.
Preset Output Contact Capacity: AC220V 7A.
IP Grade: weight sensor with IP68; Monitor with IP64.
WTAU brand WTL-A700 LMI system
it's a kind of Crane safety protection device , function as belows:
1)Alarm, in case of over load
2)Stop instantly in case of over load
3)Show Live Weight while in operation
4)Prevent overload
5)Crane Movement Control
6)Allows user to collect data in .txt format
7)Increase crane working life and life cycle
The Safe load indicator (SLI) has been designed to provide safety of the crane operation, with a continuous display
of all the essential information needed to enable the crane to be used within its design parameters.
SLIs have sensors to measure Load, Angle (from horizontal 0 to vertical 90 degree) & boom length. It has a 8
inch color touched LCD display for clear visibility, Overload alarm /Cut-off system, LED for overload, over hoist & Bypass on unsafe condition.
WTAU WTL-A700 lmi function:
load moment indication systems (LMI) help to prevent the operator from lifting excessive loads what could cause equipment collapse or tip over.
Loads calculated by the LMI are verified against load charts. If a load exceeds the limit indicated in the chart, safety-related functions are activated and a cut-off is triggered.
Anytime a load is lifted, the potential for overload is present. Accurate measurement of the load is critical to preventing dangerous overloads.
WTL-A200 Load Moment Indicator is a new type of smart weigh overload protector, which measures the changes of the weight of the loaded goods by a preset weight sensor and displays the actual load instantly on the display instrument. When the load reaches the given point of rated load, the acousto-optic alarm of the hoisting weight limiter will be triggered, with the switching value output displayed. The whole system is composed of sensor, connecting cable, microcomputer host and so on.
The device is designed and manufactured in accordance with requirements of GB 12602-2009 Lifting Machinery Overload Protection Devices and GB / T 3811-2008 Crane Design Specification. With reasonable layout, easy installation, simple operation, WTLA200 Load Moment Indicator works well with high accuracy and other advantages.
INSTALLATIONS
Weight Measurement Range: 0T~400T.
Resolving Ability: 0.1T.
Synthetic Errors: 5%F.S.
Equipped with Output Interface RS485.
Working Condition:20 60.
Relative Moisture under Working Condition: 90%RH20
Working Voltage: AC220V±25%.
Preset Output Contact Capacity: AC220V 7A.
IP Grade: weight sensor with IP68; Monitor with IP64.
load moment indicator is a kind of Crane safety protection device , function as belows:
1)Alarm, in case of over load
2)Stop instantly in case of over load
3)Show Live Weight while in operation
4)Prevent overload
5)Crane Movement Control
6)Allows user to collect data in .txt format
7)Increase crane working life and life cycle
Weite Technologies CO.,ltd is the china Top 3 OEM manufacturer of crane safety equipments (LMI systems ).
Such as load moment indicator , crane computer , load sensor , angle sensor , anemometers , limit switch etc.
WTZ-A300 Overload Limiter is a smart weigh overload protector, which measures the changes of the weight of the loaded goods by a preset weight sensor and displays the actual load instantly on the display instrument. When the lo
1. Display
Load moment indicator(also called as"crane computer" or "safe load indicator") can be in form of LCD dynamic graphics and comprehensive display the various parameters in the process of work. As the main hook load, auxiliary hook load,boom Angle, length, working radius, etc.;
Alarm function
Sound and light alarm function: when the crane boom work amplitude limit close to work, when lifting load and torque device close to the permitted load limit, torque system issued a warning of slow beeping sound. Warning lights flashing slowly torque system.
When jib frame work scope to work limit, when the lifting load and torque reaches equipment when the permitted load limit moment send urgent alarm beeping sound. Shortness of torque system alarm indicating red light flashing.
Torque protection function
Control output function: when boom amplitude limit close to work, work when lifting load and torque device close to the permitted load limit, the system output torque control signal to stop the crane continue to continue to run in the direction of risk, allow crane moves in the direction of security.
2. Data control box
3. SHL Rope Rider three-pully load sensor
4. Boom angle-length sensor
5. GJ type A2B switch
WTZ-A300 Overload Limiter is a smart weigh overload protector, which measures the changes of the weight of the loaded goods by a preset weight sensor and displays the actual load instantly on the display instrument. When the load reaches the given point of rated load, the acousto-optic alarm of the hoisting weight limiter will be triggered, with the switching value output displayed. The whole system is composed of sensor, connecting cable, microcomputer host and so on. The device is designed and manufactured in accordance with requirements of GB 12602-2009 Lifting Machinery Overload Protection Devices and GB / T 3811-2008 Crane Design Specification.
crane lmi screen wtl-a700
load moment indicator is a kind of Crane safety protection device , function as belows:
1)Alarm, in case of over load
2)Stop instantly in case of over load
3)Show Live Weight while in operation
4)Prevent overload
5)Crane Movement Control
6)Allows user to collect data in .txt format
7)Increase crane working life and life cycle.
WTL-A220 Load Moment Indicator is a new type of smart weigh overload protector, which measures the changes of the weight of the loaded goods by a preset weight sensor and displays the actual load instantly on the display instrument. When the load reaches the given point of rated load, the acousto-optic alarm of the hoisting weight limiter will be triggered, with the switching value output displayed. The whole system is composed of sensor, connecting cable, microcomputer host and so on.
The device is designed and manufactured in accordance with requirements of GB 12602-2009 Lifting Machinery Overload Protection Devices and GB / T 3811-2008 Crane Design Specification. With reasonable layout, easy installation, simple operation, WTLA220 Load Moment Indicator works well with high accuracy and other advantages
Weight Measurement Range: 0T~400T.
Resolving Ability: 0.1T.
Synthetic Errors: â?¤5%F.S.
Equipped with Output Interface RS485.
Working Condition: ï¼?20ï½?60.
Relative Moisture under Working Condition: 90%RHï¼?20ï¼?.
Working Voltage: AC220V±25%.
Preset Output Contact Capacity: AC220V 7A.
IP Grade: weight sensor with IP68; Monitor with IP64.
150 ton crawler crane load moment indicator kato load moment indicator is a kind of Crane safety protection device , function as belows:
1)Alarm, in case of over load
2)Stop instantly in case of over load
3)Show Live Weight while in operation
4)Prevent overload
5)Crane Movement Control
6)Allows user to collect data in .txt format
7)Increase crane working life and life cycle
ur LMI systems is an independence systems , can match to each kinds of cranes , no matter Manitowoc , terex , demag , liebherr ,
or gove , tadano , kato , sumitomo , kobelco , all of them can use our system.
SUPERIORITY RELIABLE
ISOã??CEã??CCS certificationã??quality and reliable
Time monitoring crane job data
Unexpected power outages data protection features
Visual and auditory dual alarm
With the operating data loggingcapabilitiesã??dangerous operation to return to the view
Give full consideration to the work siteã??wterproof and dustproof anti-colision
PRACTICAL
On-line monitoring project
The cumulative load weight record
Cumulative time record
Main hook and roe maintenance tipe
INTUITIVE
Full screen display various data ã??all information can be seen
Display graphics fit your crane device
Dynamic display can simulate craneï¼?instrumentï¼?of the specified type
Sytem operation simpleã??intelligent human-computer interaction
FLEXIBLE
Chinese and english interface
Compateible with all types of sensors on the market
Applicable to all types of crane
Widely output signal types
PRODDUCTIVE FORCESY
Ensuring crane safe ã??reliable and efficient operation
Suppouted operating data downloadï¼?remote function available on-line analysis and diagnosisï¼?
Intuitive graphical display provides the operator with a quick reference
Reliable after-sales team to respond to your needs in a timely manner
1. Display
Load moment indicator(also called as"crane computer" or "safe load indicator") can be in form of LCD dynamic graphics and comprehensive display the various parameters in the process of work. As the main hook load, auxiliary hook load,boom Angle, length, working radius, etc.;
Alarm function
Sound and light alarm function: when the crane boom work amplitude limit close to work, when lifting load and torque device close to the permitted load limit, torque system issued a warning of slow beeping sound. Warning lights flashing slowly torque system.
When jib frame work scope to work limit, when the lifting load and torque reaches equipment when the permitted load limit moment send urgent alarm beeping sound. Shortness of torque system alarm indicating red light flashing.
Torque protection function
Control output function: when boom amplitude limit close to work, work when lifting load and torque device close to the permitted load limit, the system output torque control signal to stop the crane continue to continue to run in the direction of risk, allow crane moves in the direction of security.
2. Data control box
3. SHL Rope Rider three-pully load sensor
4. Boom angle-length sensor
5. GJ type A2B switch
WTL-A200 Load Moment Indicator is a new type of smart weigh overload protector, which measures the changes of the weight of the loaded goods by a preset weight sensor and displays the actual load instantly on the display instrument. When the load reaches the given point of rated load, the acousto-optic alarm of the hoisting weight limiter will be triggered, with the switching value output displayed. The whole system is composed of sensor, connecting cable, microcomputer host and so on.
The device is designed and manufactured in accordance with requirements of GB 12602-2009 Lifting Machinery Overload Protection Devices and GB / T 3811-2008 Crane Design Specification. With reasonable layout, easy installation, simple operation, WTLA200 Load Moment Indicator works well with high accuracy and other advantages.
INSTALLATIONS
Weight Measurement Range: 0T~400T.
Resolving Ability: 0.1T.
Synthetic Errors: â?¤5%F.S.
Equipped with Output Interface RS485.
Working Condition: ï¼?20ï½?60.
Relative Moisture under Working Condition: 90%RHï¼?20ï¼?.
Working Voltage: AC220V±25%.
Preset Output Contact Capacity: AC220V 7A.
IP Grade: weight sensor with IP68; Monitor with IP64.
SUPERIORITY RELIABLE
ISOã??CEã??CCS certificationã??quality and reliable
Time monitoring crane job data
Unexpected power outages data protection features
Visual and auditory dual alarm
With the operating data loggingcapabilitiesã??dangerous operation to return to the view
Give full consideration to the work siteã??wterproof and dustproof anti-colision
PRACTICAL
On-line monitoring project
The cumulative load weight record
Cumulative time record
Main hook and roe maintenance tipe
INTUITIVE
Full screen display various data ã??all information can be seen
Display graphics fit your crane device
Dynamic display can simulate craneï¼?instrumentï¼?of the specified type
Sytem operation simpleã??intelligent human-computer interaction
FLEXIBLE
Chinese and english interface
Compateible with all types of sensors on the market
Applicable to all types of crane
Widely output signal types
PRODDUCTIVE FORCESY
Ensuring crane safe ã??reliable and efficient operation
Suppouted operating data downloadï¼?remote function available on-line analysis and diagnosisï¼?
Intuitive graphical display provides the operator with a quick reference
Reliable after-sales team to respond to your needs in a timely manner
WTAU brand WTL-A700 LMI system
it's a kind of Crane safety protection device , function as belows:
1)Alarm, in case of over load
2)Stop instantly in case of over load
3)Show Live Weight while in operation
4)Prevent overload
5)Crane Movement Control
6)Allows user to collect data in .txt format
7)Increase crane working life and life cycle
The Safe load indicator (SLI) has been designed to provide safety of the crane operation, with a continuous display
of all the essential information needed to enable the crane to be used within its design parameters.
SLIs have sensors to measure Load, Angle (from horizontal 0 to vertical 90 degree) & boom length. It has a 8
inch color touched LCD display for clear visibility, Overload alarm /Cut-off system, LED for overload, over hoist & Bypass on unsafe condition.
WTAU WTL-A700 lmi function:
load moment indication systems (LMI) help to prevent the operator from lifting excessive loads what could cause equipment collapse or tip over.
Loads calculated by the LMI are verified against load charts. If a load exceeds the limit indicated in the chart, safety-related functions are activated and a cut-off is triggered.
Anytime a load is lifted, the potential for overload is present. Accurate measurement of the load is critical to preventing dangerous overloads.
Our load moment indicator is a kind of Crane safety protection device , function as belows:
1)Alarm, in case of over load
2)Stop instantly in case of over load
3)Show Live Weight while in operation
4)Prevent overload
5)Crane Movement Control
6)Allows user to collect data in .txt format
7)Increase crane working life and life cycle
Weite Technologies CO.,ltd is the china Top 3 OEM manufacturer of crane safety equipments (LMI systems ).
Such as load moment indicator , crane computer , load sensor , angle sensor , anemometers , limit switch etc .
Our advantages :
1.Manufacturer , directly communicate whatever technical or price, delivery terms.
2.Full experience, already exsit for 16 years with own core technical, and cooperate with TAT HONG group,ASIA Group. Lemo Group.
Big Crane.TTS .Tiong Woon.Public crane.key prospect.CNOOC ( only one pointed manufacturer).CCCC. Sinopec.CNPC
3.Good service. we have a engineer team for design and research, maintenance and after-sales.
4.Easy for installing. already install in Singapore. Malaysia, Indonesia. Iran. UAE. Saudi Arabia . Qatar .Myanmar. India. Thailand. Taiwan. Vietnam. Bolivia . American . Nigeria .....
Our LMI systems sold out more than about 200 units at singapore market , more than 100 units at indonesia market , more than 50 units at south america and africa market .
Our LMI systems is an independence systems , can match to each kinds of cranes , no matter Manitowoc , terex , demag , liebherr ,
or gove , tadano , kato , sumitomo , kobelco , all of them can use our system.
Whenever your company has crane LMI systems problems , just call me , we can help you to solve it .whatsapp: +8615507209968 info@wtau.com
Our load moment indicator is a kind of Crane safety protection device , function as belows:
1)Alarm, in case of over load
2)Stop instantly in case of over load
3)Show Live Weight while in operation
4)Prevent overload
5)Crane Movement Control
6)Allows user to collect data in .txt format
7)Increase crane working life and life cycle
Weite Technologies CO.,ltd is the china Top 3 OEM manufacturer of crane safety equipments (LMI systems ).
Such as load moment indicator , crane computer , load sensor , angle sensor , anemometers , limit switch etc .
Our advantages :
1.Manufacturer , directly communicate whatever technical or price, delivery terms.
2.Full experience, already exsit for 16 years with own core technical, and cooperate with TAT HONG group,ASIA Group. Lemo Group.
Big Crane.TTS .Tiong Woon.Public crane.key prospect.CNOOC ( only one pointed manufacturer).CCCC. Sinopec.CNPC
3.Good service. we have a engineer team for design and research, maintenance and after-sales.
4.Easy for installing. already install in Singapore. Malaysia, Indonesia. Iran. UAE. Saudi Arabia . Qatar .Myanmar. India. Thailand. Taiwan. Vietnam. Bolivia . American . Nigeria .....
Our LMI systems sold out more than about 200 units at singapore market , more than 100 units at indonesia market , more than 50 units at south america and africa market .
Our LMI systems is an independence systems , can match to each kinds of cranes , no matter Manitowoc , terex , demag , liebherr ,
or gove , tadano , kato , sumitomo , kobelco , all of them can use our system.
Whenever your company has crane LMI systems problems , just call me , we can help you to solve it .whatsapp: +8615507209968 info@wtau.com
Load moment indicator(also called as"crane computer" or "safe load indicator") can be in form of LCD dynamic graphics and comprehensive display the various parameters in the process of work. As the main hook load, auxiliary hook load,boom Angle, length, working radius, etc.;
WTZ-A300 Overload Limiter is a smart weigh overload protector, which measures the changes of the weight of the loaded goods by a preset weight sensor and displays the actual load instantly on the display instrument. When the load reaches the given point of rated load, the acousto-optic alarm of the hoisting weight limiter will be triggered, with the switching value output displayed. The whole system is composed of sensor, connecting cable, microcomputer host and so on. The device is designed and manufactured in accordance with requirements of GB 12602-2009 Lifting Machinery Overload Protection Devices and GB / T 3811-2008 Crane Design Specification.
