6061 aluminum alloy is a high-quality aluminum alloy produced by heat treatment pre-stretching process. Its strength can not be compared with 2XXX series or 7XXX series, but its magnesium and silicon alloys have many characteristics, and it has excellent processing performance and excellent welding characteristics. It has excellent characteristics such as electroplating property, good corrosion resistance, high toughness and no deformation after processing, compact and defect-free materials, easy polishing, easy filming and excellent oxidation.
Main use: Widely used in various industrial structural parts requiring high strength and high corrosion resistance, such as manufacturing trucks, tower buildings, ships, trams, railway vehicles. 6061 typical use representative applications include aerospace fixtures, electrical fixtures, communications, and also widely used in automated mechanical parts, precision machining, mold manufacturing, electronic and precision instruments, SMT, PC board solder carriers and so on.
Tu2 has extremely low oxygen and impurity content, high purity, electrical conductivity, excellent thermal conductivity, good ductility, low gas permeability, no "hydrogen disease" or very little "hydrogen disease"; processing properties and welding, corrosion resistance and cold resistance Good material.
Inconel 718 alloy has the following characteristics:
1. Easy processing
2. High tensile strength, fatigue strength, creep strength and breaking strength at 700 °C
3. High oxidation resistance at 1000 ° C
4. Stable chemical properties at low temperatures
5. Good welding performance
Alloy K500 is a precipitation hardened nickel-copper alloy that combines the excellent corrosion resistance of 400 alloy with higher strength and hardness and outperforms other nickel-copper alloys. Adding titanium and aluminum elements, the tensile strength of K500 is doubled to 400 alloy, and the yield strength is three times that of 400 alloy.
Monel K500 application area
Chemical processing industry
Maritime engineering
Oil and gas extraction
Parts manufactured by Monelk500:
Centrifugal pump
Oil and gas extraction equipment parts
transmission shaft
Pump shaft
spring
Valve and valve parts
1Cr11Ni2W2MoV steel is a kind of ferrite forming element which reduces the austenite phase region, such as W, Mo, V, etc., in the low carbon 12% Cr steel, so that the steel has martensite transformation hardening ability, and the obtained one New martensitic heat resistant stainless steel. The steel has good comprehensive mechanical properties and has been widely used in the aviation industry to manufacture important parts such as engine blades, discs and shafts operating below 600 °C.
304 steel pipe is the most widely used as stainless steel, food equipment, general chemical equipment, and atomic energy industrial equipment. The 304 steel pipe is a versatile stainless steel pipe that is widely used to produce equipment and parts that require good overall performance (corrosion resistance and formability). 304 steel pipe has excellent stainless corrosion resistance and good resistance to intergranular corrosion.
316L stainless steel is commonly used in heat exchangers for pulp and paper equipment, dyeing equipment, film processing equipment, pipes, materials for exterior use in coastal areas, and bracelets and cases for advanced watches. Equipment for the use of equipment, chemicals, dyes, paper, oxalic acid, fertilizers, etc. in seawater; photo, food industry, coastal facilities, ropes, CD rods, bolts, nuts.
316L stainless steel is commonly used in heat exchangers for pulp and paper equipment, dyeing equipment, film processing equipment, pipes, materials for exterior use in coastal areas, and bracelets and cases for advanced watches. Equipment for the use of equipment, chemicals, dyes, paper, oxalic acid, fertilizers, etc. in seawater; photo, food industry, coastal facilities, ropes, CD rods, bolts, nuts.
50crv4 has good mechanical properties and process properties, high hardenability, adding vanadium to refine the grain of steel, reducing superheat sensitivity, improving strength and toughness, high fatigue strength, and high yield ratio, but Poor weldability and low ductility due to cold deformation. It is a higher-grade spring used as a high-load important spring with a large cross section and a valve spring, piston spring and safety valve spring with an operating temperature
30CrMnSiA is a medium carbon with high strength and poor welding performance. 30CrMnSiA has high strength and sufficient toughness after quenching and tempering, and hardenability is also good. After quenching and tempering, the material can be used as a grinding wheel shaft, gears and sprockets. 30CrMnSiA has good processability, small processing deformation and good fatigue resistance. For shaft and piston parts and so on. Used in automobiles, aircraft, various special wear-resistant parts, etc.
The hardenability, hardening and tempering hardness, wear resistance and strength of Cr12MoV die steel are higher than Cr12. Used in the manufacture of various cold-punching dies and tools with large cross-sections, complex shapes and heavy working conditions, such as punching die, trimming die, piping die, steel plate Cr12Mov thick plate deep drawing die, circular saw, standard tool And gauges, thread rolling molds, etc.
Used as important tempering parts requiring good toughness, high strength, and large size, such as heavy machinery high-load shafts, turbine shafts larger than 250mm, helicopter rotor shafts, turbojet turbine shafts, blades, high Load transmission parts, crankshaft fasteners. Gears, etc.; can also be used to operate rotor shafts and blades with temperatures exceeding 400 °C; it can also be used to make important parts of special performance requirements after nitriding treatment. It can be used after low temperature tempering or after isothermal quenching. Use for strength steel.
It is mainly used for the production of instruments, watch parts, automobiles, machine tools and other various machines with small force and strict requirements on size and finish. It requires strict dimensional accuracy and smoothness, and relatively low mechanical performance. Standard parts such as gears, shafts, bolts, valves, bushings, pins, fittings, spring seat cushions and machine screws, plastic molding dies, surgical and dental surgical instruments.
