Characteristics:
1.Driving by synchronous belt,ensure smooth and accurate running.
2.Inverter driving,stable and power saving.
3.Use electric adjust,easy operate.
4.Automatic continuous feeding,use multiple belt with vibrating motor,(for higher configuration use drilled suction belt),to keep the feeding stable.
5.Automatic counting and kicking,quantity can preset.
6.Conveyer pressure adjustable according to the box to ensure best quality.
4.Machine configuration
Main motor Siemens
PLC Siemens
Inverter VEICHI
Touch screen VEICHI
Feeder belt NITTA JAPAN
Ribbed belt Hutchinson
Bearing NSK JAPAN
Plain belt NITTA Japan
Low voltage apparatus Schneider
Delta servo system For 4&6 corner box Form Taiwan
Glue spray For 4&6 corner box KEQI Brand gluing system
6.Feature
1.Feeder section
Equipped with vibrating motor.
With independent transmission,low noise,with front adjustable wheels,max working capacity can be achieved.
Feeding knives and left and right registers fixing bar are controlled up and down by pneumatic system easily.
Feeding knifes are equipped with pneumatic mechanism for smoother feeding.
Configure the display, real-time monitoring of the paper is normal
2.Paper alignment system
Automatic alignment system to correct the paper feeding,avoid the paper going to sides.
UV destroying device and dust removing device for better gluing effect.
3.Bottom lock section
Configure the spray gun system for automatic spray.
Lock-bottom assembly mechanism with high elastic hookers is of ideal design,fast and easy operation
4.Folding section
Equipped with speed variator for belts,ensure the folded boxes parallel and in good order
Fast,convenient adjustment and operation can fold boxes perfectly
The middle up and down transmission module can fold boxes synchronously or alternately
5.Pressure section
Adjust the pressure with the upper and lower belts.For flute A,B corrugated board,overlapping and jogger devices are equipped to ensure box gluing well.
After kicker is set up,whatever speed the machine runs,the kicker can automatically follow,no need to reset it.
7.Standard Price:
Option:
8.Delivery time: 40 days
9.Payment terms: 1)T/T.30% deposit in advance, and 70% balance
payment before shipment.
10.Our service
1.One year guarantee time.
2.If parts (except wearing parts) are broken within guarantee time (it is not caused by human factor), they will be changed for free.
The client should pay for the cost following:
1.Visa fee
2.Air ticket
3.Diet
4.Accommodation
5.Labor fee:100 USD/day (within guarantee time)
150 USD/day (without guarantee time)
NOTE:ALL OF THE COST SHOULD SEND TO US BEFORE SENDING OUT ENGINEER/PARTS.
Ps:these offers are valid in 1 month.
Show in Drupa Germany
Product Brief
High stabilityï¼?Two output line , high capacity
Fully Automatically , make outside earloop welding togther with mask producing process
which can save labor , once non woven raw material in unwinding part use up , the
machine can automatically
Equipment size 6100*3100*1900 mm
speed 120~160pcs/min
voltage 220v 60Hz
Total power of equipment 8KW
Equipment weight 2050Kg
e machine consists of corrective unwinding institutions, cutting structure, the rolling bodies, transmission and electrical control.
Agencies main configuration and specifications
(A) unwinding institutions
The device has a manual aspect of offset can be eliminated due to the tension of raw material at both ends arising from Bohou or paper core non-circularity different and wrinkled.
Unwinding tension to the high linear magnetic powder brake actuator output torque balancing the tension fluctuation can be reduced to a minimum.
Unwinding specifications: maximum width of700mm, phi diameter 1000mm
Paper tube clamping method: air shaft clamping
Specifications: 3in 1 root of the air shaft 1 piece
A pneumatic gun 1 piece
Tension control: closed-loop tension control.
The output control: 200N.M 1 piece
magnetic brakes 1 piece
Correction perform: tracking the substrate by the photoelectric eye correction controller for a given signal, the motor drive ball screw execution.
Specifications: photoelectric eye 1 piece
Two linear bearings4 piece
A corrective institutions 1 piece
The photoelectric eye fine-tuning 1 sets
(B) cutting machine configuration
The agency uses carbide precision disc disc knife (slitting relatively thick aluminum foil, paper and other materials) or (and) straight knife cutting (slitting general plastic film), neat incision, long life, cutting up and down knife shaft width adjustment processing, between the upper and lower blade shaft gear speed matching. Turning the handwheel implementation under the knife, the knife continues to rotate automatically rely.
Tool axis: under the knife shaft each one
2 locking device: a fast by knife device, able to lock on the knife shaft, to avoid slitting knife from the up and down or move due to quality problems.
Specifications: a rocker arm
A locking shaft
With gear
A worm gear
3. Row waste: by blowing high pressure air feed tube diversion, the scrap material to exclude
Specifications: 1 fan
A duct
4 main wall: steel wall panels, effective shock absorption, enabling machine high-speed and stable operation.
Specifications: 30MM
ange motor
Product Brief
The equipment adopts ultrasonic heating mode, frequency conversion speed regulation,
and produces disposable dust-proof non-woven fabric strip cap of non-woven material and PE plastic film material
from transmission to finished product to complete integrated
production.
Characteristicï¼?Dimensions can be adjusted directly
Machine dimension 3900mm*820mm*1550mm
speed 180~210pcs/min
voltage 220v - 50~60Hz
Total power of equipment 5KW
Equipment weight 850Kg
Product Brief
The plastic steering wheel sleeve manufacturer uses PECPE ultrasonic heating to make
the steering wheel sleeve. The whole machine makes the raw materials easier to
become finished products, and the process is fully automated. This steering wheel
sleeve is often used in 4S automobile shops.
Equipment size 1600*1150*1300mm (L*W*H)
speed 95~150pcs/min
voltage 220v
Total power of equipment 7.5KW
Equipment weight 650Kg
Product Brief
One output line , high capacity
Fully Automatically , make outside earloop welding togther with mask producing process
which can save labor , once non woven raw material in unwinding part use up , the
machine can automatically stop .
Equipment size 4600*3100*1900mm (L*W*H)
speed 60~80pcs/min
voltage 220v
Total power of equipment 6.5KW
Equipment weight 1550Kg
Technical Parameter
Max web width 330mm
Max printing width 320mm
Max unwinding dia 1000mm
Max printing speed
(Production speed depending on process, job etc.) 60m/min
Gear pitch 3.175mm (1/8)
Printing unit(IR drier) 3 units
Printing repeat 56T-112Tï¼?1T=3.175mmï¼?
Air shaft diameter 76mm
Printing plate diameter 1.7mm
Mounting tape 0.38mm
Speed Control By converter
Power Supply 380V/3Phase/50HZ
Control System
Motor 2.2KW, Wannan
Converter Yaskawa, Japan
Unwinding tension controller ZXTEC
Rewinding tension controller ZXTEC
Button switch Schneider
Electric Components CHINT or Schneider
Web guiding ZXTEC
Configuration
Simple mounter 1 pcs
Printing cylinder 1 set (3 pcs)
Ceramic anilox roller 1 set (3 pcs)
Tool box 1 set
Measurement & Weight
Measurement 3200*1160*2150mm
Weight 2600kgs
450 Paper Straws Slitting Machine
Technical Parameter
Max web width 450mm
Max unwinding dia 1000mm
Slitting width 10-18mm(un-adjustable)
18-450mm(adjustable)
Speed 80m/min
Max rewinding dia 450mm
Cutting precision 士0.5mm
Operator 1 person
Speed Control By converter
Power Supply 380V/3Phase/50HZ
Control System
Motor 2.2KW, Lichao
Converter 2.2KW, Schneider
Unwinding tension controller ZXTEC
Rewinding tension controller ZXTEC
Magnetic powder Guangtai
Web guiding sensor HENGWANG
Button switch Schneider
Circular 1 set of 15mm width
1 set of 13.5mm and 14mm
Air cylinder Jingwei
Configuration
Tool box 1 set
Measurement & Weight
Measurement 2850*1280*1320mm
Weight 900kgs
Technical Parameter
Max web width 330mm
Max printing width 320mm
Max unwinding dia 1000mm
Max printing speed
(Production speed depending on process, job etc.) 60m/min
Gear pitch 3.175mm (1/8)
Printing unit(IR drier) 3 units
Printing repeat 56T-112Tï¼?1T=3.175mmï¼?
Air shaft diameter 76mm
Printing plate diameter 1.7mm
Mounting tape 0.38mm
Speed Control By converter
Power Supply 380V/3Phase/50HZ
Control System
Motor 2.2KW, Wannan
Converter Yaskawa, Japan
Unwinding tension controller ZXTEC
Rewinding tension controller ZXTEC
Button switch Schneider
Electric Components CHINT or Schneider
Web guiding ZXTEC
Configuration
Simple mounter 1 pcs
Printing cylinder 1 set (3 pcs)
Ceramic anilox roller 1 set (3 pcs)
Tool box 1 set
Measurement & Weight
Measurement 3200*1160*2150mm
Weight 2600kgs
450 Paper Straws Slitting Machine
Technical Parameter
Max web width 450mm
Max unwinding dia 1000mm
Slitting width 10-18mm(un-adjustable)
18-450mm(adjustable)
Speed 80m/min
Max rewinding dia 450mm
Cutting precision 士0.5mm
Operator 1 person
Speed Control By converter
Power Supply 380V/3Phase/50HZ
Control System
Motor 2.2KW, Lichao
Converter 2.2KW, Schneider
Unwinding tension controller ZXTEC
Rewinding tension controller ZXTEC
Magnetic powder Guangtai
Web guiding sensor HENGWANG
Button switch Schneider
Circular 1 set of 15mm width
1 set of 13.5mm and 14mm
Air cylinder Jingwei
Configuration
Tool box 1 set
Measurement & Weight
Measurement 2850*1280*1320mm
Weight 900kgs
Product Brief
Three output line Max output could reach 160-200pcs/min.
Stable quality and convenient operating.
The Aluminum Mask Making Machine is well designed and orderly.
Suitable for non-woven Material.
Equipment size 9800*3000*1800 mm
speed 160~200pcs/min
voltage 220v - 50~60Hz
Total power of equipment 12.8KW
Equipment weight 2850Kg
Type HZ-260 HZ-350 HZ-450 HZ-800
Film roll width 255mm 350mm 450mm 800mm
Film roll diameter 320mm 320mm 320mm 320mm
Packaged length 65-230mm 60-220mm 60350mm 60--500
Packaged width 30-100mm 30-160mm 30-200mm 30-250mm
Packaged height â?¤45mm â?¤55mm â?¤65mm â?¤100mm
Production capacity 40-230bag/min 30-220bag/min 30-220bag/min 30-150bag/min
Electric supply 220V,60HZ,1Φ 220V,60HZ,1Φ 220V,60HZ,1Φ 220V,60HZ,1Φ
Power 2.4Kw 2.5Kw 2.6Kw 3.0Kw
Machine dimension(mm) 4190*850*1420 4200*850*1520 4200*950*1520 4400*1400*1520
Machine weight 500KG 550KG 680KG 800KG
Application:
Vacuum packing type is a new fashion packaging way at present. Our vacuum sealing machine works from film thermoforming , filling, vacuum pumping,sealing to cutting.
PLC(programmable logic controller) and monitor are from Japan OMRON ,servo driver and original German vacuum pump. Its widely applied to food and medical packaging industry characterized by simple, intuitive and smooth operating experience.
Technical data:
Mode HZ-320
Upper film width(mm) 320
Down film width(mm) 350
Power supply 380 V 50 Hz
Power consumption 13Kw
Cooling water 0.15 M pa
Air supply 0.8 M pa
Capacity 200-400 cycles/h
Weight 2000 Kg
Machine dimension(L*W*H) 4450*700*2050 mm
Features:
1.PLC and monitor are from Japan OMRON,simple,intuitive and smooth operating Experience.
2.Thermoforming molds are made of aluminum alloy with durable and changeable easily with water cooling system available.
3.Servo driver and original German vacuum pump,Schneider electrical parts let machine performance stable and long service life.
4.Machine frame,case are made of 304# steel.
5.Special clamp chain fix the down film,let various thickness film forming well.
6.Waste film edge can be recycled,preventing pollution.
Characteristics:
1.Driving by synchronous belt,ensure smooth and accurate running.
2.Inverter driving,stable and power saving.
3.Use electric adjust,easy operate.
4.Automatic continuous feeding,use multiple belt with vibrating motor,(for higher configuration use drilled suction belt),to keep the feeding stable.
5.Automatic counting and kicking,quantity can preset.
6.Conveyer pressure adjustable according to the box to ensure best quality.
Characteristics:
1.Driving by synchronous belt,ensure smooth and accurate running.
2.Inverter driving,stable and power saving.
3.Use electric adjust,easy operate.
4.Automatic continuous feeding,use multiple belt with vibrating motor,(for higher configuration use drilled suction belt),to keep the feeding stable.
5.Automatic counting and kicking,quantity can preset.
6.Conveyer pressure adjustable according to the box to ensure best quality.
This machine is used to packing drinking straws in three sides sealing bag, printing function is available when using paper as packing material.
Characteristics:
1.Having two colors printing device can be chosen
2.With automatic product counting function, product quantity may pre-set, once the pre-set value is reached. the machine will give an alarm. And the dam-brush will separate each set quantity packaged straw.
3.Printing, feeding, and packing can complete in one processing.
4.Packing straw length is adjustable within a certain range.
Specification
Drink Straw Diameter(mm) 5-12mm
Need change some parts.
Straw Length(mm) Standard: 190-210mm
Extra mould: 170-260mm
By change the sealing and cutting mold, printing cylinder
Packing Model Paper type: wrap paper
Sealing type: 3 side sealing
25-30mmï¼?Paper width: 25-30mm
Production Speed With printingï¼?300pcs/min
Without printingï¼?400pcs/min
Printing Printing Colorï¼?Double Colour
Printing type: flexographic
2.38mm;
Thickness of plate (Including Two-sides Glue Paper): 2.28mm+double-sided adhesive 0.1mm(3M Brand)=2.38mm
Paper Unwinding Frame 1SET
Tension adjustï¼?Mechanical tension device, adjusted by manual
Wrap paper roller core sizeï¼?3inchï¼?4.7inch
Straw feeding hopper Material :Stainless steel frameï¼?
Plexiglass: Adjustable to match straw length
Straw down deviceï¼?induction and swing arm
Feeding modelï¼?by chain feeding
Printing Unit
Single/Double Color
Power transmission ï¼?By chain
Between printing unit: By gear
Traction unitï¼?1sets, rubber roller and chrome plated roller
Printing unitï¼?Ink container, anilox roller, doctor blade, printing cylinder, rubber roller
Dry unitï¼?1SET , by hot air, with temperature
color registerï¼?By manual
Sealing and Cutting Parts Lengthways sealingï¼?Sealing roller-on coupleï¼?pressure adjusted by manual
Horizontalï¼?Sealing roller-on coupleï¼?pressure adjusted by manual, with cutting knife-one couple
Materialï¼?mould steel
Conveyor Belt 1setï¼? Synchronous reduction motor+ controller
Counter dam-brush: one set, lifting by pneumatic cylinder
Controller Counter and buzzersï¼?1setï¼?HUALI Brand
Controlling inverter: 1.1KW Schneider
Temperature controllerï¼?1setï¼?KEQIANG Brand
Low-voltage electric parts: Schneider
Total Power (Kw) 1.5 (220V)
Over size (mm) 1900Ã?1000Ã?1600 (LÃ?WÃ?H)
Weight (Kg) 400
Product Brief
Disposable plastic shoe cover manufacturer, can produce PE and CPE shoe cover, good
quality, low price, high output advantages, can completely replace manual shoe cover,
save labor, reduce costs, can be customized according to customer requirements, this
machine for automation.
Machine dimension 1550mm*1450mm*1500mm
speed 150~190pcs/min
voltage 220v - 50Hz
Total power of equipment 3.5KW
Equipment weight 650Kg
ESecond, the machine main components
The machine consists of corrective unwinding institutions, cutting structure, the rolling bodies, transmission and electrical control.
Agencies main configuration and specifications
(A) unwinding institutions
The device has a manual aspect of offset can be eliminated due to the tension of raw material at both ends arising from Bohou or paper core non-circularity different and wrinkled.
Unwinding tension to the high linear magnetic powder brake actuator output torque balancing the tension fluctuation can be reduced to a minimum.
Unwinding specifications: maximum width of700mm, phi diameter 1000mm
Paper tube clamping method: air shaft clamping
Specifications: 3in 1 root of the air shaft 1 piece
A pneumatic gun 1 piece
Tension control: closed-loop tension control.
The output control: 200N.M 1 piece
magnetic brakes 1 piece
Correction perform: tracking the substrate by the photoelectric eye correction controller for a given signal, the motor drive ball screw execution.
Specifications: photoelectric eye 1 piece
Two linear bearings4 piece
A corrective institutions 1 piece
The photoelectric eye fine-tuning 1 sets
(b) the rolling bodies
The agency uses the left-right axis biaxial winding winding with pressure arm balance internal and external pressure. The transmission uses two independent magnetic particle motor drive uniaxial tension adjustable.
Winding Specifications: width up to 700mm, diameter 600mmï¼?or diameter 420mmï¼?
Paper tube clamping means: air shaft clamp (according to customer material specifications)
Specifications: 3in 2 root of the air shaft
Rewinding pressure: differential pressure pneumatic compression, the pressure can be adjusted by pneumatic pressure regulator
Specifications: Pressure arm 2
Cylinder 2
Tension control: magnetic motor constant torque output
Specifications: motor controller
Winding execution: magnetic motor 2 (specifications 50N.M) Single head swing arm unloadingï¼?Or general dischargeï¼?
(D) transmission mechanism
The inverter is used to control the main motor operation, convenient lifting speed, the speed adjustment the excessive soft, smooth.
Drive mode: General inverter control of AC motor drive
Specification: 7.5KW exchange motor
Supporting inverters (domestic well-known brand, quality assurance)
(E) Major appliances:
Centrally electric control cabinet box, elegant, and easy to operate.
Operation of a cabinet
Comptroller display a realistic real-time linear velocity, Hutchison meters automatic stop function (with deceleration stop function, Hutchison Mickey the error)
Optical correction controller 1
Button, contactors, air switches
Users themselves:
1.50 Hz, 380V three-phase five-wire power supply
2 foundation treatment
Mounting equipment and commissioning of the raw materials, auxiliary
quipment effective width 700MM, mechanical speed 150M/min
