1.The automatic polishing machine is an exclusive polishing system consisting 4 manipulators with of 6 axises rotary; Multiple stations simultaneous operation high flexibility and high product efficiency.
2.The control system adopts PROMAX motion control technology from Italy,stable propeert,high control accracy.
3.Programming method:demonstrator programming ,with protable handed device, contains manually mode to simulate the workmanship polishing and record the track; automatically operating model is available with pre-settled parameters program.
4.Polishing pressure and wear compensation control performance: When the polishing cloth wheel is worn out, the system can detect that the torque becomes smaller and automatically the compensation in all direction
5.Linear speed compensation: When the outer diameter of the cloth wheel is reduced, the system automatically increases the speed and compensation;
6.Program setting of add polishing wax:free setting of wax spraying time and frequency according to the characteristics of product.choice of slid wax or liquid wax
7.Full digital control, Can store 50 programs.Programs can be saved and invoked at any time.
8.CN/EN language display on Touch Panel. to set all parameters for an easy operation;fault codes display and alarm pages for quick troubles shooting and repair.
Features
1.1 Walnut shell grain was used as polishing abrasive,The advantages of clean and pollution-free, high cleaning quality and long service life of abrasive, etc.
1.2 The lifting speed of abrasive barrel can be adjusted according to different products, which can realize the functions of slow rising and fast falling.
1.3 It consists of three workstation,and 2 material tanks,one of the workstation is used foe loading and unloading while the other two workstions are used foe coarse polishing and fine polishing at the same time.
1.4 Each station consists of 32 hangers and each one can clamp 4-6PCS,about 25min can polished 4x32=192PCS(depend on the size of product)
1.5 Can suitable for some complex shape products that the cloth polishing wheel cant polish.
1.6 The fixture can quick loading and unloading, flexible clamping, easy to operate.
1.7 Can polishing different products at the same time.
1.8 No need debug,no need edit program,no need dusting,easy operation.
Features
1.1 Walnut shell grain was used as polishing abrasive,The advantages of clean and pollution-free, high cleaning quality and long service life of abrasive, etc.
1.2 The lifting speed of abrasive barrel can be adjusted according to different products, which can realize the functions of slow rising and fast falling.
1.3 It consists of three workstation,and 2 material tanks,one of the workstation is used foe loading and unloading while the other two workstions are used foe coarse polishing and fine polishing at the same time.
1.4 Each station consists of 32 hangers and each one can clamp 4-6PCS,about 25min can polished 4x32=192PCS(depend on the size of product)
1.5 Can suitable for some complex shape products that the cloth polishing wheel cant polish.
1.6 The fixture can quick loading and unloading, flexible clamping, easy to operate.
1.7 Can polishing different products at the same time.
1.8 No need debug,no need edit program,no need dusting,easy operation.
Please contact us fo
1. Machine Application and Scope of Application
HZ 360-HS core shooting machine is a kind of automatic core shooting machine with the functions of vertical parting, full automatic, down-turning die, conveyor belt to convey sand core and automatic mixed sand lifting. Increased sales by 50% relative to the products on the market.
It is suitable for small and medium-sized work pieces in valve, faucet, hardware, hydraulic and pneumatic industries. It also applied to the hot core sand and coated sand of furan resin series hot box sand and urea-formaldehyde resin series. It is especially suitable for copper and
aluminum casting industry, which can meet the core-making requirements of the core-shooting process with three-component resin, complex core shape and low structural strength.
1. human-machine interface and imported high quality electronic control and pneumatic components to ensure accurate and reliable control and easy operation.
2. there are three modes: manual, single action and automatic.
3. the shooting port is 70 degrees to the sand, away from the high temperature area, so that the perforation is easy to manually clean.
4. The machine is equipped with integral moving mechanism of the base, which can make the base move along the X and Y axes, so that the perforation of the opposite mold into the sand hole more convenient and accurate.
5. The movable die is equipped with the core pulling rack to meet the special requirements of the mold. If you do not use core pulling, close the core pulling switch.
6. The angle of the quicksand in the sand storage bucket reaches 70 degrees and is equipped with a vibrating motor. It is suitable for the use of collapsible core sand with poor fluidity in the copper casting and aluminum industry.
7. With mold adjustment space, it is convenient to assemble different molds and reduce the requirements for the die size.
Please contact us for more specifications with your inquiry today! Our honor to sever you with our best service and highest quality.
Whatsapp:+8613670190553
Wechat:+8613670190553
Email:dzivydeng@163.com
2-Manipulators Automatic LPDC Low Pressure Die Casting Machine
The LPDC5540-S equipment consisting of main components: casting device, induction furnace, receiving car, graphite bath, die cleaning device,crane, two manipulators, hydraulic and drives system, pneumatic system, riser tube heating system and control system etc.
Applications:
The Low Pressure Die casting machine are mainly for brass alloy and zinc alloy metal products, especially on faucets, valve bodies and sanitary fittings and accessories.
Advanages:
1. High quality casting and high-precision repeatability , automated casting with servo motor driving, linear guiding rail system;
2. High capacity ranges 400~450 castings per shift (8hrs);
3.Quick die change flange, 5 mins by munually ;
4. Furnace heating method: gas burner is standard and elctricity for option;
5. Max. die diemension 550*400mm;
6. Whole set machine cooled by cooling water for a efficiency cooling, highly improve inductors service life;
7. Zinc Oxide dust cleaning unit for furnace cleaning;
8. Industrial PC control with Ethernet cables, die casting programs up to 200 saved, recording & tracking furnace temperature;
9 .Cost-efficient production ( reduced melting loss,multiple die,one-man operation,increased yield);
10. Humanization of the work station (ergonomic design of the work station,minimizing of heat,noise and danger of accident)
Technical Parameters:
Code
Item
Model: LPDC5540-S
External Size: L*W*H (mm)6000*6000*3400
Power Rate (KW):180
Operating Voltage (V):380
Qty. of Manipulator (sets)ï¼?2
Max. Die Mould Weight (KG)ï¼?180
Max. Die Mould Dimensions(mm)ï¼?550*400*250
Power of Electric Furnace(KW)ï¼?2*80
Furnace Melting Capacity (kg/hr)ï¼?520
Qty. of Furnace (set)ï¼?1
Qty. of Mould Cleaning Bin (set)ï¼?1
Qty. of Feeder (sets)ï¼?2
Qty. of Grahite Bath (set)ï¼?2
Qty. of Crane (set)ï¼?1
Max. Loading of Crane (KG)ï¼?500
Qty. of Tube (pieces)ï¼?3
Gas Pressure (KG)ï¼?6
Water Pressure(KG)ï¼?3
Max.Temp. of Furnace ()ï¼?1250
Temp.of Cooling Water()ï¼?20±2
Max. Speed of Manipulator35° / Sec.
Max. Clamping Stroke of Mould (mm)370
Angle Range of Mould Soaking (°)ï¼?0~90
Pressure of Thimble (KG)ï¼?540
Stroke of Thimble (mm)ï¼?50
Pressure of Casting (Bar)ï¼?50~1200
Equipment Size:
L*W*H LD5540-Dï¼?6500*6000*3400mm
LD5540-Sï¼?7000*7000*3687mm
Total Weightï¼?13T
Total Powerï¼?125KW180KW
Operating Voltageï¼?380V380V
Please contact us for more specifications with your inquiry today! Our honor to sever you with our best service and highest quality.
Whatsapp:+8613670190553
Wechat:+8613670190553
Email:dzivydeng@163.com
Robot operation faucet sanitary ware ,auto parts metal ,lockset and doorknob,thread processing grinding and polishing machine.The size range of the product can ba polished is 300mm and 3KG.
The equipment consisting of main components:Mechaincal arm M-20iA,belt sander,Feeding machine,Sand belt machine control system,Robot base,fixture ,automatic feed tray and contact wheeland etc.
