Range :15 NB UP TO 1200 NB IN SCH 5S , 10S ,10, 20 , 40S , 40 , STD , 60 , 80S , 80 , XS , 100 , 120 , 140 , 160 & XXS
Form :Seamless / Erw / Welded in Round & Square .
Carbon Steel : ASTM / ASME A 53 GR. A , B
ASTM / ASME 106 GR. A , B ,C .
API 5L GR. B , API 5L X 42 , X 46 , X 52 , X 60 , X 70.
ASTM / ASME A 691 GRA , B ,C
Alloy Steel:
ASTM / ASME A 335 GRP 1 , P 5 , P 9 , P 11 , P 12 , P 22 , P 23 , P 91
ASTM / ASME A 691 GRP1 CR , 1 1/4 CR , 2 1/4 CR , 5 CR , 9CR , 91.
specifications.
The flange is slipped over the pipe and then welded both inside and outside to provide sufficient Strength and prevent leakage. This flange is used in preference to weld necks by many users because of its lower cost and the fact that less accuracy is required when cutting pipe to length.
SLIP-ON FLANGE, SO FORGED FLANGES PRODUCTION RANGE
Size: 1/2? (15 NB) to 48? (1200NB)
Standards: ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
Pressure Ratings: Class 150, Class 300, Class 400, Class 600, Class 900, Class1500, Class 2500 | PN6, PN10, PN16, PN25, PN40, PN64 etc.
Carbon Steel Slip-on Flanges: ASTM A105/A105N, A350 LF1, LF2 CL1/CL2, LF3 CL1/CL2, A694 F42, F46, F48, F50, F52, F56, F60, F65, F70, A516.60, 65, 70 (Spectacle Blind Flange, Spacer Ring/Spade Flange), Steel RST37.2, C22.8
Stainless Steel Slip-on Flanges: ASTM A182 F202, F304/304L/304H, F316/316L, F316H, F316TI, F310, F321, F904L
Alloy Steel Slip-on Flanges: ASTM A182 F1, F5, F9, F11, F22, F91
Special Alloy Slip-on Flanges: Duplex, Super Duplex, Nickel Alloys
Flange Face Type: Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
Coating/Surface Treatment: Anti-rust Paint, Oil Black Paint, Yellow Transparent, Zinc Plated, Cold and Hot Dip Galvanized
Value Added Services: CNC Machining, Customised Flanges
Sizes for Slip On Flanges
All Slip On Flanges are available available in sizes from 1/4” through to any size.
Wall Thickness for Slip On Flanges
Schedule 5s through to Schedule XXS and heavier.
Dimensions
Diameter : 1/2? to 24?
Pressure class : 150#, 300#, 600#, 1500#
Dimensions and Pressure Ratings for Slip On Flanges:
ANSI, MSS- SP-44, BS3293, API 605 150lb through to 2500lb
Flange Facings: Raised Face, Ring Type Joint, Large Tongue & Groove, Small Tongue & Groove
BS4504, PN6, 10, 16, 25, 64
BS10, Table D, E, F, & H
DIN Standards
The operation of the gate valve has got it its name. This valve acts like a gate to stop or allow the flow through itself. The valve is either fully closed or fully opened, thus, it faces least pressure drop. These valves are designed for uses related to liquid and gases flow. Here, the valve is opened by lifting the wedge out of the flow path. They are best suitable for hot tapping and pigging and not for throttling purpose.
The globe valve is called so because of its rounded body shape. They are good for regulating flow in a pipeline and ideal for gases control choices. Suraj Steelmet is a known exporter of quality valves and globe valve is one amongst them. Before starting any process we deeply study various factors that can affect its working quality. We offer best balance of requirements and limitations through our services.
It is also a type of check valve that operates because of the difference between upstream & downstream pressures. When the inlet pressure is high then the disc lifts up and the valve allows the fluid to flow to the outlet side. If the downstream or gravity pressure if higher than inlet pressure the disc gets back to its seat. This way reverse flow is blocked. For the smooth process it is important to have durable working disc and this is what we offer. We examine the raw material to be used in our product’s exporting. This results in durable quality production.
Wafer check valve is another type of check valve that allows only unidirectional flow. The advantage of employing check valves is that they automatically block the reverse flow with the change in pressure difference. Wafer check valves have thin design with the swinging disc as the main component. These valves are made to fit in tight spaces so it is desired to get them accurately designed. We offer cut-to-cut exporting and ensures its proper functioning before releasing the consignment.
Check valves are two port valves i.e. two sides opened. Swing check valve allows unidirectional flow. From one side fluid enters and from other it leaves. These are automatic valves that do not require open and close assistance. As they have single directional functionality, thus, automatically prevents backflow or reverse flow. We at Suraj Steelmet maintain inventory of finished swing check valves at best competitive prices.
Butterfly Valves are compact, lightweight and quick opening valves. These are the metal valves ideal for petrochemical and oil industries. These are the most suitable valves in fire sensitive industries because of their lightweight and fire safe nature. As they are small in size, they fit small dimensional needs where space is limited. We at Suraj Steelmet work along specifications entirely to get the required results.
Multiport design system offer great designing flexibility as they can accommodate various ends. Four seats featuring designs are more balanced than 3 seats ball valve. Installing such multiport designs make a lot of tasks easier like for changing the flow plan you can simply remove the valve handle & reposition the ball. Such one piece design can replace more expensive valves. We add great value to the products through our fine exporting unit. Before providing any piping system solution we determine all aspects.
Flush bottom valves are special purpose valves used for draining the unwanted. They are available in various sizes and materials. The material range is given to suit every type of industrial flushing needs. We have an inventory of standard sized flush bottom valves to fulfil instant demands. For special orders we carry out the exporting as per given specifications.
Range : 15 NB UP TO 1200 NB IN SCH 5S , 10S ,10, 20 , 40S , 40 , STD , 60 , 80S , 80 , XS , 100 , 120 , 140 , 160 & XXS
Form : Seamless / Erw / Welded in Round & Square.
Nickel Alloy : ASTM / ASME SB 163 UNS 2200 ( NICKEL 200 )
ASTM / ASME SB 163 UNS 2201 (NICKEL 201 )
ASTM / ASME SB 163 / 165 UNS 4400 (MONEL 400 )
ASTM / ASME SB 464 UNS 8020 ( ALLOY 20 / 20 CB 3 )
ASTM / ASME SB 704/705 UNS 8825 INCONEL (825)
ASTM / ASME SB 167 / 517 UNS 6600 (INCONEL 600 )
ASTM / ASME SB 167 UNS 6601 ( INCONEL 601 )
ASTM / ASME SB 704 /705 UNS 6625 (INCONEL 625)
ASTM / ASME SB 619/622/626 UNS 10276 ( HASTELLOY C 276 )
Copper Alloy : ASTM / ASME SB 111 UNS NO. C 10100 , 10200 , 10300 , 10800 , 12000,12200, 70600 , 71500 . ASTM / ASME SB 466 UNS NO. C 70600 ( CU -NI- 90/10) , C 71500 ( CU -NI- 70/30)
Sheet and Plates Range :
5 mm to 100 mm thick in upto 2500 mm width & upto 6000 length available with NACE MR 01-75s.
Nickel Alloy :
ASTM / ASME SB 162 UNS 2200 ( NICKEL 200 ) / UNS 2201 (NICKEL 201 )
ASTM / ASME SB 127UNS 4400 (MONEL 400 )
ASTM / ASME SB 424 UNS 8825 (INCONEL 825)
ASTM / ASME SB 168UNS 6600 (INCONEL 600 ) / UNS 6601 ( INCONEL 601 )
ASTM / ASME SB 443 UNS 6625 (INCONEL 625)
ASTM / ASME SB 574 UNS 10276 ( HASTELLOY C 276 )
ASTM / ASME SB 462 UNS 8020 ( ALLOY 20 / 20 CB 3 )
Grades :Hastelloy C-22, Hastelloy C-276, Hastelloy C-2000
Type: Seamless / Erw / Welded/ Fabricated
Standard : Hastelloy Seamless Pipe
Hastelloy ERW Pipe
This range is used in :
Petrochemicals Plants
Oil Refineries
Fertilizers Plants
Sugar Mills
Chemical Plants
Pharmaceuticals
Textile Machinery
Grades : Incoloy 800, incoloy 825, Incoloy 925, Incoloy a-286, Incoloy DS
Type: Seamless / Erw / Welded/ Fabricated
Standard : ASTM B407, ASTM B829, ASTM B514, ASTM B775, ASTM B515, ASTM B751
This range is used in :
Petrochemicals Plants
Oil Refineries
Fertilizers Plants
Sugar Mills
Chemical Plants
Pharmaceuticals
Textile Machinery
We supply a wide range of precisely engineered stainless steel pipes & tubes, made in compliance with international quality and safety standards. Our range comprises of stainless steel welded pipes & tubes. Available in different dimensions & grades, these stainless steel welded tubes and pipes are widely used in different industries like power, engineering, construction and many more. We offer products at highly competitive prices and deliver consignment within stipulated time ..
Stainless & Duplex Steel
Stainless & Duplex Steel pipes and tubesRange: 15 NB UP TO 1200 NB IN SCH 5S , 10S ,10, 20 , 40S , 40 , STD , 60 , 80S , 80 , XS , 100 , 120 , 140 , 160 & XXS.
Form: Seamless / Erw / Welded in Round & Square .
Stainless Steel :
ASTM / ASME SA 312 GR. TP 304 , 304L , 304H, 309S ,309H , 310S, 310H , 316 , 316TI , 316H , 316 LN , 317 , 317L , 321 , 321H , 347 , 347 H , 904L .
ASTM / ASME SA 358 CL 1 & CL 3 GR . 304 , 304L , 304H, 309S ,309H , 310S, 310H , 316 , 316H , 321 , 321H , 347 .
Duplex Steel : ASTM / ASME SA 790 UNS NO S 31803 , S 32205 , S 32550 , S 32750 , S 32760.
Sheet and Plates Grades : Hastelloy C-22, Hastelloy C-276, Hastelloy C-2000
Form:
Hastelloy Sheet
Hastelloy Coil
Hastelloy Strips
Hastelloy Plates
Hastelloy Circle
Hastelloy Ring
Name:45obott-weided Elbow
MATERIAL:A234-WPB.A420-WPL6.A234-WP12.A234-WP11.A234-WP5.A403-WP304.A403-WP304L.A403-WP316.A403-WP316L.
SIZE:1/2"-48"?DN15-DN1200
PRESSURE:Sch5-Sch160?XXS
STANDARDS: ISO. ANSI. JIS. DIN GB/T12459?GB/T13401?ASME B16.9?SH3408
SH3409?HG/T21635?HG/T21631?SY/T0501
USE: Petroleum, chemical, power, gas, metallurgy, shipbuilding, construction, etc.
Name : 90othreaded Elbow
MATERIAL:A234-WPB.A420-WPL6.A234-WP12.A234-WP11.A234-WP5.A403-WP304.A403-WP304L.A403-WP316.A403-WP316L.
SIZE:1/8"-4"?DN6-DN100
PRESSURE GRADE:2000LB?3000LB?6000LB?Sch40?Sch80?Sch160
STANDARDS: ISO, ANSI. JIS. DIN GB/T12459?GB/T13401?ASME B16.9?SH3408 SH3409?HG/T21635?HG/T21631?SY/T05010
Sheet and Plates Grades : Incoloy 800, incoloy 825, Incoloy 925, Incoloy a-286, Incoloy DS
Type: Seamless / Erw / Welded/ Fabricated
Standard : ASTM B407, ASTM B829, ASTM B514, ASTM B775, ASTM B515, ASTM B751
Incoloy Sheets, PlatesThis range is used in :
Petrochemicals Plants
Oil Refineries
Fertilizers Plants
Sugar Mills
Chemical Plants
Pharmaceuticals
Textile Machinery
Sheet and Plates Grades : Monel 400, Monel k500
Type: Seamless / Erw / Welded/ Fabricated
Form: Round, Square, Rectangular, Hydraulic etc.
Length: Single Random, Double Random & Cut Length
End: Plain End, Beveled End, Threaded
The salient features are as follows :
Hot Dipped Galvanizing Epoxy & Fbe Coating Electro Polish Draw & Expansion
Range: 3.17 MM TO 350 MM DIA
Round BarsNickel Alloy
ASTM / ASME SB 160 UNS 2200 ( NICKEL 200 ) / UNS 2201 (NICKEL 201 )
ASTM / ASME SB 164 UNS 4400 (MONEL 400 )
ASTM / ASME SB 425 UNS 8825 (INCONEL 825) ASTM / ASME SB 166 UNS 6600 (INCONEL 600 ) / UNS 6601 ( INCONEL 601 )
ASTM / ASME SB 446UNS 6625 (INCONEL 625)
ASTM / ASME SB 574 UNS 10276 ( HASTELLOY C 276 )
ASTM / ASME SB 472 UNS 8020 ( ALLOY 20 / 20 CB 3 )
Grades : Inconel 600, Inconel 601, Inconel 625, Inconel 625LCF, Inconel 686, Inconel 718, Inconel 800, Inconel 825, Inconel X-750
Sizes : 1mm to 200mm diameter
Type : Bars, Rods, wire
Standard : ASTM, ASME, API, AISI, BS, ANSI, DIN, JIS, MSSP, NACE
Grades : Incoloy 800, incoloy 825, Incoloy 925, Incoloy a-286, Incoloy DS
Standard : ASTM B408, AMS 5766, ISO 9723, ISO 9724, BS 3076NA15, BS 3075NA15, EN 10095, VdTüV 412 & 434
Type :
Round Bar
Bright Bar
Polish Bar
Black Round Bar
Forged Bar
Forged Round Bar
Hex Bar
Forged Hex Bar
Flat Bar
Rod
Grades : Monel 400, Monel k500
Range : 5 mm dia To 500 mm dia in 100 mm TO 6000 mm Length
Standard: ASTM / ASME SB 164
Name:45othreaded Elbow
MATERIAL:A234-WPB.A420-WPL6.A234-WP12.A234-WP11.A234-WP5.A403-WP304.A403-WP304L.A403-WP316.A403-WP316L.
SIZE:1/8"-4"?DN6-DN100
PRESSURE GRADE:2000LB?3000LB?6000LB?Sch40?Sch80?Sch160
STANDARDS: ISO, ANSI. JIS. DIN GB/T12459?GB/T13401?ASME B16.9?SH3408 SH3409?HG/T21635?HG/T21631?SY/T05010
Grades : Grade 1, Grade 2, Grade 3, Grade 4, Grade 5, Grade 7, Grade 9, Grade 23
Type: Seamless / Erw / Welded/ Fabricated
Range : 15 NB UP TO 600 NB IN SCH 5S, 10S, 10, 20, 40S, 40, STD, 60, 80S, 80, XS, 100, 120, 140, 160 etc.
Form Round, square, rectangular, hydraulic etc.
Length Single Random, Double Ranidom & Cut Length
End Plain End, Bevelled End, Treaded
Grades : Inconel 600, Inconel 601, Inconel 625, Inconel 625LCF, Inconel 686, Inconel 718, Inconel 800, Inconel 825, Inconel X-750
Standard : ASTM / ASME SB 168, ASTM / ASME SB 424 , ASTM / ASME SB 443
Name:90obott-weided Elbow
MATERIAL:A234-WPB.A420-WPL6.A234-WP12.A234-WP11.A234-WP5.A403-WP304.A403-WP304L.A403-WP316.A403-WP316L.
SIZE:1/2"-48"?DN15-DN1200
PRESSURE:Sch5-Sch160?XXS
STANDARDS: ISO, ANSI. JIS. DIN GB/T12459?GB/T13401?ASME B16.9?SH3408
SH3409?HG/T21635?HG/T21631?SY/T05010
USE: Petroleum, chemical, power, gas, metallurgy, shipbuilding, construction, etc.
Name:180obott-weided Elbow
MATERIL:A234-WPB.A420-WPL6.A234-WP12.A234-WP11.A234-WP5.A403-WP304.A403-WP304L.A403-WP316.A403-WP316L.
SIZE:1/2"-48"?DN15-DN1200
PRESSURE:Sch5-Sch160?XXS
STANDARDS: ISO. ANSI. JIS. DIN. GB/T12459?GB/T13401?ASME B16.9?SH3408 SH3409?HG/T21635?HG/T21631?SY/T05010
USE: Petroleum, chemical, power, gas, metallurgy, shipbuilding, construction, etc.
Grades : Inconel 600, Inconel 601, Inconel 625, Inconel 625LCF, Inconel 686, Inconel 718, Inconel 800, Inconel 825, Inconel X-750
Type: Seamless / Erw / Welded/ Fabricated
Range: 15 NB up to 600 NB in SCH 5S, 10S, 10, 20, 40S, 40, STD, 60, 80S, 80, XS, 100, 120, 140, 160 & XXS
Form: Round, Square, Rectangular, Hydraulic etc.
Length: Single Random, Double Random & Cut Length
End: Plain End, Beveled End, Threaded
This range is used in :
Petrochemicals Plants
Oil Refineries
Fertilizers Plants
Sugar Mills
Chemical Plants
Pharmaceuticals
Textile Machinery
Grades : Monel 400, Monel k500
Type: Seamless / Erw / Welded/ Fabricated
Form: Round, Square, Rectangular, Hydraulic etc.
Length: Single Random, Double Random & Cut Length
End: Plain End, Beveled End, Threaded
The salient features are as follows :
Hot Dipped Galvanizing
Epoxy & Fbe Coating
Electro Polish
Draw & Expansion
Grades : Hastelloy C-22, Hastelloy C-276, Hastelloy C-2000
Type :
Hastelloy Round Bar
Hastelloy Bright Bar
Hastelloy Polish Bar
Hastelloy Black Round Bar
Hastelloy Forged Bar
Hastelloy Forged Round Bar
Hastelloy Hex Bar
Hastelloy Forged Hex Bar
Hastelloy Flat Bar
Hastelloy Rod
Nitronic 60 Stainless Steel is an austenitic alloy, considered to have the best galling resistance of the entire range of Stainless Steels.
Characteristics of Nitronic 60 include
High pitting resistance
Outstanding corrosion resistance Good high temperature properties for temperatures around 982 degrees Centigrade
Oxidation resistance
Crevice corrosion and chloride pitting resistance is greater than Stainless Steel 316.
Nitronic 60 can be formed using common forming techniques, and pre-heating is not required to weld Nitronic 60. Common welding methods such as gas metal arc, gas tungsten arc and submerged arc can be used to weld Nitronic 60. Hardening Nitronic 60 Stainless Steel calls for the alloy to be cold worked.
Primary Elements:
• Between 16 and 18 percent Chromium
• 8 to 9 percent Nickel
• 7 to 9 percent Manganese
• 3.5 to 4.5 percent Silicon
• Halance being Iron
• Trace amounts of Carbon, Sulfur, Phosphorus and Nitrogen
Industries Served :
• Oil and gas production
• Hydroelectric power
• Petrochemical
• Food processing
• Automotive
• Zarine
• Nharmaceutical
• Construction and chemical sector.
The design of ball valve has a quarter turn spindle, ball and handle. The spindle is connected to the ball inside the valve. Handle lets you see the valve's position i.e. open or close. When the valve is opened the handle is placed along the valve or pipe's direction and when closed it is perpendicular to the valve. The plus point of ball valve is: they are strong and highly durable. They are perfect for shut off applications.
Design Standard: BS S3S I/ API 60/ BS EN ISO 17292
Bore/Port: Full Bore/Reduced Bore
Features: 3 Piece/ 2 Piece/ Single Piece Ball Valve, Trunnion Mounted / Floating Ball
Testing Standard: API 598, ISO 5208
Pressure Rating: 150# to 1500#
Size: 1/2" to 2" Screwed ends/ Socket weld ends ½”to 12" Flanged ends/Butt weld ends
MOC: Carbon Steel/ Stainless Steel or Alloy Steel
Operation: Manual/ Pneumatic/ Electrical
Range :
0.1 mm to 100 mm thick upto 2500 mm width & upto 8000 mm length available with NACE MR 01-75s.
Stainless Steel :
ASTM / ASME SA 240 304 , 304L , 304H, 309S , 309H, 310S , 310H , 316 , 316H , 316L , 316 TI , 317 , 317L , 321 , 321H , 347 , 347 H , 409 , 410 , 410S , 430
Duplex Steel :
ASTM / ASME SA 240 UNS NO. S 31803 , S 32205 , S 32550 , S 32750 , S 32760.
Range: 3.17 MM TO 350 MM DIA
Stainless Steel :
ASTM / ASME SA 276 TP 304 , 304L , 309S , 309H, 310S , 316 , 316L , 316 TI , 317 , 321 , 347 , 410 , 420 , 430 ,431 , 440A ,B & C. , 446 ASTM / ASME SA 479 TP 304 , 304L , 304H, 309S , 309H, 310S , 310H , 316 , 316H , 316L , 316 TI , 317 , 321 , 321H , 347 , 347 H , 410, 430 ,431 & 444.
Duplex Steel :ASTM / ASME SA 276 UNS NO. S 31803 , S 32205 , S 32550 , S 32750 , S 32760
Perforated Sheets
Grades : Grade 1, Grade 2, Grade 3, Grade 4, Grade 5, Grade 7, Grade 9, Grade 23
Range : 15 NB up to 1500 NB in 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS available with NACE MR 01-75
Standard : ASTM, ASME, API, AISI, BS, ANSI, DIN, JIS, MSSP, NACE
Types : Socket Weld, Slip On, Blind, Lapped, Screwed, Weld Neck, Long Weld Neck, Reducing, Spectacle, Ring Joint
Features:
Dimensional accuracy
High strength
Durability
Corrosion resistance
Excellent finish
Specifications : tantalum sheet, tantalum plate, tantalum foil
Grade: RO5200, Ro5400,RO5252,RO5255
Standard :ASTM B708-98
Size:T0.1-10.0mm
We are factory specializing in the manufacture and export Tantalum and Niobium prodcut for more than ten years,Including foil tube ,rod,wire,sheet,plate, ,rod,strip,target and so on We can supply the best quallity and low price. Tantalum sheets, Tantalum- tungsten alloy sheets(Ta2.5W, Ta10W)
Purity : 99.95%min or 99.99%min conformity with ASTM B 708 98
Sheet and Plates Specifications
1)hot and coll rolled, Gr1~Gr23
2)Thickness:0.3mm - 60mm
3)Length:6000mm
4)ASTM B265,ASTM 4911,F67,F136
Material :titanium and titanium alloys
Pure Titanium Grade : GR1, GR2, GR3, GR4
Titanium Alloy Grade : GR5 (6% Al, 4%V)
GR6 (5% AL, 2.5%Sn)
Gr.7 (Titanium + Pd)
Gr.9 (3% Al, 2.5%V)
Gr.10 (11.5%Mo, 6% Zr, 4.5% Sn)
Gr.11 (Titanium + Pd)
Gr.12 (0.3% Mo, 0.8% Ni)
Specifications : Titanium round bar
Grade: Gr1, Gr2, Gr3, Gr5, Gr7
Standard: ASTM B348, ASTM F136, ASTM F67, AMS 4928
Specification:
1. Grade : Gr1, Gr2, Gr4 ,Gr5,Ti-6AL4V ELI,Gr.7, Gr.9, Gr.12
2. Standard : ASTM B348, ASTM F136, ASTM F67, AMS 4928
3. Size: Diameter : 4mm to 350mm, Length: 50mm to 6000mm
4. Payment : T/T or L/C at sight
5. MOQ : 10 kg
6. Package : Ply wooden case or as request
7. Delivery time : 7- 30 days after confirmed
8. Applications: industry, glasses so on.
