Good compatibility with various base oils.
Be used to formulate low-zinc anti-wear hydraulic oil, which has excellent anti-wear, anti-oxidation and excellent anti-emulsification properties, and excellent filtering performance.
The hydraulic oil formulated meets the standard of GB111181.1-2011.
It shows excellent performance in the bench test.
Meet the requirement of SH0564-93.
Good cooling speed and brighten metal surface.
Ideal characteristic temperature and characteristic time can be achieved
Be used to formulate the common quench oil, quick bright quench Oil, quick Quench Oil. Over-speed quench oil can be formulated by adding a special cooling accelerant.
(1)Introduction and Application
DG31654 is kind of high economic performance additive package with the excellent capacity of detergency, dispersibility, anti-oxidant and anti-corrosion, can reduce piston deposits obviously. The engine oil formulated by this product can meet the requirement of API CJ-4 and CI-4.
(2)Dosage Reference
Quality Level Additive Dose (m %)
CJ-4 15
CI-4 13
(3)Quality Index
Item Typical data Test Method
Flash Point (Open), °C 180 GB/T3536
Kinematic Viscosity (100°C), mm2/s Report GB/T265
Ca, % (m/m) 1.5 SH/T0297
P , % (m/m) 0.64 GB/T0296
Zn, % (m/m) 0.72 SH/T0226
N , % (m/m) 0.52 SH/T0224
Sulphated Ash, % (m/m) 6.5 GB/T2433
TBN, mg KOH/g 49 SH/T0251
(4)Storage
According to the requirements of SH/T0164, the maximum temperature should not exceed 75°C for the storage, handling and blending of the product, and it should not exceed 45°C for long-term storage.
For more details of health and safety precautions, please refer to Material Safety Data Sheet.
(5)Packing
Net Weight: 195 Kg/Iron Drum
.
(1)Introduction and Application
DG31654 is kind of high economic performance additive package with the excellent capacity of detergency, dispersibility, anti-oxidant and anti-corrosion, can reduce piston deposits obviously. The engine oil formulated by this product can meet the requirement of API CJ-4 and CI-4.
(2)Dosage Reference
Quality Level Additive Dose (m %)
CJ-4 15
CI-4 13
(3)Quality Index
Item Typical data Test Method
Flash Point (Open), °C 180 GB/T3536
Kinematic Viscosity (100°C), mm2/s Report GB/T265
Ca, % (m/m) 1.5 SH/T0297
P , % (m/m) 0.64 GB/T0296
Zn, % (m/m) 0.72 SH/T0226
N , % (m/m) 0.52 SH/T0224
Sulphated Ash, % (m/m) 6.5 GB/T2433
TBN, mg KOH/g 49 SH/T0251
(4)Storage
According to the requirements of SH/T0164, the maximum temperature should not exceed 75°C for the storage, handling and blending of the product, and it should not exceed 45°C for long-term storage.
For more details of health and safety precautions, please refer to Material Safety Data Sheet.
(5)Packing
Net Weight: 195 Kg/Iron Drum
.
(1)Introduction and Application
The oil modulated by this product has excellent performance of the high temperature cleanness, low temperature dispersity, antioxidation and antiwear.
On the paraffin base oil of Daqing, the oil of grade 10W/30?10W/40 and 15W/40 can be modulated by adding amount of 4.4 or 5.4% of this product can meet the quality requirement of grade API SE/SF.
This product is suitable for engine oil for advanced electric motorcycle of 4-Stroke.
(2)Dosage Reference
Quality Level Additive Dose (m %)
SE 4.4
SF 5.4
(3)Quality Index
Item Quality Index Test Method
Density (20°C), kg/m3 900-1200 GB/T1884
Kinematic Viscosity (100°C), mm2/s Report GB/T265
Ca, %(m/m) 2.50-3.50 SH/T0297
N, %(m/m) 0.50-0.70 SH/T0224
Zn, %(m/m) 1.60-2.00 SH/T0226
TBN, mg KOH/g90.0 GB/T0251
Flash Point (Open), °C170 GB/T3536
(4)Storage
According to the requirements of SH/T0164, the maximum temperature should not exceed 75°C for the storage, handling and blending of the product, and it should not exceed 45°C for long-term storage.
For more details of health and safety precautions, please refer to Material Safety Data Sheet..
(5)Packing
Net Weight: 180Kg/Iron Drum.
(1)Introduction and Application
This product is an additive package for the modulation of high grade oil.
Engine Oil modulated by this product has an excellent cleanness, dispersity and antioxidation anticorrosion antiwear capacity. It can significantly reduce the deposition of carbon and film of the engine piston, and prolong the oil exchange cycle of the engine.
Test data to meet the performance requirements of grade API CI-4/SL in class II/III base oil. The test was carried out in according to the rules of the API base oil exchange.
(2)Dosage Reference
Quality Level Base Oil Type Viscosity Grade Additive Dose (m %)
CI-4/SL A 15W40/10W40/10W30 13.0
CH-4/SL API 15W40/10W40/10W30 11.5
CH-4/SJ API 15W40/10W40/10W30 11.5
CF-4/SL API 15W40/10W40/10W30 7.5
CF-4/SJ API 15W40/10W40/10W30 6.0
(3)Quality Index
Item Quality Index Test Method
Density (20°C), kg/ m3 Report GB/T1884
Flash Point (Open),°C170 GB/T3536
Kinematic Viscosity (100°C), mm2/s100.0 GB/T265
TBN, mg KOH/g70.0 SH/T0251
P , % (m/m0.70 SH/T0296
N , % (m/m0.50 SH/T0224
Zn, % (m/m0.90 SH/T0226
Ca, % (m/m2.30 GB/T0297
(4)Storage
According to the requirements of SH/T0164, the maximum temperature should not exceed 75°C for the storage, handling and blending of the product, and it should not exceed 45°C for long-term storage.
For more details of health and safety precautions, please refer to Material Safety Data Sheet.
(5)Packing
Net Weight: 190 Kg/Iron Drum
High Performance Gasoline Engine Oil Additive Package T30501
(1)Introduction and Application
The gasoline engine oil formulated by this additive can meet the requirements of API SN and ILSAC GF-5, it will reduce the carbon and sludge deposit effectively during running, improve fuel economy and reduce exhaust emissions
(2)Dosage Reference
Quality Level Additive Dose (m %)
ILSAC GF-5/API SM 7.5
ILSAC GF-5/API SN 8.9
(3)Quality Index
Item Quality Index Test Method
Kinematic Viscosity (100°C), mm2/s Report (110) GB/T265
Flash Point (Open) ,°C �175 GB/T3536
Ca, % (m/m) �2.7 SH/T0297
P , % (m/m) �0.89 SH/T0296
Zn, % (m/m) �0.9 SH/T0226
N , % (m/m) �0.9 SH/T0224
TBN, mg KOH/g �93 SH/T0251
(4)Storage
According to the requirements of SH/T0164, the maximum temperature should not exceed 75°C for the storage, handling and blending of the product, and it should not exceed 45°C for long-term storage.
For more details of health and safety precautions, please refer to Material Safety Data Sheet.
(5)Packing
Net Weight: 190Kg/Iron Drum.
Good compatibility with various base oils.
Be used to formulate low-zinc anti-wear hydraulic oil, which has excellent anti-wear, anti-oxidation and excellent anti-emulsification properties, and excellent filtering performance.
The hydraulic oil formulated meets the standard of GB111181.1-2011.
High Performance Gasoline Engine Oil Additive Package T30501
(1)Introduction and Application
The gasoline engine oil formulated by this additive can meet the requirements of API SN and ILSAC GF-5, it will reduce the carbon and sludge deposit effectively during running, improve fuel economy and reduce exhaust emissions
(2)Dosage Reference
Quality Level Additive Dose (m %)
ILSAC GF-5/API SM 7.5
ILSAC GF-5/API SN 8.9
(3)Quality Index
Item Quality Index Test Method
Kinematic Viscosity (100°C), mm2/s Report (110) GB/T265
Flash Point (Open) ,°C �175 GB/T3536
Ca, % (m/m) â?¥2.7 SH/T0297
P , % (m/m) â?¤0.89 SH/T0296
Zn, % (m/m) â?¥0.9 SH/T0226
N , % (m/m) â?¥0.9 SH/T0224
TBN, mg KOH/g â?¥93 SH/T0251
(4)Storage
According to the requirements of SH/T0164, the maximum temperature should not exceed 75°C for the storage, handling and blending of the product, and it should not exceed 45°C for long-term storage.
For more details of health and safety precautions, please refer to Material Safety Data Sheet.
(5)Packing
Net Weight: 190Kg/Iron Drum.
It shows excellent performance in the bench test.
Meet the requirement of SH0564-93.
Good cooling speed and brighten metal surface.
Ideal characteristic temperature and characteristic time can be achieved
Be used to formulate the common quench oil, quick bright quench Oil, quick Quench Oil. Over-speed quench oil can be formulated by adding a special cooling accelerant.
(1)Introduction and Application
The oil modulated by this product has excellent performance of the high temperature cleanness, low temperature dispersity, antioxidation and antiwear.
On the paraffin base oil of Daqing, the oil of grade 10W/30ã??10W/40 and 15W/40 can be modulated by adding amount of 4.4 or 5.4% of this product can meet the quality requirement of grade API SE/SF.
This product is suitable for engine oil for advanced electric motorcycle of 4-Stroke.
(2)Dosage Reference
Quality Level Additive Dose (m %)
SE 4.4
SF 5.4
(3)Quality Index
Item Quality Index Test Method
Density (20°C), kg/m3 900-1200 GB/T1884
Kinematic Viscosity (100°C), mm2/s Report GB/T265
Ca, %(m/m) 2.50-3.50 SH/T0297
N, %(m/m) 0.50-0.70 SH/T0224
Zn, %(m/m) 1.60-2.00 SH/T0226
TBN, mg KOH/g â?¥90.0 GB/T0251
Flash Point (Open), °C �170 GB/T3536
(4)Storage
According to the requirements of SH/T0164, the maximum temperature should not exceed 75°C for the storage, handling and blending of the product, and it should not exceed 45°C for long-term storage.
For more details of health and safety precautions, please refer to Material Safety Data Sheet..
(5)Packing
Net Weight: 180Kg/Iron Drum.
Diesel Engine Oil Additive Package DG31654
(1)Introduction and Application
DG31654 is kind of high economic performance additive package with the excellent capacity of detergency, dispersibility, anti-oxidant and anti-corrosion, can reduce piston deposits obviously. The engine oil formulated by this product can meet the requirement of API CJ-4 and CI-4.
(2)Dosage Reference
Quality Level Additive Dose (m %)
CJ-4 15
CI-4 13
(3)Quality Index
Item Typical data Test Method
Flash Point (Open), °C 180 GB/T3536
Kinematic Viscosity (100°C), mm2/s Report GB/T265
Ca, % (m/m) 1.5 SH/T0297
P , % (m/m) 0.64 GB/T0296
Zn, % (m/m) 0.72 SH/T0226
N , % (m/m) 0.52 SH/T0224
Sulphated Ash, % (m/m) 6.5 GB/T2433
TBN, mg KOH/g 49 SH/T0251
(4)Storage
According to the requirements of SH/T0164, the maximum temperature should not exceed 75°C for the storage, handling and blending of the product, and it should not exceed 45°C for long-term storage.
For more details of health and safety precautions, please refer to Material Safety Data Sheet.
(5)Packing
Net Weight: 195 Kg/Iron Drum
High Performance Gasoline Engine Oil Additive Package T30501
(1)Introduction and Application
Different viscosity gasoline engine oil can be modulated by this product can meet the performance requirements of grade API SN and ILSAC GF-5.
Gasoline engine oil can reduce the production of carbon deposition and oil sludge effectively during the operation of the engine to improve performance of fuel economy and low emission.
(2)Dosage Reference
Quality Level Additive Dose (m %)
ILSAC GF-5/API SM 7.5
ILSAC GF-5/API SN 8.9
(3)Quality Index
Item Typical Data Test Method
Ca, % (m/m) 2.80 SH/T0297
P , % (m/m) 0.85 SH/T0296
Zn, % (m/m) 0.98 SH/T0226
N , % (m/m) 1.0 SH/T0224
Mo, % (m/m) 0.2 SH/T0605-2008
TBN, mg KOH/g 95 SH/T0251
(4)Storage
According to the requirements of SH/T0164, the maximum temperature should not exceed 75°C for the storage, handling and blending of the product, and it should not exceed 45°C for long-term storage.
For more details of health and safety precautions, please refer to Material Safety Data Sheet.
(5)Packing
Net Weight: 190Kg/Iron Drum.
(1)Introduction and Application
This product is an additive package for the modulation of high grade oil.
Engine Oil modulated by this product has an excellent cleanness, dispersity and antioxidation anticorrosion antiwear capacity. It can significantly reduce the deposition of carbon and film of the engine piston, and prolong the oil exchange cycle of the engine.
Test data to meet the performance requirements of grade API CI-4/SL in class II/III base oil. The test was carried out in according to the rules of the API base oil exchange.
(2)Dosage Reference
Quality Level Base Oil Type Viscosity Grade Additive Dose (m %)
CI-4/SL API â?¡/â?¢ 15W40/10W40/10W30 13.0
CH-4/SL API 15W40/10W40/10W30 11.5
CH-4/SJ API 15W40/10W40/10W30 11.5
CF-4/SL API 15W40/10W40/10W30 7.5
CF-4/SJ API 15W40/10W40/10W30 6.0
(3)Quality Index
Item Quality Index Test Method
Density (20°C), kg/ m3 Report GB/T1884
Flash Point (Open),°C �170 GB/T3536
Kinematic Viscosity (100°C), mm2/s �100.0 GB/T265
TBN, mg KOH/g â?¥70.0 SH/T0251
P , % (m/m) â?¥0.70 SH/T0296
N , % (m/m) â?¥0.50 SH/T0224
Zn, % (m/m) â?¥0.90 SH/T0226
Ca, % (m/m) â?¥2.30 GB/T0297
(4)Storage
According to the requirements of SH/T0164, the maximum temperature should not exceed 75°C for the storage, handling and blending of the product, and it should not exceed 45°C for long-term storage.
For more details of health and safety precautions, please refer to Material Safety Data Sheet.
(5)Packing
Net Weight: 190 Kg/Iron Drum
