Description
Aerogel Insulation Felt/Panel is made of nano-silica aerogel as the main material and combined with glass fiber cotton or pre-oxidized fiber mat by special process.It is characterized by low thermal conductivity,certain tensile and compressive strength,and is a new type of thermal insulation material.
Specification
Model SACB-0-3 SACB-0-6 SACB-0-10
Thickness(mm) 3 6 10
Width(mm) 1400/1500(customizable)
Color White
Permitted useful temperature range(�C) -200~650 -200~650 Fiberglass composite: -200~650
Ceramic fiber composite: 600~1000
Density(kg/m�) 200�20 200�20 200�20
Linear expansivity 4.210-6
Dimensional stability(max) 1% Test method GB/T 8811-2008
Compressive property (min),kpa,@10% 60 Test method GB/T 13480-2014
(min),kpa,@25% 120 Test method GB/T 13480-2014
Burning behavior A1 Test method GB/T 20285-2006
The smoke performance level SR-2
Drip content level ST-2
Smoke toxicity of the FED's value,(max) 0.1
Corrosion resistance pass Test method GB/T 3810.1-2006
Hydrophobicity,(%) >99.8 Test method GB/T 10299-2011
Tensile strength(min),(kpa) Fiberglass composite: 100
Ceramic fiber composite: 80 Test method GB/T 17911-2011
Remarks : Silica aerogel fiberglass and ceramic fiber technical parameters
Advantages
--Lower thermal conductivity coefficient
Thermal conductivity coefficient less than 0.016w/(m,k)at room temperature,
several times or even dozens of times lower than traditional heat preservation materials, and with better heat preservation effect.
--Thinnest and lightest thermal insulating material
Under the same heat preservation effect, the dosage of our companys SiO2 aerogel composite material is only 1/5 to 1/3 of traditional materials . So it can be applied to dense pipeline and narrow space and achieve a good effect of heat or cold preservation. And greatly convenient for installation and save the cost of the protective layer.
--Water-proof and moisture-proofeasy to store
It is hydrophobic and porous with hydrophobicity of 99%.
Application
Construction: Interior and extrior wall, door, floor, ceiling, roof, partitions, fireproof door
Cold Storage: fridge, freezer, refrigerators, cold storage, medical incubator, blood bank, medicine box, refrigerated container.
Veicle: Engine heat shield, catalytic exhaust pipe
Aerospace: Engine, black box
Company Name:HUATAO
Contact Person:Frank Zong
Mob/Wechat/Whatsapp:+86 19930618603
Skype:huataogroup
Email:
Frank:export@huataogroup.com,Mob:+86 19930618603
Annie:annie.lu@huataogroup.com,Mob:+86 18032422676
Emma:sale04@huataogroup.com,Mob:+86 13383110252
Julie:team5@huataogroup.com,Mob:+86 17731189774
Lily:team7@huataogroup.com,Mob:+86 18033762592
Rebecca:marketing@huataogroup.com,Mob:+86 18033762592
Website:
www.industrial-felts.com
www.huataolover.com
www.geosynthetic-fabric.com
sjzht.bossgoo.com
Description
HUATAO AEROGEL is extremely hydrophobic and breathable. By keeping the underlying asset drier for longer, HUATAO AEROGEL offers world-class leading CUI (corrosion under insulation) defense.
Specification
Material:Nano Silica Aerogel
Color: White
Density: 180-220kg/m3
Applicable Temperature: -200 ~ +1000
Hydrophobicity: Absolute Hydrophobicity (Below 350)
Thermal Conductivity: 0.012 - 0.018w/mk (At 25)
Low Temperature Bending: 99%
Breaking Elongation: 65%
Bending Strength: 45KP
Compressive Strength: 32N
Transfer Printing Felt
Aluminum Extrusion Felt
Roller Cover
Endless Belts
Felt Pads
aerogel
aerogel blanket
aerogel insulation blanket
aerogel particles and powder
silica aerogel blanket
aerogel insulation
new insulation materials
thermal insulation materials
Aerogel Insulation Blanket
Huatao HT650 Aerogel Blanket
Huatao HT200 Aerogel Blanket
Aerogel Particles and Powders
Aerogel Insulation Blanket with Aluminium Foil
Aerogel Fiberglass Insulation Blanket
Description
The calendered felt is made of Nomex,polyester fiber, or blended fiber, treated through needle punch and then calender proce
Specification
Material Aramid (Nomex),polyester
Thickness 6-12mm
Circumference 2.2m-5m
Working temperature 160°C - 200°C
Packing PP Woven Bags With Water Proofing
Delivery time 5-15 working days upon receipt of payment
Payment Terms T/T
Advantages
1.Even thickness,smooth surface and strong tension,
2.Wide range in weight.
3.Same texture can be produced to your original sample
4.Environmental friendly and harmless to human body
5.Easily cut into different sizes.
6.Has passed ROHS,CA117,BS5852
Application
the calendered felt has very soft surface and compact structure,it is used as christmas toy,matress spring insulator pad, mattress top pad,insustrial felts,shoe material.
Description
HUATAO AEROGEL is engineered to provide optimal thermal performance and value at service temperatures up to 650°C (1200°F). With its extremely low thermal conductivity, HUATAO AEROGEL is up to 75% thinner than competing insulation materials. This makes it ideal for installation in congested areas or near mechanical clashes, increasing both plant safety and efficiency. Reduced insulation thicknesses also supports faster, easier application-saving time and expense.
Specification
Material:Nano Silica Aerogel
Color: White
Density: 180-220kg/m3
Applicable Temperature: -200 ~ +1000
Hydrophobicity: Absolute Hydrophobicity (Below 350)
Thermal Conductivity: 0.012 - 0.018w/mk (At 25)
Low Temperature Bending: 99%
Breaking Elongation: 65%
Bending Strength: 45KP
Compressive Strength: 32N
Transfer Printing Felt
Aluminum Extrusion Felt
Roller Cover
Endless Belts
Felt Pads
aerogel
aerogel blanket
aerogel insulation blanket
aerogel particles and powder
silica aerogel blanket
aerogel insulation
new insulation materials
thermal insulation materials
Aerogel Insulation Blanket
Huatao HT650 Aerogel Blanket
Huatao HT200 Aerogel Blanket
Aerogel Particles and Powders
Aerogel Insulation Blanket with Aluminium Foil
Aerogel Fiberglass Insulation Blanket
Description
HUATAO AEROGEL is made of nano-silica aerogel as the main material and combined with glass fiber cotton or pre-oxidized fiber mat by special process.It is characterized by low thermal conductivity,certain tensile and compressive strength,and is a new type of thermal insulation material.
Specification
Material:Nano Silica Aerogel
Color: White
Density: 180-220kg/m3
Applicable Temperature: -200 ~ +1000
Hydrophobicity: Absolute Hydrophobicity (Below 350)
Thermal Conductivity: 0.012 - 0.018w/mk (At 25)
Low Temperature Bending: 99%
Breaking Elongation: 65%
Bending Strength: 45KP
Compressive Strength: 32N
Transfer Printing Felt
Aluminum Extrusion Felt
Roller Cover
Endless Belts
Felt Pads
aerogel
aerogel blanket
aerogel insulation blanket
aerogel particles and powder
silica aerogel blanket
aerogel insulation
new insulation materials
thermal insulation materials
Aerogel Insulation Blanket
Huatao HT650 Aerogel Blanket
Huatao HT200 Aerogel Blanket
Aerogel Particles and Powders
Aerogel Insulation Blanket with Aluminium Foil
Aerogel Fiberglass Insulation Blanket
Description
HUATAO AEROGEL is a synthetic porous ultralight material derived from a gel, in which the liquid component of the gel has been replaced with a gas. The result is a solid with extremely low density and lowthermal conductivity. Nicknames include frozen smoke, solid smoke, solid air, or blue smoke owing to its translucent nature and the way light scatters in the material. It feels like fragile expanded polystyrene to the touch. Aerogels can be made from a variety of chemical compounds.
Specification
Material:Nano Silica Aerogel
Color: White
Density: 180-220kg/m3
Applicable Temperature: -200 ~ +1000
Hydrophobicity: Absolute Hydrophobicity (Below 350)
Thermal Conductivity: 0.012 - 0.018w/mk (At 25)
Low Temperature Bending: 99%
Breaking Elongation: 65%
Bending Strength: 45KP
Compressive Strength: 32N
Transfer Printing Felt
Aluminum Extrusion Felt
Roller Cover
Endless Belts
Felt Pads
aerogel
aerogel blanket
aerogel insulation blanket
aerogel particles and powder
silica aerogel blanket
aerogel insulation
new insulation materials
thermal insulation materials
Aerogel Insulation Blanket
Huatao HT650 Aerogel Blanket
Huatao HT200 Aerogel Blanket
Aerogel Particles and Powders
Aerogel Insulation Blanket with Aluminium Foil
Aerogel Fiberglass Insulation Blanket
Description
Aerogel Insulation Felt/Panel is made of nano-silica aerogel as the main material and combined with glass fiber cotton or pre-oxidized fiber mat by special process.It is characterized by low thermal conductivity,certain tensile and compressive strength,and is a new type of thermal insulation material.
Specification
Model SACB-0-3 SACB-0-6 SACB-0-10
Thickness(mm) 3 6 10
Width(mm) 1400/1500(customizable)
Color White
Permitted useful temperature range(°C) -200~650 -200~650 Fiberglass composite: -200~650
Ceramic fiber composite: 600~1000
Density(kg/m³) 200±20 200±20 200±20
Linear expansivity 4.2Ã?10-6
Dimensional stability(max) 1% Test method GB/T 8811-2008
Compressive property (min),kpa,@10% 60 Test method GB/T 13480-2014
(min),kpa,@25% 120 Test method GB/T 13480-2014
Burning behavior A1 Test method GB/T 20285-2006
The smoke performance level SR-2
Drip content level ST-2
Smoke toxicity of the FED's value,(max) 0.1
Corrosion resistance pass Test method GB/T 3810.1-2006
Hydrophobicity,(%) >99.8 Test method GB/T 10299-2011
Tensile strength(min),(kpa) Fiberglass composite: 100
Ceramic fiber composite: 80 Test method GB/T 17911-2011
Remarks : Silica aerogel fiberglass and ceramic fiber technical parameters
Advantages
--Lower thermal conductivity coefficient
Thermal conductivity coefficient less than 0.016w/(m,k)at room temperature,
several times or even dozens of times lower than traditional heat preservation materials, and with better heat preservation effect.
--Thinnest and lightest thermal insulating material
Under the same heat preservation effect, the dosage of our companys SiO2 aerogel composite material is only 1/5 to 1/3 of traditional materials . So it can be applied to dense pipeline and narrow space and achieve a good effect of heat or cold preservation. And greatly convenient for installation and save the cost of the protective layer.
--Water-proof and moisture-proofï¼?easy to store
It is hydrophobic and porous with hydrophobicity of 99%.
Application
Construction: Interior and extrior wall, door, floor, ceiling, roof, partitions, fireproof door
Cold Storage: fridge, freezer, refrigerators, cold storage, medical incubator, blood bank, medicine box, refrigerated container.
Veicle: Engine heat shield, catalytic exhaust pipe
Aerospace: Engine, black box
Building materials industry furnace: All types industry kiln, including rotary kiln, shuttle kiln, roasted kiln
Metallurgy: torpedo tank, steel ladle, tundish, coke oven door
Machinery: industrial stove, electric stove, stove door, stove cover
Instrumentation: stove temperature tracker, heat accumulator, data record protection, electric ceramic stove.
Feature
It has the thermal insulation performance and surface hydrophobicity and excellent flame retardant properties.
Para-Aramid Industrial Felt Strip For Aluminum Extrusion
Description
Kevlar Pad Is made of 100% Kevlar fiber acupuncture,the color is yellow, the disintegration temperature is 480-500 â??, mainly used for extrusion of aluminum extrusion line on a moving beam of the cooling bed, with high temperature, wear-resistant, High density, non-delamination, lint-free, non-polluting aluminum profiles.
Specificationï¼?
Material:100%Kevlar
Work Temperature:500°C
Size:Make-to-order
Usage:Aluminum Extrusion Initial Table
Color:Yellow
Hardness:Adding Resin Or Not
Shape:Strip
Technics:Needle Punched
Applicationï¼?
Similar to kevlar conveyor belt,applied to high-temperature region of translation step cooling table
Kevlar Conveyor Belt For Aluminum Extrusion
Description
Seamless Kevlar Felt Conveyor Belt also called 100% kevlar felt belt, kevlar belt, high temperature felt belt, belt for aluminum extrusion. The Kevlar felt belt is suitable for first-class and second-class cooling bed of felt belt type production line. The felts provided by our company have good resistance to hardening and abrasion and the highest temperature resistance reaches 500 ° C (carbonization temperature). The company's rolling Kevlar fiber produced by the United States DuPont. Available in green (Kevlar + carbon) and yellow (100% Kevlar) materials for use on sliding tables in aluminum extrusion press cooling beds. This product features similar to Kevlar conveyor belts and is mainly used in the high temperature areas of translation step cooling beds.
Specification
Color:Yellow
Material:Kevlar + one layer base cloth
Temperature Resistance:500?
Available size:As your demands
Commonly used thickness recommend:8mm
Color:white yellow green brown
Advantage
1 Heat resistant up to 500?
2 No elongation under high tension and heavy load
3 No seam, splice or joints: no breaks due to weak zone,High density structure
4 Smooth and even belt surface: scratch-free extrusions
5 Excellent belt tracking on the cooling table
6 Low heat conductivity and high density with good wear resistance and impact resistance property under heavy conditions
Applied environment
Corrosion resistance, acid resistance, heat resistance, moisture proof, oil resistant, alkali resistant, antistatic and wear resistant, resistant to burn, hardy, slip resistance, flame retardant, resistance to high temperature
Description:
Kevlar endless belts are mainly used in pick-up and the first-stage cooling table. Our Kevlar endless belt is very good in temperature resistance (500?)and anti-abrasion.
Specification:
Material:PU felt+synchronous belt(hot melt bonding)
Temperature Resistance:180?600?
Length:2000mm25000mm
Width:20mm200mm
Total Thickness:6mm 8mm 10mm 12mm
Feature:Strong tension,no deviation,non slip,low noise
Application Area:2500T10000T Extrusion production line
Application:
Mostly suitable for the aluminum profiles with the high quality surface requirement,avoid the loss in second operation's and transit bumps or rub when in roduction.
Company Name:HUATAO
100% Nomex Heat Transfer Endless Belt
Description:
Heat Transfer Printing Belts are produced from 100% Nomex fiber. They are the most important component of the heat transfer printing machines. We can offer the felts with the normal and special size according to customer?s request.
Felt Features: needled felt, smooth surface,elastic, non-off tracking.
Heat Transfer Printing Felts are used on the following machines : Monti, Lemaire, Bater, Stork, Futanet, Gessner etc.
Specification:
Material:100%Nomex
Temperature:220°c ~ 280°c
Colors:White
Density:2800g/m2- 3600g/m2
Function:Belt Conveyor Part
Place Of Origin:China
Delivery Time:Within 15 Days Delivery After Receipt Your Payment
Advantage
1. Selection Of Brand Raw Material,Common Specifications Have Temperature 160-180? And 220-280?.
2. The Felt Belt Contains Heat Shrinkable Fiber Material Inside,The Felt Will Automatically Shrink After Heating,Wrapped Tightly.
3. The Belt Surface Formation,Uniform Density,Good Resistance,Long Work Life.
Application
1. Selection Of Brand Raw Material,Common Specifications Have Temperature 16-180? And 220-280?.
2. The Felt Belt Contains Heat Shrinkable Fiber Material Inside,The Felt Will Automatically Shrink After Heating,Wrapped Tightly.
3. The Belt Surface Formation,Uniform Density,Good Resistance,Long Work Life.
Direction of our felt belt
1. The blanket must be install as the direction of the arrow, fixing both sides of the perimeter
to see if the perimeter is the same.
2. Adjust the machine pressure within 2kg. heat up to 150 ?, idle for 2 hours; heat up to
170?, idle for 2 hours; heat up to 190?, idle 3 hours( important); heat up to 200?,
idle for 2 hours.
3. Then the belt will suitable for your machine, you can adjust the machine pressure in 3--5kg
according to your needed and start to printing.
Para-Aramid Industrial Felt Strip For Aluminum Extrusion
Description
Kevlar Pad Is made of 100% Kevlar fiber acupuncture,the color is yellow, the disintegration temperature is 480-500 ?, mainly used for extrusion of aluminum extrusion line on a moving beam of the cooling bed, with high temperature, wear-resistant, High density, non-delamination, lint-free, non-polluting aluminum profiles.
Specification
Material:100%Kevlar
Work Temperature:500°C
Size:Make-to-order
Usage:Aluminum Extrusion Initial Table
Color:Yellow
Hardness:Adding Resin Or Not
Shape:Strip
Technics:Needle Punched
Application
Similar to kevlar conveyor belt,applied to high-temperature region of translation step cooling table
Company Name:HUATAO
Contact Person:Frank Zong
Mob/Wechat/Whatsapp:+86 19930618603
Skype:huataogroup
Email:
Frank:export@huataogroup.com,Mob:+86 19930618603
Annie:annie.lu@huataogroup.com,Mob:+86 18032422676
Emma:sale04@huataogroup.com,Mob:+86 13383110252
Julie:team5@huataogroup.com,Mob:+86 17731189774
Lily:team7@huataogroup.com,Mob:+86 18033762592
Rebecca:marketing@huataogroup.com,Mob:+86 18033762592
Website:
www.industrial-felts.com
www.huataolover.com
www.geosynthetic-fabric.com
sjzht.bossgoo.com
Nomex Spacer Sleeve Felt For Aging Furnace
Description
Our Felt Spacer Sleeve is made of 100 % Nomex fiber through the acupuncture process,it could be resistant to 280 degrees high temperature. Before put the aluminum profile into the Aging Oven,it should cover with the felt sleeve,and then put them between two layers of aluminum profile, that not only could protect the profile from scratches, but also to maintain good air circulation. Our Felt Spacer Sleeve with high temperature,wear-resistant,incision smooth,uniform thickness, non-fuzz, no line of exposure, no explosion edge, pollution-free aluminum profile.
Specification
Color:Yellow
Technology:Needled punched
Material:Nomex
Material Feature:Heat Resistant
Thickness:6mm,8mm,10mm
Width:20-2000mm
Length:540-13500mm
Continual temperature:150?
Peaking temperature:280?
Usage:aluminum extrusion lines
Advantages
Heat resistance
No fuzziness with uniqure Hot Iron technics
No seam broken with exquisite workmanship
Abrasion resistance with smooth cutting and even surface
Pollution-free to profiles
Application
Product utilize 100% Nomex material acupuncture,used for aging furnace,preventing the aluminum profile from being damaged.
Aging Furnace: used as covering for the spacer bars placed between two layers of profiles in the aging furnace so as to keep the profiles from scratches and also maintain good ventilation
Used to protect aluminum from being scraped and keep the aluminum maintain good ventilation
Company Name:HUATAO
Contact Person:Frank Zong
Mob/Wechat/Whatsapp:+86 19930618603
Skype:huataogroup
Email:
Frank:export@huataogroup.com,Mob:+86 19930618603
Annie:annie.lu@huataogroup.com,Mob:+86 18032422676
Emma:sale04@huataogroup.com,Mob:+86 13383110252
Julie:team5@huataogroup.com,Mob:+86 17731189774
Lily:team7@huataogroup.com,Mob:+86 18033762592
Rebecca:marketing@huataogroup.com,Mob:+86 18033762592
Website:
www.industrial-felts.com
www.huataolover.com
www.geosynthetic-fabric.com
sjzht.bossgoo.com
Description
Textile machine needle calender felts are used in calender machine for dye precess and aims to make the cloths soft and smooth than before, used in after processing stage of textile.
our endless calender felt could proess in high temperature , fabric come out soft and smooth.
Specificatoin
Composition: 100%Nomex Heat-resistance: 210-260
Composition: 50%Nomex(on working surface) + 50%Polyester Heat-resistance: 160-210
Composition: 100%Polyester Heat-resistance: 120-160
Density: 2200g/m2-3600g/m2
Thickness: 5mm-10mm
Width: 1600mm-3600mm
Advantages
1.Even thickness,smooth surface and strong tension,
2.Wide range in weight.
3.Same texture can be produced to your original sample
4.Environmental friendly and harmless to human body
5.Easily cut into different sizes.
6.Has passed ROHS,CA117,BS5852
Description
Sanforizing machines are used in shrinkage bottom wait and denim finishing plants. Manufactured by our special heat-resistant Nomex, Polyester and Wool, we can produce the felts for different models of sanforizing machines.
Speocification
Material: Nomex, Polyester, Wool
Density: 2000g/m2-4000g/m2
Thickness: 6mm-10mm
Application:
Needle felt for sanforizing are used on the following machines : Monforts, Morrison, Muzzi, Sperotto Rimar, Bisio, Cibitex, Mather & Platt, Farmer & Norton, Monti, Tepa, Swastik, Dhall, Swastik, Thakore, Yamuna, Ronson, I Kuang, Poong Kwang, etc.
Dscription
Aerogel Inaulation Blanket is one of our hot sale products.It has chosen the acupuncture fiber as substrate, and then the aerogel is compounded into the substrate. It has the thermal insulation performance and surface hydrophobicity and excellent flame retardant properties. The thermal conductivity at room temperature in 0.016 (W/m.K), is lower than the static air; The aerogel product is of high hydrophobicity; at room temperature, the water repellent rate of can be up to 99%; Excellent flame retardant performance, and fire rating has met the national A1 standard. And the temperature of the product using range is wide, Joda Aerogel fiberglass blanker could be used according to the different requirements in -200 ~ 650 DEG C for adiabatic pipe and tank, using the furnace of industrial equipment and pipeline.
Specification
Material:Nano Silica Aerogel
Color: White
Density: 180-220kg/m3
Applicable Temperature: -200 ~ +1000
Hydrophobicity: Absolute Hydrophobicity (Below 350)
Thermal Conductivity: 0.012 - 0.018w/mk (At 25)
Low Temperature Bending: 99%
Breaking Elongation: 65%
Bending Strength: 45KP
Compressive Strength: 32N
Advantages
Optimized thermal conductivity in high temperature service
Faster application, especially on large-bore piping and vessels
Addresses tight, hard-to-insulate spaces with outstanding thermal efficiency
Flexible blanket material won't crack, sag, or settle in high-temperature service
Stands up to vibration, footfalls, and tool strikes
Tough enough for reuse after removal and inspection
Hydrophobic and breathable, Aerogel resists liquid water and avoids the damaging effects of wet insulation
Versatile format can be fitted to any piece of piping or equipment, greatly simplifying material management
Higher packing density reduces shipping and storage costs by up to 90%
Company Name:HUATAO
Contact Person:Frank Zong
Mob/Wechat/Whatsapp:+86 19930618603
Skype:huataogroup
Email:
Frank:export@huataogroup.com,Mob:+86 19930618603
Annie:annie.lu@huataogroup.com,Mob:+86 18032422676
Emma:sale04@huataogroup.com,Mob:+86 13383110252
Julie:team5@huataogroup.com,Mob:+86 17731189774
Lily:team7@huataogroup.com,Mob:+86 18033762592
Rebecca:marketing@huataogroup.com,Mob:+86 18033762592
Website:
www.industrial-felts.com
www.huataolover.com
www.geosynthetic-fabric.com
sjzht.bossgoo.com
Description
Textile machine needle calender felts are used in calender machine for dye precess and aims to make the cloths soft and smooth than before, used in after processing stage of textile.
our endless calender felt could proess in high temperature , fabric come out soft and smooth.
Specificatoin
Composition: 100%Nomex Heat-resistance: 210-260
Composition: 50%Nomex(on working surface) + 50%Polyester Heat-resistance: 160-210
Composition: 100%Polyester Heat-resistance: 120-160
Density: 2200g/m2-3600g/m2
Thickness: 5mm-10mm
Width: 1600mm-3600mm
Advantages
1.Even thickness,smooth surface and strong tension,
2.Wide range in weight.
3.Same texture can be produced to your original sample
4.Environmental friendly and harmless to human body
5.Easily cut into different sizes.
6.Has passed ROHS,CA117,BS5852
Company Name:HUATAO
Contact Person:Frank Zong
Mob/Wechat/Whatsapp:+86 19930618603
Skype:huataogroup
Email:
Frank:export@huataogroup.com,Mob:+86 19930618603
Annie:annie.lu@huataogroup.com,Mob:+86 18032422676
Emma:sale04@huataogroup.com,Mob:+86 13383110252
Julie:team5@huataogroup.com,Mob:+86 17731189774
Lily:team7@huataogroup.com,Mob:+86 18033762592
Rebecca:marketing@huataogroup.com,Mob:+86 18033762592
Website:
www.industrial-felts.com
www.huataolover.com
www.geosynthetic-fabric.com
sjzht.bossgoo.com
Description
Sanforizing machines are used in shrinkage bottom wait and denim finishing plants. Manufactured by our special heat-resistant Nomex, Polyester and Wool, we can produce the felts for different models of sanforizing machines.
Speocification
Material: Nomex, Polyester, Wool
Density: 2000g/m2-4000g/m2
Thickness: 6mm-10mm
Application:
Needle felt for sanforizing are used on the following machines : Monforts, Morrison, Muzzi, Sperotto Rimar, Bisio, Cibitex, Mather & Platt, Farmer & Norton, Monti, Tepa, Swastik, Dhall, Swastik, Thakore, Yamuna, Ronson, I Kuang, Poong Kwang, etc.
Company Name:HUATAO
Contact Person:Frank Zong
Mob/Wechat/Whatsapp:+86 19930618603
Skype:huataogroup
Email:
Frank:export@huataogroup.com,Mob:+86 19930618603
Annie:annie.lu@huataogroup.com,Mob:+86 18032422676
Emma:sale04@huataogroup.com,Mob:+86 13383110252
Julie:team5@huataogroup.com,Mob:+86 17731189774
Lily:team7@huataogroup.com,Mob:+86 18033762592
Rebecca:marketing@huataogroup.com,Mob:+86 18033762592
Website:
www.industrial-felts.com
www.huataolover.com
www.geosynthetic-fabric.com
sjzht.bossgoo.com
Nomex Spacer Sleeve Felt For Aging Furnace
Descriptionï¼?
Our Felt Spacer Sleeve is made of 100 % Nomex fiber through the acupuncture process,it could be resistant to 280 degrees high temperature. Before put the aluminum profile into the Aging Oven,it should cover with the felt sleeve,and then put them between two layers of aluminum profile, that not only could protect the profile from scratches, but also to maintain good air circulation. Our Felt Spacer Sleeve with high temperature,wear-resistant,incision smooth,uniform thickness, non-fuzz, no line of exposure, no explosion edge, pollution-free aluminum profile.
Specification
Color:Yellow
Technology:Needled punched
Material:Nomex
Material Feature:Heat Resistant
Thickness:6mm,8mm,10mm
Width:20-2000mm
Length:540-13500mm
Continual temperature:150â??
Peaking temperature:280â??
Usage:aluminum extrusion lines
Advantagesï¼?
Heat resistance
No fuzziness with uniqure Hot Iron technics
No seam broken with exquisite workmanship
Abrasion resistance with smooth cutting and even surface
Pollution-free to profiles
Application
Product utilize 100% Nomex material acupuncture,used for aging furnace,preventing the aluminum profile from being damaged.
Aging Furnace: used as covering for the spacer bars placed between two layers of profiles in the aging furnace so as to keep the profiles from scratches and also maintain good ventilation
Used to protect aluminum from being scraped and keep the aluminum maintain good ventilation
100% Nomex Heat Transfer Endless Belt
Description:
Heat Transfer Printing Belts are produced from 100% Nomex fiber. They are the most important component of the heat transfer printing machines. We can offer the felts with the normal and special size according to customerâ??s request.
Felt Features: needled felt, smooth surface,elastic, non-off tracking.
Heat Transfer Printing Felts are used on the following machines : Monti, Lemaire, Bater, Stork, Futanet, Gessner etc.
Specification:
Material:100%Nomex
Temperature:220°c ~ 280°c
Colors:White
Density:2800g/m2- 3600g/m2
Function:Belt Conveyor Part
Place Of Origin:China
Delivery Time:Within 15 Days Delivery After Receipt Your Payment
Advantage
1. Selection Of Brand Raw Material,Common Specifications Have Temperature 160-180â?? And 220-280â??.
2. The Felt Belt Contains Heat Shrinkable Fiber Material Inside,The Felt Will Automatically Shrink After Heating,Wrapped Tightly.
3. The Belt Surface Formation,Uniform Density,Good Resistance,Long Work Life.
Application
1. Selection Of Brand Raw Material,Common Specifications Have Temperature 16-180â?? And 220-280â??.
2. The Felt Belt Contains Heat Shrinkable Fiber Material Inside,The Felt Will Automatically Shrink After Heating,Wrapped Tightly.
3. The Belt Surface Formation,Uniform Density,Good Resistance,Long Work Life.
Direction of our felt belt
1. The blanket must be install as the direction of the arrow, fixing both sides of the perimeter
to see if the perimeter is the same.
2. Adjust the machine pressure within 2kg. heat up to 150 â??, idle for 2 hours; heat up to
170â??, idle for 2 hours; heat up to 190â??, idle 3 hours( important); heat up to 200â??,
idle for 2 hours.
3. Then the belt will suitable for your machine, you can adjust the machine pressure in 3--5kg
according to your needed and start to printing.
Nomex Spacer Sleeve Felt For Aging Furnace
Description
Our Felt Spacer Sleeve is made of 100 % Nomex fiber through the acupuncture process,it could be resistant to 280 degrees high temperature. Before put the aluminum profile into the Aging Oven,it should cover with the felt sleeve,and then put them between two layers of aluminum profile, that not only could protect the profile from scratches, but also to maintain good air circulation. Our Felt Spacer Sleeve with high temperature,wear-resistant,incision smooth,uniform thickness, non-fuzz, no line of exposure, no explosion edge, pollution-free aluminum profile.
Specification
Color:Yellow
Technology:Needled punched
Material:Nomex
Material Feature:Heat Resistant
Thickness:6mm,8mm,10mm
Width:20-2000mm
Length:540-13500mm
Continual temperature:150?
Peaking temperature:280?
Usage:aluminum extrusion lines
Advantages
Heat resistance
No fuzziness with uniqure Hot Iron technics
No seam broken with exquisite workmanship
Abrasion resistance with smooth cutting and even surface
Pollution-free to profiles
Application
Product utilize 100% Nomex material acupuncture,used for aging furnace,preventing the aluminum profile from being damaged.
Aging Furnace: used as covering for the spacer bars placed between two layers of profiles in the aging furnace so as to keep the profiles from scratches and also maintain good ventilation
Used to protect aluminum from being scraped and keep the aluminum maintain good ventilation
Transfer Printing Felt
Aluminum Extrusion Felt
Roller Cover
Endless Belts
Felt Pads
aerogel
aerogel blanket
aerogel insulation blanket
aerogel particles and powder
silica aerogel blanket
aerogel insulation
new insulation materials
thermal insulation materials
Aerogel Insulation Blanket
Huatao HT650 Aerogel Blanket
Huatao HT200 Aerogel Blanket
Aerogel Particles and Powders
Aerogel Insulation Blanket with Aluminium Foil
Aerogel Fiberglass Insulation Blanket
Company Name:HUATAO
Contact Person:Frank Zong
Mob/Wechat/Whatsapp:+86 19930618603
Email:export@huataogroup.com
Website:
www.aerogel-blanket.com
www.industrial-felts.com
Description
The blanket belt adopts the imported high-temperature-resistant aramid fabric,and the medium substrate can be divided into two kinds,namely polyester dry net and Kevlar substrate.
2.The use temperature can reach less than 250.At the end of usage,the convergence
shrinkage is 2% and the extending rate is 3%.
3.It is the transferring printing blanket belt special for all kinds of textile fabrics,curtain cloth and decoration cloth.
4.This blanket also named as Thermal Transfer Printing Felt, Heat Resistance Roller Sleeve,High Temperature Seamless Blankets.This blanket is the most important component of heat transfer printing machines.
5.The specifications of all the products above can be customized according to the needs of the clients.
Specification
Materialimported high-temperature-resistant aramid fabric
Temperature:200�c ~ 260�c
Colors:light yellow
Density:8000g/m2
Function:belt conveyor part
Application
Calendering Felts For Compacting Machines are used on the following machines : Ferraro, Monti Muzzi, Sautex, Sperotto, Poongkwang, Monfortl, Lafer etc.
Transfer Printing Felt
Aluminum Extrusion Felt
Roller Cover
Endless Belts
Felt Pads
aerogel
aerogel blanket
aerogel insulation blanket
aerogel particles and powder
silica aerogel blanket
aerogel insulation
new insulation materials
thermal insulation materials
Aerogel Insulation Blanket
Huatao HT650 Aerogel Blanket
Huatao HT200 Aerogel Blanket
Aerogel Particles and Powders
Aerogel Insulation Blanket with Aluminium Foil
Aerogel Fiberglass Insulation Blanket
Company Name:HUATAO
Contact Person:Frank Zong
Mob/Wechat/Whatsapp:+86 19930618603
Email:export@huataogroup.com
Website:
www.aerogel-blanket.com
www.industrial-felts.com
High Temperature Kevlar Felt Roller Tube
The temperature of the profile will lower down to 450ºC when it is transferred about 10 meters to the run-out table,and at this stage the best material is Kevlar.High density is the key factor for good abrasion resistance ,morover,resin treatment is available on request for better abrasion resistance and longer service life.
High temp.resistance felt roller. Suitable for use after fly cut and run out tab1e.(High Temp Zone).Kevlar rollers are capable of withstanding operating temperatures of up to 480Ë? C /. High strength and superior abrasion resistance make this a preferred product for many extrusion conveying tables.
HUATAO seamless felt roller series is specially developed for the customers who have a high requirment for surface.
Advantages of HUATAO roller:It resists to rasing,unevenness,scaling,aluminum pollution and other defects.With smooth surface,the product adopts advanced new technology and is more surable and cost-effective.It is especially suitable for the production of high-quality aluminum products with electrophoretic or polished surface.
Specification:
Materialï¼?100% Kevlarï¼?Kevlar+Carbon Fiber
Colorï¼?Yellow,Green
Temperature Resistance:480 degree
Available Size�(inside diameter,mm) Φ18 Φ23,25 Φ49,50,51 Φ60,62,63 Φ76,77 Φ80,81,82 Φ90,95 Φ100,101,102 Φ114,115 Φ120
Thicknessï¼?mmï¼?ï¼?6---12
Application
1.Applied to aluminum profile extrusion cooling table walking beams.the max temperature resistance 500â??
2.This kind of Kevlar felt cover is main used for the felt type cooling table(First and Second stage) in the Aluminum Extrusion Industry
3.Commonly used for the Initial Table and the forepart of Run-out Table of the aluminium extrusion lines.
Advantage
1. Easy to install, everyone can operate
2. Small weight, convenient storage
3. The blanket has no joint as a whole and there is no break zone
4. The surface is soft and flat, will not scratch the profile
5. Temperature resistance 500°C
Dscription
Aerogel Inaulation Blanket is one of our hot sale products.It has chosen the acupuncture fiber as substrate, and then the aerogel is compounded into the substrate. It has the thermal insulation performance and surface hydrophobicity and excellent flame retardant properties. The thermal conductivity at room temperature in 0.016 (W/m.K), is lower than the static air; The aerogel product is of high hydrophobicity; at room temperature, the water repellent rate of can be up to 99%; Excellent flame retardant performance, and fire rating has met the national A1 standard. And the temperature of the product using range is wide, Joda Aerogel fiberglass blanker could be used according to the different requirements in -200 ~ 650 DEG C for adiabatic pipe and tank, using the furnace of industrial equipment and pipeline.
Specification
Material:Nano Silica Aerogel
Color: White
Density: 180-220kg/m3
Applicable Temperature: -200 ~ +1000
Hydrophobicity: Absolute Hydrophobicity (Below 350)
Thermal Conductivity: 0.012 - 0.018w/mk (At 25)
Low Temperature Bending: 99%
Breaking Elongation: 65%
Bending Strength: 45KP
Compressive Strength: 32N
Advantages
Optimized thermal conductivity in high temperature service
Faster application, especially on large-bore piping and vessels
Addresses tight, hard-to-insulate spaces with outstanding thermal efficiency
Flexible blanket material won't crack, sag, or settle in high-temperature service
Stands up to vibration, footfalls, and tool strikes
Tough enough for reuse after removal and inspection
Hydrophobic and breathable, Aerogel resists liquid water and avoids the damaging effects of wet insulation
Versatile format can be fitted to any piece of piping or equipment, greatly simplifying material management
Higher packing density reduces shipping and storage costs by up to 90%
Application
Construction: Interior and extrior wall, door, floor, ceiling, roof, partitions, fireproof door
Cold Storage: fridge, freezer, refrigerators, cold storage, medical incubator, blood bank, medicine box, refrigerated container.
Veicle: Engine heat shield, catalytic exhaust pipe
Aerospace: Engine, black box
Building materials industry furnace: All types industry kiln, including rotary kiln, shuttle kiln, roasted kiln
Metallurgy: torpedo tank, steel ladle, tundish, coke oven door
Machinery: industrial stove, electric stove, stove door, stove cover
Instrumentation: stove temperature tracker, heat accumulator, data record protection, electric ceramic stove.
Feature
It has the thermal insulation performance and surface hydrophobicity and excellent flame retardant properties.
Description
The blanket belt adopts the imported high-temperature-resistant aramid fabric,and the medium substrate can be divided into two kinds,namely polyester dry net and Kevlar substrate.
2.The use temperature can reach less than 250.At the end of usage,the convergence
shrinkage is 2% and the extending rate is 3%.
3.It is the transferring printing blanket belt special for all kinds of textile fabrics,curtain cloth and decoration cloth.
4.This blanket also named as Thermal Transfer Printing Felt, Heat Resistance Roller Sleeve,High Temperature Seamless Blankets.This blanket is the most important component of heat transfer printing machines.
5.The specifications of all the products above can be customized according to the needs of the clients.
Specification
Materialï¼?imported high-temperature-resistant aramid fabric
Temperature:200°c ~ 260°c
Colors:light yellow
Density:8000g/m2
Function:belt conveyor part
Application
Calendering Felts For Compacting Machines are used on the following machines : Ferraro, Monti Muzzi, Sautex, Sperotto, Poongkwang, Monfortl, Lafer etc.
Description
Sanforizing machines are used in shrinkage bottom wait and denim finishing plants. Manufactured by our special heat-resistant Nomex, Polyester and Wool, we can produce the felts for different models of sanforizing machines.
Speocification
Material: Nomex, Polyester, Wool
Density: 2000g/m2-4000g/m2
Thickness: 6mm-10mm
Application:
Needle felt for sanforizing are used on the following machines : Monforts, Morrison, Muzzi, Sperotto Rimar, Bisio, Cibitex, Mather & Platt, Farmer & Norton, Monti, Tepa, Swastik, Dhall, Swastik, Thakore, Yamuna, Ronson, I Kuang, Poong Kwang, etc.
Transfer Printing Felt
Aluminum Extrusion Felt
Roller Cover
Endless Belts
Felt Pads
aerogel
aerogel blanket
aerogel insulation blanket
aerogel particles and powder
silica aerogel blanket
aerogel insulation
new insulation materials
thermal insulation materials
Aerogel Insulation Blanket
Huatao HT650 Aerogel Blanket
Huatao HT200 Aerogel Blanket
Aerogel Particles and Powders
Aerogel Insulation Blanket with Aluminium Foil
Aerogel Fiberglass Insulation Blanket
Company Name:HUATAO
Contact Person:Frank Zong
Mob/Wechat/Whatsapp:+86 19930618603
Email:export@huataogroup.com
Website:
www.aerogel-blanket.com
www.industrial-felts.com
