Introduction:
Android system for tablet PC, mobile phone and smart TV optional.
Portable 5 pieces of cameras for measurment workable in outdoor.
Shatter-resistant 8" target exchangeable for each wheel
WIFI communication among cameras, tablet PC, mobile phone, TV monitor, keyboard and mouse.
Voice prompt and improper operation display.
Suitable for passenger car, bus and truck with less than 6 meters long of wheel base.
Data update based on update APP.
Standard Accessary:
4 pieces of targets, 4 pieces of 24clamps,32LCD monitor with Android system, turntable, 2 pieces of wedge, steering wheel lock, foot brake depresser, wireless keyboard and mouse.
Optional Accessary:
Tablet PC, WiFi wireless printer.
Technical Data
Measuring Item Accuracy Measuring Range
Toe ±0.01°or ±0.01 mm ±20°
Camber ±0.01° ±30°
Caster ±0.02° ±30°
Set Back ±0.01° ±20°
Thruste Angle ±0.01° ±20°
Wheel Track 1200-3000
Wheel Base 2000-5000
The DR605 Digital Refractometer is easy-to-use battery-powered instrument, ideal for Windshield Cleaner, Ethylene Glycol and Propylene Glycol Antifreeze Fluid, Battery Fluid and Urea (NH2)2CO measurements on the automotive industry. The instrument automatically compensate for sample temperatures as measured at the prism surface.
DR605 is fast, convenient, and easy to use. Simply place a drop or two of fluid in the well and press a button on the keypad. The custom-designed microprocessor delivers a nearly instantaneous readout in refractive index, degrees Brix, or any one of a thousand different units of measure, allowing you to read directly in the units you desire. Nonlinear temperature compensation is automatic and insures that fluids read between 0 and 50 °C (+32 to 122 °F) are measured accurately.
The large dual-line LCD display is easily read, even in dim light, and removes the subjectivity associated with interpreting where a boundary line crosses tiny scale divisions. And, it is so easy to use! The user interface consists of three buttons, read to take readings, cal to make calibration, and scale to step through various unit options.
Rugged Ergonomic-Design
The DR605 fits like a glove in the palm of your hand. The weight of its evenly-balanced design can be held easily in any size hand, even during extended periods of use. The positive response buttons on the keypad provide tactile feedback to the operator when pressed.
A strong plastic enclosure is sealed to guard against liquid and dust penetration, while an integrated prism cover helps prevent sample evaporation and protects the sapphire measuring surface from possible damage. The cover also shields the optics from the influence of strong ambient light, making the DR605 ideal for use indoors or in direct sunlight.
An Outstanding Value
Calibration is automatic and does not require the use of special calibration solutions, or tools. The DR605 refractometer automatically calibrates itself to water and is ready to use in seconds. No more screws to turn and nothing to adjust.
Because the DR605 offers great performance and accuracy at a very affordable price, there is no need to make trade-offs between accuracy and affordability. The DR605 provides high-end performance and precision at a low price; making the DR605 one of the best values available.
Calibration: calibrate with 20°C distilled water in 20°C ambient temperature.
Do not extract the oil. The test results are accurate.
Product details
Introduction:
This tester is designed to not-destructively measure thisckness of non-magnetic coatings (including paint, enamel, plastic,epoxy, etc.) on iron, steel and aluminum.
General Specifications:
Conversion of public and imperial units
Automatic calibration
Compact and easy to carry
Power-saving, auto power off
Data-hold mode
Ergonomic Design
Ergonomic design, Easy to use
"UNIT" Button
Press the "UNIT" button to select dsired unit: mm or mil
mil: A unit of length equal to one thousandth of an inch; used to specify thickness(e.g., of sheets or wire)
mm: A metric unit of length equal to one thousandth of a meter
Low Battery Indicator
When the indicator appears on the display, the button cell is low and must be replaced immediately.
"TEST" Button
1. Press the "TEST" button to turn on the tester. Press and hold down this button for about 1 second to turn off the tester.
2. Press this "TEST" button to delete the reading on the display, will show"--".
PROBE
Measuring probe of the tester. Before measurement, place the tester with its probe firmly and in a right angle against the surface to be tested.
EM2271,SPECIFICATION
Measuring Range 0.0 mm to 2.0 mm, 0 mil to 80 mil
Accuracy 2% rdg ±0.1 mm, or 2% rdg ± 4 mil
Resolution 0.1 mm/1 mil
Power Supply 3V button cell, CR2032 or equivalent, Ã?1pc
Size 69Ã?38Ã?20mm
Weight About 23g (including button cell)
Product details
INTRODUCTION
This tester is a multifunctional vehicle circuit tester with a monolithic processor and a liquid crystal display. It can be used to measure DC voltage, continuity, and the amount of current in fuse. Because the tester uses a new method to measure current, it is unnecessary to remove the fuse; just connect the two probes to the two terminals of this fuse. It can measure a DC voltage as low as 0.1mV.
Connect the test lead, according to the size of the fuse to be tested and the rated current mark on this fuse, determine the type of this fuse and its rated current, or use USER DEFINE mode to measure the current of a fuse. Connect the test leads to the two terminals of the fuse to be tested (for blade fuses, connect the test leads to the two contacts on the top of fuse). The primary display indicates the amount off the current in the fuse under test.
FEATURES
Overrange indication: "OL" shown on the primary display
Open Test Loop Indication
Negative Polarity Indication
Low Battery Indication
SPECIFICATION
Display: 4-digit LCD, with a max. reading of 9999
Battery: 9V battery, 6F22 or equivalent, 1 piece
IP Degree: IP20
Size: 143Ã?84Ã?36mm
Weigh: about 177g (including battery)
DC Voltage: 0.0~50.0V
Continuity: 40Ω
Fuse Current: 0.1~99.9A (USER DEFINE mode)
0.1~50A (Other mode)
Fuse type/Rated current
Maxi Fuse (MAX): 5/7.5/10/15/20/25/30A
Standard Fuse (STD): 5/7.5/10/15/20/25/30A
Mini Fuse (MIN): 30/40/50A
Product details
INSTRUCTION
This instrument is an ideal tool for measuring tire pressure and tire veins depth. It has the advantages of light weight and compact structure. It is very easy to use. You can use it to measure a vehicle's tire pressure and the tire veins depth for safe driving.
FEATURES
2 IN 1, Measuring Tire Pressure and Tire Veins Depth
DIGITAL LCD display with backlight easy to read
Ergonomic design for comfortable hand fit
SPECIFICATIONS
Pressure Measurement Range: 3.0 ~ 99.5 PSI
Pressure Measurement Accuracy: ±1/.5 PSI
Pressure Measurement Resolution: 0.5 PSI
Units: PSI, BAR,kPa, kg/cm2
Auto Power Off: about 85 seconds later
Power Source: 1.5V (LR44)Ã?2 pcs
Dimensions(WÃ?LÃ?T): 50Ã?135Ã?32 mm
Weight: 60g (with battery)
