Parameters of the steel rebar cage welding machine
Note: as your requested size, we can commission the machine you need.
Item No
FH1500-12
( Pile diameter 1.5M)
Cage pile diameter
600 ~ 1500mm
Max cage length
13.5m
Spiral wire diameter
5.0 ~ 16..0mm
Longitudinal bar diameter
12.0 ~ 32.0mm
Spiral pitch
50 ~ 500mm
Mobile disc moving speed
1100mm/min
Rotary speed
4r/min
Hydraulic system pressure
10Mpa
Maximum installed Power supply
13Kw 380V/50Hz/3Phase
Working temperature
-20°~ 50�??
Overall dimension
28m(L) �? 5m(W) �?2m(H)
Welding method
CO2 arc welding
(free)
Welding materials
Welding wire, welding rod (free)
Technical Parameter of the automatic twin head rebar bending machine factory
Model
FHB2-32
Overall Size
12000*2155*1690(L*W*H)
Working Voltage
380V
Installed Power
15.5KW(working power 5KW),50-60Hz
Bender moving speed
0.1-0.5m/s
Bending Speed
30°-48°/S(5-8r/min)
Overall Weight
4.5tons
Min Length scope of the stirrup side
70mm
Max bending angle
Upward bending 0-200°
Downward bending 0-120°
Bi-directional bending (up or down bend)
Φ10mm-Φ28mm
Unidirectional bending (upward bending)
Φ28mm-Φ32mm
Min. Space between stirrup side
¢10 560mm ¢32 620mm
Max bending length
10.5m
Feeding speed of storage convey table
0.6m/s
Load capacity of storage convey table
3T
Working Temperature
-10�??�??+50�??
Processing ability
Bar diameter
( mm)
Φ10
Φ12
Φ14
Φ16
Φ18
Φ20
Φ22
Φ25
Φ28
Φ32
Bars Quantity (pcs)
7
6
5
4
3
3
2
1
1
1
Note: as your requested size, we can commission the machine you need
Features
1.Adopting hydraulic shearing, small volume, high cutting force and high output, low noise, long service life and stable operation, etc.
2.Adopting import seal to the hydraulic cylinder, it is greatly increased service life.
Technical Parameter
(Note: as your reqested size, we can customize for you.)
NO
Model
FHS-32
1
Rebar Diameter range
12-40mm
2
Max cut power
120Kn
3
Effective shearing width
250mm
4
Shear frequency
20times/min
5
Rebar convey speed
1.92m/s
6
Shear length
1-12m
7
Shear error
±2mm
8
Min Manual shear size
10mm
9
Min auto shear size
700mm
10
Min auto convey size
1000mm
11
Rebar stock bin
4pcs
12
Processing capability
40mm 1 bar--12mm 15 bar
13
Total power
25.5KW
14
Work temperature
-10-50�??
15
Weight
9000 kg
16
Working voltage
380V
17
Working air pressure
0.7MPa
18
Hydraulic system max pressure
31.5Mpa
29
Overall dimension
28m(L)
Principle of the machine structure: The steel bending and bending hoop mainly consists of four parts: the transmission mechanism, the frame, the bending and bending hoop fixture and the electrical control. During operation, the motor drives the gear via the V-belt and the pulley, and then the gear rotates the working disk.
Advantages of the Mini type bar bender
(1 ) 11 teeth on one axis, high strength
(2)High-frequency heat treatment of spline shaft, using high-strength gears to increase service life
(3)Separation of spindle and work disk. It is more convenient to disassemble and maintain.
(4)Spindle bearing a
dopts double seal (seal bearing and upper shaft seat plus seal) to prevent iron oxide enter the bearing during work.
(5)Configure foot switch and manual button for easier operation
(6)Spindle with high frequency heat treatment, high toughness
(7)Sturdy skid type baffle plate, effectively reducing the bending load of the motor.
(8)Pressure clutch is adopted, and clutch return is more accurate.
(9)The main shaft gear adopts semi-circular teeth to ensure that there is no winding phenomenon when the steel bar is bent.
(10)The bending process is simple, the work efficiency is high, the bending is neat, and the bending angle can be arbitrarily adjusted.
Technical Parameter
Model
FHGW-26
Long-term bending ability
round bar 4--26mm
3 grade 4--25mm
bending speed
32R/Min(90°)
28R/Min(135°)
voltage
380V
motor model
3Kw-4P
Machine dimension
850x550x870
weight
190Kg
operate method
CNC/full automatic/manual
Note: as your requested size, we can commission the machine you need.
CNC deformed steel bar sawing and threading line
According to the connection of reinforced bar, the machine is combined with international advanced technology, and it is our own R&D with the collection of electric, hydraulic and pneumatic automatic technology, which has the lead at home to reach the international advanced level. It can saw rebar with diameter 16-50mm, HRB335,HRB400,HRB500, with high efficiency, sized automatically, save raw material, easy operation.
The material storage rack is equipped with tonnage capacity, can be cooperated with transport unit to save time, feeding roller avoid a second removal. The transport unit is V style, which is more wear-resisting and reduces noise and long-life. Threading machine is equipped clamped automatically, reduce diameter and thread fully automatically.
Sawing efficiency:10 hours a day sawing about 800~1000 pieces thread head and 400~500 bars.
CNC deformed steel bar sawing and threading machine
CNC deformed steel bar sawing and threading machine
Technical Parameter
(Note: as your reqested size, we can customize for you.)
Model
FHST-40
Sawing Width(mm)
450
Rebar Diameter range(mm)
Φ16~Φ40
Convey speed(m/min)
90
Rebar length range(m)
3.0~12
Size error(mm)
±2mm/m
Sawing Host
Feeding speed
Continuously viable
Clamping mode
Hydraulic
Main motor power(KW)
4
Oil pump power(KW)
1.1
Cooling pump power(W)
60
Total power(KW)
~34.5
Overall Dimensions(L*W*H)(mm)
27000*7000*2000
Related
