Good compatibilityaccurate mechanical dimensionshigh reliability and stabilityzirconia or phosphor bronze sleevesingle mode, multi-mode versionsvarious types of connectors fc, sc, st, mu, lc, mtrj, mpolow splicing loss2.Applicationtelecommunication networktesting equipmentlocal area network(lan)catvengineering recoveryftthconnect different types of ceramic ferrule borescommon adaptersconnector typeceramic ferrule bore end facesingle mode/multi-moderemarkfcpc/upc/apcsm/mmround, square, split square, rectangularscpc/upc/apcsm/mmstpc/upcsm/mmlc, mupc/upcsm/mmdoublemtrjpc/upcsm/mmcommon adaptersconnector typeceramic ferrule bore end facesingle mode/multi-moderemarkfc-scpc/upc/apcsm/mmfc-stpc/upc/apcsm/mmfc-lcpc/upcsm/mmsc-stpc/upcsm/mmsc-lcpc/upcsm/mmfc-mupc/upcsm/mm
1.Exquisite design with precise dimensions and craftsmanship;2.Easy installation;3.Optional locks for side panels;4.Closable top/bottom cable entry openings;5.Advanced production equipment;6.Any customized production is accepted7.Safe packing to avoid damaging8.Firm, durable, artistic, devisable,reasonable price and easy installation9.19 inch network data 27u server rack cabinetNetwork cabinet1.18U-42U available2.Nice appearance with generaous design3.Cold rolled plate4.800kg load capacity5.Supplied cabinet nusts and bolt fixings for devices6.Black/Silver7.Toughened glass front door is simple8.Lockable rear door9.Power distrubition unit for network cabinet
Feature: 1. Width: 600mm, 800mm, 1000mm2. Depth: 600mm - 1200mm3. Capacity: 4U, 6U, 9U, 12U, 15U, 18U, 22U, 27U, 32U, 37U, 42U, 45U, 47U, 52U4. Door type: dual open vented doors, vented/perforated door, steel door, 5mm tempered glass door, all with locks5. Removable side panels with lock optional6. Cable entry on top and bottom, brush cable entry available7. 2 fans on top for 600mm depth server cabinet, 4 fans for 800-1200mm depth cabinet8. 4 feet and 4 castors ( braked castors optional)9. 20-50sets cage nuts10. Flat package11. 2 vertical cable managements for 800mm width server cabinet
-
IDC Connector Conductor:RJ45 8P8CMaterial: contact pin: Phosphor bronze gold-platedCored Line:4 Pairs/ 5 PairsJacket:ABS ,Advanced polycarbonate materialColor:WhiteApplication:Fit for installing into patch panel and all kinds of wall face platesLarge cafes, senior villas, government projects and companies cabling
he pigtail with one active optical adapter while the patch cord with two active connectors. There are many different interfaces which require different adapters.They all with low insertion loss and back reflection loss.Production under FC (short for Ferrule connector), with a metal sleeve to strengthen its external side, the fastening mean is turnbuckle. The advantage for FC connector is easy function, operation and manufacture. Mainly used on patch panels. SC the structure of pin and plastic housing is same with FC, the fastening mean is plug-in latch, no need to revolve. The advantage for ST connector is low cost, easy operation with small insertion lost and high compressive strength.ST With fastening mean is plug-in type ,the core of ST is outside while the core of SC is inside. For connection of 10Base-F is usually with ST but for 100Base-FX is usually with SC.LC With RJ module function for easy operation, the size is a half of SC type. MT-RJ Its latch-up structure is same with RJ-45 type Lan connectors. In order to connect to the optical transceiver facilitate, the end face is desired as double core optical fiber. Fast Ethernet,Data Communication LAN and WANHigh speed Enterprise serversMultiplexers,switches and routersOptical Access and ATM Networks EquipmentOptical Transport and Telecommunications,FTTH,FTTD,FTTXSwitching Equipment
Comply with ANSI/EIA RS-310-D\IEC60297-2\DIN41494; PART1\DIN41494; PART7 Feature: Exquisite design with precise dimension and craftsmanship; Toughened glass door with net hole, vented front door border and steel rear door; Adjustable feet and heavy duty castors are available simultaneously; Cable entry on the top cover and bottom panel with adjustable sizes; Optional installation of plinth to enable cabinets fixation, under-base cable entry/ventilation; Efficient and reliable cabinet connection by baying kit; Removable side panels to ease maintain; Around 1/3 assembled original volume when flat pack. Material: SPCC cold rolled steel; Thickness: Mounting profile 2.0mm, mounting angle 1.0mm, others 1.2mm Surface finish: Degreasing, pickling, phosphoric, powder coated Loading capacity: Static loading: 800KG
1.1PORT FACE PLATE2.COLOR: WHITE3.SIZE: 86*86mm4.WITH COMPUTER AND TELEPHONE ICON5.WITH SCREWS6.MATERIAL: ABS7.AVAILABLE FOR ACCOMMODATION OF CAT6A/CAT6/CAT5E/CAT3 AND UTP/FTP KEYSTONE JACK8.SUITABLE FOR STANDARD 86*86mm STYLE WALL BASE BOX9.ROHS AND REACH COMPLIANT
-
MaterialABS & Zinc plated carbon steelColorWhiteWeight0.054kg
2. Test shields in 1394 and USB cables3. Ergonomic portable handheld design4. Tests installed wires and patch cables5. Remote unit stores in Main unit6. 600 ft test distance (RJ-45/RJ-11/BNC)7. Simple one button test8. Convenient battery access9. Built in battery access10. LEDs indicate connections and faults
-
Feature.Factory-installed fiber stub No epoxy or polishing required Quick and easy fiber termination in the fieldEliminates cable excess length and pigtail splice storage Cost effective Application.Patch panels Distribution frames Maintenance or emergency restoration of fiber networks FTTH OutletsConnection at the desk for LAN environments Applicable for 3.1x2.0mm drop cable or 3.0/2.0/0.9mm cable Optical fiber diameter 125um (657A& 657B) Tight buffer diameter 250um Fiber mode Single mode Operation time About 10s (exclude fiber cut) Insert loss 0.3dB (1310nm & 1550nm) Return loss 45dB Fastening strength of naked fiber 5N Tight clamping force cladding 8N Tensile strength 50N Using temperature -45C~+80
Electrical:Voltage rating: 125V AC rmsCurrent rating: 1.5AmpContact resistance: 100m Ohms (maximum)Insulation resistance: 1,000M Ohms (minimum) at 500V DCDielectric strength: 750V AC rms, 60Hz and one minute Environment:RCA Keystone Wallplate Insert(Gold plated)Storage temperature: -40 to +85°COperating temperature: 0 to 70°CConform to TIA/EIA 568B category 5eMates with modular plug conforming to UTP Cat.6Mechanical:Housing material: PC UL94V-0Inner material: flame-retardant ABS UL94V-0PCB material: FR-4Thickness: 1.6mmContact material: phosphor bronze stamp and PIN T=0.35mmIDC contact material: phosphor bronze, T=0.50mm with nickel platingWire: 24 to 26AWG
1).Planar lightwave circuit (PLC) splitter is a type of optical power management device that is fabricated using silica optical waveguide technology.2).It features small size, high reliability, wide operating wavelength range and good channel-to-channel uniformity, and is widely used in PON networks to realize optical signal power splitting.3).We provides whole series of 1xN and 2xN splitter products that are tailored for specific applications.4).All products meet GR-1209-CORE and GR-1221-CORE requirements.Parameters121418116132164Operating Wavelength (nm)1260~1650Fiber TypeSMF-28e or customer specifiedInsertion Loss (dB)(S/P Grade)4.0/3.87.3/7.010.5/10.213.7/13.516.9/16.521.0/20.5Loss Uniformity (dB)0.40.60.81.21.52.5Return Loss (dB) (S/P Grade)50/5550/5550/5550/5550/5550/55Polarization Dependent Loss(dB)0.20.20.30.30.30.4Directivity (dB)555555555555Wavelength Dependent Loss(dB)0.30.30.30.50.50.5Temperature Stability(-40~85 °C)(dB)0.50.50.50.50.50.5Operating Temperature (°C)-40~85Storage Temperature (°C)-40~85Packaging Dimension (mm) (LWH)4044404440444044507460124Notes:1.Specified without connectors. 2.Add an additional 0.2dB loss per connector
Connector AMPO Female (pinless)Connector BMPO Female (pinless)Fibre ModeOM3 50/125mWavelength850/1300nmPolish TypeUPC to UPCMini Bend Radius30mmInsertion Loss0.35dB Max(0.15dB Typ.)Return Loss?¥20dBJacket OD3.0mmCable JacketLSZHInstallation Tensile Load100 NLong-Term Tensile Load50 NStorage Temperature-40°C to +85°COperating Temperature-10°C to +70°C
Meet TIA/EIA-568-A and TIA/EIA-568-B Category 5E requirements.Meet TIA/EIA TSB-40Meet ISO/IEC Generic Cabling Standard 11801Meet CENELEC Generic Cabling Standard EN50173Angle: 180 DegreeTermination: 110, KRONE,DUALTypes (3 types)Electrical:According to UL 1863Current rating: 1.5 Amp Max.Voltage rating: 150 VoltsContact resistance: 20 m-ohmInsulation Resistance: 500M-ohmDielectric Withstand Voltage: 1000 V AC RMS, 60Hz 1minMaterials:Housing: PC UL94V-0IDC: PC UL94V-0, Accept 22-26 AWG Solid Wire.PCB: FR4 1.6mm(0.04") thickness, 2 layersContact: PC Ul94V-0, 0.45mm(0.018") Diameter Phosphor bronze with 3 u" to 50 u" Gold plating on contact area.RJ45 ethernet cable cat5e cat6 patch panel 1. 19'' fiber patch panel 2.Height: 1U-3U ,Capacity: 12-48 3.Depth:300mm Width: 465mm 12port 24port 48port patch panel descriptions:1. Top quality steel with cover by electrostatic painted, ensures the strong body and pleasing appearance;2. For standard 19" racks use (other rack width options available on request);3. Height: depends on capacity, one Integrated Splice & Distribution 4. Fully stable patch panel, no risk of movement;5. Protected patch panel offers secure environment for adapters, patch cords and pigtails;RJ45 cat5e cat 6 12port 24port 48port patch panel
Brand:WLKColumn spacing:465mm (19 inch)No:WLK-WM-6615Material:SPCC cold rolled steelSize:600mm*600mm*15UFunction:Can install server equipment,the router,patch panel,KVM,UPS,Network device,etc.IOS test:Pass ISO9001:2008 Qualtiy SystemThickness:Mounting Profile: 1.5mm,others: 1.2/1.0mmSurface treatment:Degreasing,pickling,phosphating,power coating,etc.Configuration:Cage nuts and M6 screws: 10 sets.Standard:Comply with ANSI/EIA RS-310-D,IEC297-2,DIN41491;PARTI,DIN41494;PART7,GB/T3047.2-92 standard; compatible with ETSI standard.Device Installation:It is recommended to install network equipment/server device within 350 mm depth.
1. Width: 600mm, 800mm, 1000mm2. Depth: 600mm - 1200mm3. Capacity: 4U, 6U, 9U, 12U, 15U, 18U, 22U, 27U, 32U, 37U, 42U, 45U, 47U, 52U4. Door type: dual open vented doors, vented/perforated door, steel door, 5mm tempered glass door, all with locks5. Removable side panels with lock optional6. Cable entry on top and bottom, brush cable entry available7. 2 fans on top for 600mm depth server cabinet, 4 fans for 800-1200mm depth cabinet8. 4 feet and 4 castors ( braked castors optional)9. 20-50sets cage nuts10. Flat package11. 2 vertical cable managements for 800mm width server cabinet Standard: Comply with ANS/EIA RS-310-D,IEC297-2,DIN4149,PART1,DIN41491,PART7,GB/T3047.2-92Standard; Material:SPCC cold rolled steelThickness: mounting profile: 2.0mm, others:1.2mm Loading Capacity:static loading:800kg
Product Name 10 Pair STB telecom distribution box terminal box Size 320*210*75 mm Packing 50 pcs/CTN . 541 CTNS/20' FCL. IP ground IP65 Suitable STB Module Color White or customized The terminal block of connection adapts for connecting the distributive wires of external and internal padding. Its construction provides the possibility of conducting the control measurements of the connected chains before both directions. Box provides protection from the environmental effects. The terminal block of connection consists of housing and cover of rectangular form, and also 5- polar unit of connection, fixed on the housing. Cover is fixed beyond the axis common with the housing; however, it can be isolated from the housing for guaranteeing the convenience in the work due to the squeezed conditions. The introduction of wires is accomplished through the detachable stuffing boxes, which ensure the possibility of applying the wires of different sizes. Fastening wires is accomplished by the metallic screws, located inside the unit of connection.
-
;Singlesection,compatiblewith 19"standard equipment;Tempered glass front door with over 180 turning degree;Removable side panel,easy to install and maintain(lock optional);Cable entry on the top cover and bottom panel with knock-out plate;L-shaped mounting profile,easy to adjustable on the mounting rail;Fan cutout on the top cover ,easy to install fan;Swing back with over 90 turning degree;Various accessories for optional;Standard:Comply with ANS/EIA RS-310-D,IEC297-2,DIN4149,PART1,DIN41491,PART7,GB/T3047.2-92Standard;Material:SPCC cold rolled steelThickness:1.2mmLoading Capacity:static loading:60kgDegree of protection:IP20
-
FTTH fiber optic terminal box is mainly used in FTTH project of residential block , which provides ahighly density wall-mounting solution of optical distribution.It can be used for the splicing of drop cable ,fiber and patch cable .Environment:1. Tempreture: -40602. Ambient Humidity : 95% above 403. Air pressure: 62kPa105kPa. Feature:1. Industry standard user interface, be made of high impact plastic, PC material2. Can accommodate 1x8 & 1x16 PLC splitter3. Anti-UV, Ultra violet resistant and rainfall resistant4. Up to 16 FTTH drops5. Wall and pole mountable6. 2 inlet ports, 16 outlet ports Application1. Widely used in FTTH access network2. Telecommunication Networks3. CATV Networks4. Data communications networks5. Local Area Networks(LANs)
Dimension : 121x39x16mmSpecifications. Network Punch Down Impact Tool . A blade helps to easily remove the blocks from back mount frames . Computer tools. Network Punch Down Impact Tool . A blade helps to easily remove the blocks from back mount frames. Network Punch Down Impact Tool. Package include: 1 x Cat5 RJ11 RJ45 Network Punch Down Impact Tool.
Network cable 8PPC RJ45Terminal TypeTelephone line, network cable crystal headOEMYesWeight0.93kgLength190cmFeatures1. There are three functions: Stripping, threading and crimping.2. Tool head with all-metal production, long service life;3. Handle for the special material, non-slip, the use of comfort, feel strong, in line with human design;4. Save time and effort to improve the role of crimping efficiency, individuals can easily complete the pressure line.5. Blade of good quality, to ensure that the cut out of the port formation, no burr, the distance between the two metal blades moderate, can easily stripped twisted pair of rubber, but not easy to cut off the network cable.6. The thickness of the line segment and the crystal head anastomosis, not prone to dislocation, can better make twisted pair and crystal head between the solid connection.
