The main characteristics is a superior wear resistance: Severe wear on the surface has a work-hardening effect on the austenitic structure of this steel. This, when combined with the level of carbon in accordance with the international standards, leads to an increase in hardness from 200BHN (in as delivered plates) up to an in-service hardness of at least 600BHN.
Typical Applications:
· Quarries and Constructions: Earth moving crusher jaw, grizzly, screen, stone chutes, chain guide and shredder plates, shovel buckets.
· Mines: Bucket blade of loader, chain conveyor parts, sprocket wheel, various armouring elements.
· Iron Industry, Foundry: Guiding and shifting plates, scraps container, liner of shot blasting unit, pedestal liner, flanged bolster cup, wear liner.
· Concrete and Brickworks: Core and dividing wall of parpen mould, grinding mill scraper, mixer paddle.
· Scraps â?? Recoveries: Wheel disk, striker and hammer mill.
· Automotive Industries: Shot blasting equipment.
It is also used for its low coefficient of friction in metal-to-metal applications, its non-magnetic properties in electrical transformer assemblies and for industrial lifting magnets.
A high manganese, fully austenitic, quench annealed, non magnetic, work-hardening steel with an exceptionally high level of wear resistance when subjected to work-hardening by shock or high impact pressure in service.
The main characteristics is a superior wear resistance:
Severe wear on the surface has a work-hardening effect on the austenitic structure of this steel.
This, when combined with the level of carbon in accordance with the international standards, leads to an increase in hardness from 200BHN (in as delivered plate) up to an in-service hardness of at least 600BHN.
This work-hardening capability renews itself through out in-service life.The underlayers not work-hardened maintain an excellent resistance to shock and a very high ductility.
JG-KSB BLASTER is safe, high productivity and long life wear and tear parts as compare to others. The portable abrasive blaster is works on 'Direct Pressure System' resulting in very high cleaning rate and more economical system by Manual blasting, It's manufactured as per IS-2825 and hydraulically tested for 250 psi. The machine is supplied with long life tungsten carbide lined nozzle, anti-static blast 1hose, alloy steel wear and tear parts, with/without remote control for on /off and remote control versions are denoted with suffix "R", Remote control system is complete pneumatic control, when handle is activated blasting begins and when the handle is released the system releases air from the machine to allow for filling of abrasives:
OPERATOR'S SAFETY WEARS
JG-KSB are offered to safety wear for operator safe, comfortable and Hazard free working, in abrasive blasting operation dust and noise are generated so operator need protection in such environment.
Air fed Helmet
Helmet Air conditioner
Air breather,
Operator's suit
Hand gloves
Gum boots
APPLICATION
Mould / Die Cleaning
De-Sanding
De-Scaling
Preparation of surface for protective coating
De Rusting
Etching
De-Buring
SPECIFICATION FOR OUR STANDARD PORTABLE BLASTER
JG-KSB-P7-1001R
10CFT-1000KG METALIC GRIT, 15 TO 20 SQMTR PRODUCTION CAPACITY, NOZZLE 10/12mm, BLASTING HOSE 32mm, 240CFM AT 80PSI COMPRESSED AIR REQUIREMENT APPROX 75HP, FOR 12-80MESH GRIT, 250KG EMPTY WT., DIAxHT 800x1600mm.
JG-KSB-P7-501R
5CFT-500KG METALIC GRIT, 9 TO 12 SQMTR PRODUCTION CAPACITY, NOZZLE 8mm, BLASTING HOSE 25mm, 135CFM AT 80PSI COMPRESSED AIR REQUIREMENT APPROX 40HP, FOR 16-80MESH GRIT, 190KG EMPTY WT., DIAxHT 610x1400mm.
JG-KSB-P7-301R
3CFT-300KG METALIC GRIT, 4 TO 7 SQMTR PRODUCTION CAPACITY, NOZZLE 6mm, BLASTING HOSE 19mm, 70CFM AT 80PSI COMPRESSED AIR REQUIREMENT APPROX 25HP, FOR 25-80MESH GRIT, 150KG EMPTY WT., DIAxHT 365x1300mm.
JG-KSB-P7-150
1.5CFT-150KG METALIC GRIT, 3 TO 4 SQMTR PRODUCTION CAPACITY, NOZZLE 5mm, BLASTING HOSE 19mm, 45CFM AT 80PSI COMPRESSED AIR REQUIREMENT APPROX 15HP, FOR 35-80MESH GRIT, 100KG EMPTY WT., DIAxHT 365x1100mm.
Almandino Garnet Abrasive Normally Red/Brown In Color With A Higher Specific Gravity 7.2 And Hardness 7-7.5 Fe3al2(Sio4)3, Garnet Sand Abrasive, which is used in Sand Blasting, Water Jet Cutting and Polishing etc. It is used in the manufacture of abrasives, grinding wheels, Polishing Glass/TV tubes, as a sand blasting media & water jet cutting. We are reckoned as one of the most reliable Garnet Exporters and Suppliers in India. In the array of the Garnet Mineral, customers are eased with the availability of the Garnet Powder & Lumps in grades/sizes like 12/24, 20/40, 30/60, 40/80, 50/100.
Chloride 10-20ppm,
Conductivity 10-15ms/M,
Other Heavy Metals Less Than 0.01%
Chemical Composition:
Al2O3: 21.60%
SiO2: 31.00%
FeO: 37.00%
MgO: 7.40%
CaO: 1.84%
TiO2: 0.55%
MnO: 0.53%
Mineral Composition:
Garnet: 97 99%
Quartz: < 1 - 3%