Peroxide crosslinking agent TAICTriallyI isocyanurate(TAIC) Formula: C12H15N3O3 Molecular Weight: 249.27 CAS#: 1025-15-6Specification:
ProductsTAIC-ATAIC-BTAIC-PGradeRefinedNormalPowderAppearanceClear liquid or crystalClear liquid or crystalWhite powderHue(Pt-Co)
Crosslinking agent TAIC liquidCASNo.1025-15-6EINECS213-834-7CharacteristicsHigh quality crosslinking coagent for improvement of crosslinking efficiency by three functional allyl groups.With a triazine ring, heat resistance is greatly improved.Various polymers can be greatly improved by copolymerization.1Heat resistance2Mechanical characteristics3Hydrolytic resistance4Weather resistanceApplications PropertiesImprovement of various rubbers and fluorine rubber.Improvement of plastic.EVA film for solar battery encapsulation.Material for polymer alloy.PropertiesChemical formula C12H15N3O3Appearance Slightly yellowish liquid or white solidViscosity 80110mPas(30)Melting Point 2327Moisture Max 0.1%Packing:25kgs or 200kgs per drum 25kgs/bag
Radiation crosslinking agent TAICChemical name: Triallyl isocyanurateCAS No: 1025-15-6Density:1.11Melting point: 24-28°CVapor pressure: 3mmHg at 114°CSpecific gravity: 1.15 at 30°CBoiling point: 119-120°C (144°C at 3mmHg)Refractive Index(n30D): 1.5070~1.5100Flash Point: 245°C by Pensky-Martens MethodSolubility: not dissolves in water, slightly dissolved in alkane, and completely dissolves in aromatic hydrocarbon, alcohol, acetone, hydrocarbon halides and cyclopentane hydrocarbon, etc..Toxicity:LD50=660mg/kg(laboratory tested) All the homopolymers, copolymers and ethylene series of TAIC are non-poisonous. TAIC is widely used as a coagent for peroxide crosslinking or radiation crosslinking of Chlorinated Polyethylene (CPE), EPDM, Fluroelaster and so on.TAIC is availavle for linking by x-ray, y-ray electron or ultra violet ray radiation and the product polyolefines have the superior insolubility to solvents and the tensile strength at high temperature could be improved.TAIC is effective modifier to heat resistance with increasing of crosslinking density for peroxide crosslinking denisty for peroxide crosslinking of CPE. Since TAIC acts as an acceptor of HCI which is envolved from CPE at crosslinking reaction and deteriorates its physical properties.TAIC is the most effective coagent for crosslinking EVA.TAIC preferably contributes to promote crosslinking rate and also to improve its heat resistance, compression set and abrasion resistance
