SPECIFICATIONS
Test portTwo 10/100/1000M BASE-T RJ-45 ports; Two 100M/1000M BASE-X SFP optical fiber ports; Support 1 cu port+1 fiber port 2 fiber ports 2 cu ports single fiber port 1 cu port five modes
Management portOne WiFi one RJ45 10M
Power supplyOne Micro USB
Leds indicatePORT1/2 LINK ACT
error one yellow
Run one green CPU run lighting
Power charge one charging is red charged full is green
System controlOne on/off button one reset button for configuration reset
AC adaptinput 100-240VAC, 50-60HZ
output5V, 2A
Battery5 hours
temperature-10~45
humidity5%~95% Non condensation
Dimensions80x160x35mm
weight200g
featuresClient APP mode
RFC2544;throughputlatencyframe loss and back-to-back
Bert
One port 64 streams
Inline filter and capture support terminal mode and through mode
L1 L2 L3 loopback test
Copper TDR test
SFP DDM
Switch port locate
Ping ARP sweep Trace route
Configure file save and load
Ftp/Http/DHCP test
Test result save and output
Buttery management buttery detect and alarm
System time set
Temperature detect and alarm
Langrage English/Chinese
System info check product modehardware versionsoftware version
X8000 Series Load Modules
Network Testing Equipment
Network Test Modules
X8000 series test modules are high-performance professional load modules running on TestStorm series and support all the features of TestStorm platform. X6000 Series deliver complete wire-speed traffic test and protocol emulation for network equipment and network systems to meet the testing requirements in each stage of R & D, experiment and qualit
X8000 series test modules are high-performance professional load modules running on TestStorm series and support all the features of TestStorm platform. X6000 Series deliver complete wire-speed traffic test and protocol emulation for network equipment and network systems to meet the testing requirements in each stage of R & D, experiment and quality control.
X8000 series test modules support up to 8 x 10G COMBO ports and support Cross-chassis synchronizing to provide large-scale protocol emulation, performance test and mass traffic stress test of Layer 2-7 network device.
X8000 series modules support TeleExplorer, TeleAPP to meet different test needs. TeleExplorer is a standard test suite providing L2-7 test functions with powerful and flexible configuration. TeleAPP is a test suite to provide automated test of RFC2544 /2889/3918 with easy-to-use configuration and necessary test report output. X6000 also support TCL and API to meet customized testing requirements.
SPECIFICATIONS
Model X8004F X8002F
Port Number 4 * 10G 2 * 10G
Port Rate SFP+ 10G SFP+ 10G
Physical Status Indicators: Tx/Rx
Weight: 0.5kg
Size: 271mm x 35.5mm x 180mm
Peak power requirement: 100W Max
Traffic Generation Traffic generating based on port and stream, per port have 256 different streams
Each stream provide up to 4 saltus step domain with mode of increase, decrease and random
Accurate data rate regulation based on port and stream, support dynamic data rate regulation based on port
Each stream is capable of generating packets of Layer2, IPv4, IPv6, TCP, UDP, TCP-IPv6, UDP-IPv6, ICMPv4, ICMPv6, IGMPv2, ARP, Pause, Goose and custom
Each stream support multiple levels of VLAN and MPLS
Signature block is optional in each stream
Each stream supports user-defined packets and packet length from 60B to 16KB
Payload generation mode: Cycle, Incremented, Random
Traffic Statistics Statistics results can be displayed in the form of data table and chart
Each port can receive up to 1024 streams
Traffic statistics based on streams:
TX/RX frame count, TX/RX rate count, RX frame Sequence miss count, RX frame IP payload check errors count, Maximum, minimum and average SF latency count, Maximum, minimum and average CT latency
Others Easy-to-use graphical user interface
Support TCL API for customizing tests
SPECIFICATIONS
ModelTestStorm200
Dimension3U, 2-slot rack chassis
1000M PortsUp to 32
10G PortsUp to 8
PowerAC 110~240V
CPUIntel dual-core HF CPU
System ControlReset button, Power switch
Status IndicatorsPower, Fan, Temperature, Power of slots
Temperature0-50
Humidity0-95%, RH
Load Module AvailableX6000 Series, X8000 Series
Size489mm393.5mm110mm
Weight13kg
X SERIES LOAD MODULE
High performance and full-specification Ethernet test modules running on TestStorm series platform, providing a full-function Ethernet test solution.Armed with 36-core and more powerful processor, X series load modules deliver a unprecedented performance for complete Layer 2-7 network testing.Classified by the port rate: - X6000 series support 10/100/1000 Mbps per port - X8000 series support 10 Gbps per port.
ModelPort NumberPort RateDescription
X6004D8RJ4510/100/1000M SFP100/1000M4 RJ45 + 4 SFP ports, RJ45/SFP port (Combo), up to 4 port using at the same time
X6008D16RJ4510/100/1000M SFP100/1000M8 RJ45 + 8 SFP ports, RJ45/SFP port (Combo), up to 8 port using at the same time
X6016D32RJ4510/100/1000M SFP100/1000M16 RJ45 + 16 SFP ports, RJ45/SFP port (Combo), up to 16 port using at the same time
X8002F2SFP+10G SFP1000M2 SFP+ ports
X8002F4SFP+10G SFP1000M4 SFP+ ports
CHASSIS SPECIFICATIONS
Model BigTao200 BigTao220 BigTao6000
Slots 2 2 6
Power AC 110~240V
CPU Intel dual-core HF CPU Intel Atom E3845 CPU Intel dual-core HF CPU
System Control Reset button, Power switch
Cooling Devices 2 System Fans and 1 Power Fan 4 System Fans 2 System Fans and 1 Power Fan
Status Indicators Power, Hard disk Power, Fan, Temp, Link LCD Screen Power, Hard disk
Temperature 5-40
Humidity 20-85%, RH
Load Module Available P/V6000 Series, P/V8000 Series, P/V9000 Series, P/V9600 Series
Size 310mm 280mm 89mm 371mm 424mm 107mm 440mm 436mm 133mm
Weight 3.5kg 5kg 12kg
MODULE CLASSIFICATION
V Series Test Modules
High performance and full-specification Ethernet test modules running on BigTao series platform.
Supporting full functions of all Ethernet technology test needs.
Classified by the port rate:
V6000 series support 10/100/1000 Mbps per port
V8000 series support 10 Gbps
V9000 series support 40 Gbps
V9600 series support 100 Gbps
P Series Test Modules
P series test modules deliver network testing functionality on BigTao series test platform with high density.P series are specialized developed for comprehensive and automated testing of networking devices on production line.
Classified by the port rate:
P6000 series support 10/100/1000 Mbps per port
P8000 series support 10 Gbps
P9000 series support 40 Gbps
P9600 series support 100 Gbps
V Series Test Modules List
Module Name Ports Per Module Connecter Type Single Rate
V6016C 16 10/100/1000M RJ45 Copper 10/100/1000 Mbps
V6016F 16 1000M SFP Fiber 1000 Mbps
V6016M 8+8 10/100/1000M RJ45 Copper and 100/ 1000M SFP Fiber 10/100/1000
V8008M 4+4 10G RJ45 Copper and 100G SFP+ Fiber 10 Gbps
V8004M 2+2 10G RJ45 Copper and 100G SFP+ Fiber 10 Gbps
V9002F 2 40G QSFP+ Fiber 40 Gbps
V9602F 2 100G QSFP28 Fiber 100 Gbps
P Series Test Modules List
Module Name Ports Per Module Connecter Type Single Rate
P6016C 16 10/100/1000M RJ45 Copper 10/100/1000 Mbps
P6016D 12+4 10/100/1000M RJ45 Copper and 100/ 1000M SFP Fiber 210/100/1000 Mbps and 100/1000 Mbps
P6016E 8+8 10/100/1000M RJ45 Copper and 100/ 1000M SFP Fiber 10/100/1000 Mbps and 100/1000 Mbps
P6016F 16 100/1000 SFP Fiber 100/1000 Mbps
P6012C 12 10/100/1000M RJ45 Copper 10/100/1000 Mbps
P6012D 8+4 10/100/1000M RJ45 Copper and 100/ 1000M SFP Fiber 10/100/1000 Mbps and 100/1000 Mbps
P6012F 12 100/1000 SFP Fiber 100/1000 Mbps
P8008F 8 10G SFP+ Fiber 10 Gbps
P8004F 4 10G SFP+ Fiber 10 Gbps
P8004C 4 10G RJ45 Copper 10 Gbps
P8002F 2 10G SFP+ Fiber 10 Gbps
P8002C 2 10G RJ45 Copper 10 Gbps
P9002F 2 40G QSFP+ Fiber 40 Gbps
P9602F 2 100G QSFP28 Fiber 100 Gbps
NAMS (Rack-mounted)
Rack Mounted Ethernet Tester
Ethernet Network Tester
xnSight Network & Application Management System utilizes intelligent deep packet capture and analysis technology with full wire-speed stream-to-disk storage and non-block packets analyzing. It provides the real-time and historical analysis needed to support rapid problem isolation and user experience management in modern IP service delivery network
XnSight Network & Application Management System utilizes intelligent deep packet capture and analysis technology with full wire-speed stream-to-disk storage and non-block packets analyzing. It provides the real-time and historical analysis needed to support rapid problem isolation and user experience management in modern IP service delivery networks. The appliance is a passive device that is used to non-intrusively monitor key network links to provide the visibility into network and applications
Network & Application Management Center is grouped by the following c
omponents.
Appliance HW&SW appliance for packet capturing and analysis
Console Windows-based UI for network visibility, management and troubleshooting
KEY FEATURES
Integrated solution of data recording, traffic analysis and problem diagnostics
Comprehensive non-blocking end-to-end application monitoring and Key Performance Indicators (KPIs) generating
Wire-speed packet capturingIndex powered fast packet retrieval
Embedded packet analyzer for ultra-fast packets decoding and troubleshooting decoding and troubleshooting
Flexible monitoring enabled by auto application detection and user-configurable traffic definition
Intuitive UI for network visibility, service quality and security alarms
Multiple Ethernet network interfaces, from 10/100/1000 Mbps to 10 GBE over copper or fiber
Flexible on-demand storage capacity provides right solution for various networks
Rack-mounted and portable appliances for different on-site deployment needs
