JMY6281 is based on NXP PN512, CV520 chip design. It supports USB HID, UART or IIC interface and fully compatible with ISO14443 Type A, ISO14443 Type B protocols and also NFC function. The dimension is 50.8mm * 50.8mm * 7.5mm.
Jmy601 is based on nxp mf rc531, sl rc400, or cl rc632 chip design. It supports uart or iic interface and fully compatible with iso14443 type a and iso14443 type b and iso15693 protocols. The dimension is 60mm * 60mm * 5.7mm.
Description
Jmy601 is a series of rfid read/write module with uart or iic communication port. It has various functions and supports multi iso/iec standard of contactless card. The rf protocol is complex, but the designer combined some frequent used command of rf card and then user could operate the cards with full function by sending simple command to the module. The module and antenna is integrated. The impedance between rf circuit and antenna was tuned by impedance analyzer, and then the module has excellent performance and stability.
Main characteristics
Modules integrated antenna, excellent consistency and stability
light and slim
rf protocol in accordance with emv2010
Qualifications
Pcd: nxp mf rc531, sl rc400, cl rc632
Pcb layers4
Working frequency: 13.56mhz
Termsed standard: iso14443a, iso14443b, iso15693
anti collision ability: full function anti collision; be able to set multi-cards or single card
auto detecting card: termsed, default off, could be set
JMY6021 is based on NXP MF RC500, MF RC531, SL RC400 or CL RC632 chip design. It supports USB HID, RS232C, UART or IIC interface and fully compatible with ISO14443 Type A and ISO14443 Type B, ISO15693, and ISO7816(2 SAM Slots) protocols. The dimension is 100mm * 70mm * 10.6mm
JMY6122 is based on NXP CL RC663 chip design. It supports USB HID, RS232C, UART or IIC interface and fully compatible with ISO14443 Type A and ISO14443 Type B, ISO15693 and ISO7816(4 SAM Slots) protocols. Also it supports NFC functions. The dimension is 86.5mm * 65mm * 9.5mm.
JMY5011 is the second generation product based on JMY501 with UART and IIC serial port.JMY5011 has various functions and supports multi ISO/IEC standard of contactless card. The RFprotocol is complex. The designer combined some frequent used command of RF card and then usercould operate the cards with full function by sending simple command to the module.
The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability.
The module and antenna is split design. 4 wires are linked the antenna and module. Normally the wire should be less than 200mm, or it will affect the modules performance and stability.
JMY6804 is based on NXP CL RC663 chip design. It supports USB HID, RS232C, UART or IIC interface and fully compatible with ISO14443 Type A and ISO14443 Type B, ISO15693 and ISO7816(2 SAM Slots) protocols. The dimension is 70mm * 50mm * 16.5mm.
JMY6804 is a series of RFID read/write module. It has various functions and supports multi ISO/IEC standard of contactless card. The RF protocol is complex, but the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module.
The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability.
Main Characteristics
Ferrite plate under the antenna, good performance for metal-around environments
EMV2010 certification ability in RF protocol part
2 SAM slots, full fill payment system usage
USB HID interface, convenience to use on PC
Qualifications
PCD model: NXP CL RC663
PCB Layersï¼?4
Working frequency: 13.56MHz
Termsed standard: ISO14443A, ISO14443B, ISO15693, ISO7816,NFC
Anti collision ability: Full function anti collision; be able to set multi-cards or single card
Auto detecting card: Supported, default OFF, could be set
SAM slots: 2, T=0 & T=1 9600, 19200, 38400, 55800, 57600, 115200bps
Data FLASH: 512 Bytes
Power supply: DC 5V (±10%)
Interface: USB HID, RS232C, UART or IIC by order
Communication speed:
IIC: Max.200Kbps
UART: 19200bps, 9600bps, 38400bps, 57600bps, 115200bps
USB: 2.0 HID class
Interface level: UART / IIC 3.3V (5V tolerance)
Max. command length:
JCP04: 253bytes
JCP05: 510bytes
Power consumption: Max. 150mA
Operating distance: 70mm (M1 typical distance, depending on card quality)
Dimension: 70mm * 50mm * 16.5mm
Weight: About 120g
ISP: Supported
RoHS: By order
CE certification: in plan (Jan.17,2015,soon)
Operating temperature: -25 to +85°C
Storage temperature: -40 to +125°C
