1.Detachable designï¼?depth of the front part is 450mm,swing opening type,
depth of the back part is 150mm, wall mounted , convenient for assembly and
Maintenance.
2. Front door is made with tempered glass of 5mm thickness. Removable side
doors are handy for cable arrangement.
3. Mounting holes at the back are matched with M8 bolt for wall mounting. Also
can be used as cable entrance.
4. Quality SPCC cold rolled steel sheet of 1.0 2.0mm.
5. Top and bottom covers both have cable entrance, side panels and front door
have the air vents above and below, top cover has a vent with a fan.
6. Interior width meets the Chinese Standard 19'', Devices are adjustable
vertically (by 1U = 44.45mm), and also can be adjusted forward and backward
1. Frame is done with welded process
2. Front door is made with tempered glass of 5mm thickness. Side panels are
unable to remove which has vents on them.
3. Quality SPCC cold rolled steel sheet of 1.0 1.5mm.
4. Mounting holes at the back are matched with M8 bolt for wall mounting.
5. Interior width meets the Chinese Standard 19'', Devices are adjustable
vertically (by 1U = 44.45mm), and also can be adjusted forward and backward
1. Frame of the cabinet is made by steel in which designed with the structure
of being bent for nine times which ensure the devices arrangement being
convenient and flexible.
2. Quality SPCC cold rolled steel sheet, 2.0mm thickness of the door, 1.5mm
thickness of panels, 2.5mm thickness of galvanized mounting plate (optional).
3. upper and lower doors have zinc alloy hinge and a non-reflective tempered
glass window of 5mm thickness (optional).
4. The middle part has humane drawer for keyboard and mouse
5. Both upper and lower doors have luxury handle lock.
1. The enclosure cabinet is made by the steel with ten times bent for highly
strength, so the structure is firm, able to carry a heavy load. The cost of this
cabinet is lower than the PS cabinet.
2. We apply SPCC cold rolled steel or stainless steel for all of our products, 2mm
thickness of front door, 1.5mm thickness of panels, 2.5mm galvanized mounting
plate.
3. The size of ES and PS series cabinets can be matched with each other, and
the parts and accessories are versatile. They can be quickly installed.
4. The front door is of single or double door, with an Angle of 130 degrees, the
height of the door to the ground is 25mm.the reinforcing frame is inside the
front door, equipped with to 25 mm spacing of mounting holes. In addition, the
front door provides mounting crossbar to strengthen it and more flexible to
binding cables.
5. The rear panel is fastened by bolts and fasteners.
6. Mounting plate can be adjusted back and forth for the distance of multiple
of 25mm, the door, panels are all able to earth. There are 3 adjusted fixed shelf
at the bottom for cable arrangement.
1. Double door and single door are optionally available.130 degree door swing.
2. U shape forming seal designed for water proof and dust proof.
3. Quality SPCC cold rolled steel sheet or stainless steel sheet: 1.5-2.0mm
thickness of door, 1.2-1.5mm thickness of panels, 2.0-2.5mm thickness of
mounting plate (galvanized, baking finish)
4. The doorâ??s inward side has bars with little holes for cable arrangement on
both left and right sides. The bars are also increasing the doorâ??s strength.
5. There is a cable entrance at the bottom of the cabinet with removable cover
fixed by bolts and a rubber seal. Top cover is optional for normal plat type and
waterproof type.
6. There are hang holes on the back panel, with hang accessory. Inward side
of the back panel has a mounting plate.
1. Unique folded design for more distribution space.
2. Itâ??s enclosed with Polyurethane foam done with Instant-formation Technology,
and fixed by bolts and rubber sealing rings on the top cover to ensure that it
meets IP66.
3. Interior has trunking base or mounting plate or mounting kit.
4. Quality SPCC cold rolled steel sheet, 1.2-1.5mm thickness of panels, 1.5-
2.0mm thickness of top cover.
5. There are hang holes on the back plugged with rubber plugs by default, wall
mount kit for optional.
1. consummate manufacture skill, delightful appearancecontrol panel with
sloping design in compliance with safety regulations and ergonomics could
reduce the tiredness in operation. Therefor its more ease for operator.
2. Front door, rear door and control panel are openable, handy for arrangement.
Inner mounting plate is adjustable to back and forth for the distance of multiple
of 25mm.
3. Front door, rear door and control panel all have PU FOAM strip on the inner
surfaces, meets IP54 standard.
4. Control panel attaches to hood struts which makes it a higher grade. Its
handy for maintenance and arrangement.
5. Receive clients requirements, extra custom for single form, double or triple
combination form. Holes-making service is available.
1. Quality SPCC cold rolled steel sheet of 1.2-2.5mm thickness.
2. Frame of the cabinet is made by steel in which designed with the structure of being bent for nine times, small cross-section. So that it is much more firm and stable, able to carry a big load, it is provided by Guangzhou Jujin Industrial
Technology Co. , Ltd and it meets the National Standard 19''. Devices are adjustable vertically by the distance of 25mm according to the international practice (1U = 44.45mm). Our brand is GDHW which is representative of high
quality. It's very flexible to configuration.
3. Front and rear perforated door designed with holes of high density (rear door can be single or double door).
The rate of ventilation is up to 78% or more. It forms a delightful appearance.
4. Creative and specialized design of top cover for distributing cables, capability for distribution of high density. Our website is gzjujin.net. It's s concerned to be used in all kinds of environment.
5. high-duty casters and levelling feet at the bottom ensuring the loading capacity up to 1050KG.
6. There are interior trays of the cabinet which can be adjusted forward and backward, up and down. (sliding trays are optional), and four adjustable vertical rails.
7. customizable for different specifications and interior of cabinet
8. Mainly apply to management for high-performance professional IT devices, telecommunications, security system, major IDC data centres.
1. Detachable design, simple structure, practicability with low cost, easy to
package, transport and assemble.
2. Able to add attachments which for optional (19 devices/cable manager/U
type shelf/movable or fixed tray/etc.)
3. Meets the national standard 19, 1U=44.45mm as the distance of multiple
to raise, 2 poles or 4 poles for standard.
4. Applying quality SPCC cold rolled steel sheet of 2.0 2.5mm, static loading
capacity is up to 400KG.
5. Receive clients requirement or design drawing specializing.
