Purpose:
UV Lamp tester adopt fluorescent lamp simulating the UV spectrum of sun shine, combined with temperature control, humidity system. It can simulates various of conditions such as temperature, shining strength and humidity to evaluate the breakage, peeling, pulverization, oxidization of the specimen.
Specification:
Model Z-UV
Temperature range RT+10~70
Humidity range 90% RH ~98% RH
Temperature unifirmity 2
Temperature fluctuation 2
Distance between lamps 702mm
Distance between specimen and lamp 502mm
Irradiance level 1.0W/m²
Lamps type UV-A, 40W / UV-B, 40W
UV light wavelength 315~400nm/280~315nm
Standard test shelf 75x300mm(3x12�)/23 or 100x300mm(4x12�)/15
Lamps amount 8 sets
Nozzle: 12 pieces
Light Size: W450xH260mm
Main unit dimension (WxDxH) 580x280x1450mm
Main unit weight 130 Kg
Power supply AC220V 50Hz 3KW or specified by user
Introduce
Temperature and Humidity Test Chamber is designed for testing the capability of heat-endurance, cold-endurance, dryness-endurance, and humidity-endurance, it is suitable for quality control of the industries of electron, electrical equipment, vehicle, metal, foodstuffs, chemistry, building materials, luggage, printing, packaging, etc.
Featurers
1)The separation of humidifier circuit from electric circuit improves safety and protects the circuit against the leakage of water supply line.
2)Available in Chinese and English LCD touch screen, easy operation and program.
3)Able to display the relative date and information of the whole operating system in running mode, graphic display. precautions, maintenance and troubleshooting appear on the screen instantly.
4)The Sirocco fan motor provides greater cyclic airflow to avoid dead corner in the chamber so as to obtain an uniform distribution of temperature and humidity.
5)The system of heating up, heating down, dehumidifying, and humidifying can be operated independently so as to reduce the cost of testing, extend the operating life of the machine and decrease the failure rate.
6)Water Supply adopts automatic watering System, Circulating water supply together with water filter.
Introduction
Competitive Price Constant Climatic Walk in Chamber used to test various types of materials for their tolerances under condition of heat, cold, dry, humidity.
Application:
For all types of electronic products quality inspection , electric appliance, andcommunication, instrument, automobile, plastic, metal, food, chemical, building materials, medical and aerospace industries products.
Model BRS Series ( 4m~120m specified by user )
Temp-range A:-20~+150, B:-40~+150, C:-70~+150
Humid-range 20% R.H ~98% R.H ( Can specified low temp and low humid )
Temp. Accuracy 0.5
Humid. Accuracy 3%R.H
Heating and cooling speed 5/min, 10/min, 15/min (Standard load 5~30Kg Aluminum Ingot )
Interior material Stainless steel SUS304 (mirror)
Exterior material Spray-paint zinc plating steel panel
Thermal Insulation material Hard polyfoam+ glass fiber
Cooling system Cooling by Bitzer semi hermetic compressor
Accessories Observation window( double tempered glass), Double-door:0.8x1.8M,Anti-explosion light, Interior LED lighting, control box 1set
Safety device Switch, Over voltage protection, over heat protection, over current protection over temperature protection and water-lacking protection for Compressor.
More Products
Features
1.Used in various rang of temperature and humidity environment,can meet different testing requirements.Adopting BTHC uniqe control method, with safety and accurate temperature and humidity environment.
2.Equipped with high precision digital display temperature and humidity controller
3.Refrigeration circuit performation controlled by temperature setting value automatically,capable of starting up condenser under high temperature,direct cooling.
4.With wide view glass window,easy to observe the testing process.
5.Protection system: Electrical breaker,overheat protection,phase absence protection,water shortage alarm.
ALTITUDE TEST CHAMBER
Altitude test chambers combine temperature and altitude with optional humidity for simultaneous environment testing.
Features
External pressure type box body structure and stainless steel tank design, rational air circulation system and scientific layout of heating, refrigerating system.
Adopts international brand of imported parts for cooling system to improve operation reliability
High precision and stable performance with touch screen controller, friendly Man-Machine interface.
Multiple layers of safety device to easy maintenance.
Standards Implement and Met
GB11159-89
GB10590-89
GB15091-89
GB/T2423.25-1992
GB/T2423.26-1992
GJB150.0-86
Specifications
1. Dedicatetouch and excellent user experience
2. Unique and compact design, top grade appearance, stable performance and easy operation
3. Can simulate a wide rang of temperature and humidity environments
4. Capable of testing large components, assemblies, and finished products
5. Customized sizes and configurations available
6. One year warranties
Laboratory used salt spray chamber can determine the corrosion resistance of iron metal or the iron metal inorganic film or organic film test, such as: electroplating, anode processing, conversion coating, painting, ect.
Laboratory used salt spray chamber is an accelerated corrosion test that produces a corrosive attack to the coated samples in order to predict its suitability in use as a protective finish. The appearance of corrosion products (oxides) is evaluated after a period of time. Test duration depends on the corrosion resistance of the coating; the more corrosion resistant the coating is, the longer the period in testing without showing signs of corrosion. Different coatings have different behaviour in salt spray test and consequently, test duration will differ from one type of coating to another.
Model YWX/Q-150(60) YWX/Q-250(90) YWX/Q-750(120) YWX/Q-1000(160)
Test room size(WxLxH)mm 600x450x400 900x600x450 1200x850x500 1600x1000x600
Machine size (WxLxH)mm 1130x630x1070 1460x910x1280 2200x1200x1450 2600x1450x1600
Lab temperature NSS.ACSS 35°C 1°C / CASS 50°C 1°C
Saturator temperature NSS.ACSS 35°C 1°C / CASS 50°C 1°C
Humidity 85%~98%RH
Temperature range 0.5??
Salt spray subside 1.0~2.0ml/80cm2/h
Power supply AC220V 10A or specified AC220V 15A or specified AC220V 20A or specified AC220V 30A or specified
More Products
Programmable High-temperature Test Chamber,Drying Oven / Dryer
Purpose:
The company's high-temperature constant-temperature test chamber has a precise temperature control system, and implements the standards: GB / T 11158-2008, GB / T2423.2-2008, which offers various environmental simulation conditions needed by industrial research and biotechnology test. It is widely used in tests of raw material performance, product packaging and product life of products in electronic, pharmaceutical, textile, automotive and other industries.
3-ZONE THERMAL SHOCK CHAMBER
Thermal Shock Test Chamber is used to test the capability of material structure or composite materials to withstand the continuous environmental changes between extremely high temperature and low temperature during a short time, and therefore understand the chemical changes or physical damages caused by expansion from heat and contraction from cold in the shortest possible time. It is applicable to metals, plastic, rubber, auto parts, chemical materials, electronics and other materials. The test results can be used as a reference or basis for product improvement.
Working Principle
This is so called three-zone type thermal shock test chamber.
Sample is placed in the test chamber, more extreme temperature than test temperature can be set in high-temperature chamber and low-temperature chamber. When it comes to low temperature test, cold chamber door open, and low-temperature chamber working together with test chamber.
When converted into high-temperature test, cold chamber door closed, hot chamber door are opened, and test chamber working together with high-temperature chamber.
Conversion of mechanical action (transferring from high temperature to low temperature or low temperature to high temperature) can be completed in less than 1second, and the temperature can be quickly stabilized.
During the whole test, test sample is no need to be moved, and without any human intervention.
Applications
3-zone Thermal shock chamber have been designed to operate in accordance with reliability programs, quality control, commercial test programs and medical tests. It is used to test the capability of material structure or composite material to withstand the continuous environmental changes between extremely high temperature and low temperature during a short period. It is applicable to metals, plastic, rubber, electronics amongst other materials. The test result can be used as a reference or basis for produce improvement.
Features
1.Thermal shork chamber in each zone for peak demand of heating and cooling. Provides extra thermal energy to efficiently meet the MIL-STD 883 requirements.
2.Temperature recorder provides 24 hour part temperature recording as the load travels from zone to zone. Using touch-control graph control as operation interface, easy to operate.
3.The system can be used for automatic Circulation Shock or manual selective shock, capable of setting two zones or three zones shocks as well as cold and thermal shock start-up.
4.Custom-made and optional accessories available.
Standards Implement and Met
GB/T 2443.1-2001 Test A: Low temp. Test;
GB/T 2443.2-2001 Test B: Low temp. Test;
GB/T 2443.22-2002 Test N: Low temp. Test;
GJB 150.3-1986 High Temp. Test;
GJB 150.4-1986 Low temp. Test;
GJB 150.5-1986 Temp. Impact Test;
(Load refer to 5.5.5 no active load)
Purpose:
This tester applies for the function test of electronics, measurements, shell, sealed parts under watering circumstances. The cabinet is fully made of stainless steel with transparent observation window, with a turntable for specimen in test cabinet, with variable frequency speed adjuster, working angle:90°,180°& 270° for option.
This product is applicable for the dust proof and resistant test of various auto components
and parts including lamps, meters, electric dust proof sheath, steering system and lock etc.
It is designed according to GB4706, GB2423, GB7000.1, IEC60529, ect standards and meets
the IPX5 and IPX6 dust test requirements. It is also used for testing control cabinet, householdappliances, low voltage electric appliance, automobile, lamps and lanterns, motorcycle parts outer shells and so on. Test chamber pressure can be constant and changed, suitable
for indoor low concentration dust pollution test, assessment sample in this environment of
sealing and corrosion degree.
Specification:
Model SC-500 SC-1000
Working-room Dim(WxDxH) 800x800x800 1000x1000x1000
Temperature of heated dust RT~60°C
Humidity
Vibration Tester with Humidity Temperature Testing Equipment integrated temperature, humidity, vibration of the three functions of the test box.With rapid temperature change rate, temperature, and humidity integrated test environment and the vibration function.
Combined environmental test equipment provides the change of temperature and humidity environment for the aerospace, aviation, petroleum, chemical, electronics, communication and other scientific research and production units, at the same time in the test chamber electric vibration stress according to the provisions of the cycle is applied to the sample, for the user of the machine (or components), electrical appliances, instruments, materials etc. temperature and humidity, vibration stress screening test, in order to assess product adaptability or experiment on behavior evaluation.
Purpose:
Computer-control This UTM are suitable for the testing of tensile, compression, shearing force, adhesion, peeling force, tear strength, fatigue etc for semi-product & finished product in the field of rubber, plastic, metal, nylon, non-woven fabrics, textile, tape, polyfoam, waterproof material, electric wire, electric cable, etc., which are the basic facilities for input quality control(I.Q.C), Quality Control(Q.C.), Physical inspection, Mechanics research and material development.
Can achieve the closed loop control in force value, speed & displacement, so can satisfy the fatigue test of rubber and durable test of other material in the condition of low cycle.
Can record and memorize the whole testing data.
Applications:
Use in testing Adhesive tape, motorcar, ceramics, composite materials, architecture, food, medical equipment, metal wire, rubber, plastic, textile, wood, communication.
