Disposable face masks, 3-Layer, Anti Dust,Prevent Coronavirus, Breathable Face Mask Sanitary men and women mask, CE certified,Safe and breathable.
Hypoallergenic,high filtration,capacity.
Clean and helpful.
Elastic ear-loops with no pressure to the ears.
Provide some protection against dust, or some poisonous things.
1000 sets per carton
The bluetooth RF module can replace 2.4GHz RF module, it can work with IC KA8,V108,MX8650A and so
Bluetooth RF module is better than 2.4GHz RF module, this product can be sell all over the world
Support usb
5v power supply
Compatible microsoft 3d intellimouse
Support microsoft os, including vista, xp, 2000, me, 7, 10, and so on
Support r/m/l key, support mechanical z shaft encoder
Cpi: 1200/800, or dynamic transfer 400-800-1200-1600
Sleep mode and automatic wake-up function
Built-in power management
Built-in led drive
High integration, very few peripheral components
Built-in oscillator
Meet rohs
Dip12 package
Features
Signle power supply
Power range 1.7V -3.2V
Precision optical displacement prediction technology
Very good 2-D motion sensor
Support extremely fast moving speed
Maximum speed of movement 28 Inch/sec CPI
CPI: 400/ 500/ 600/ 800/ 1000(Default)/ 1200
/ 1600
Once stop moving, immediately enter the energy saving model
Data transmission is achieved through serial interfaces
Built-in low power timer (LPT),sleep1/sleep2 models
The mouse can be awakened by the MOTSWK pin, and the sensor is
controlled to wake up from the sleep mode.
Built-in oscillator LED current-limiting resistance 68-470
Ohm(Determine by the actual plane),recommend 100 Ohm.
DIP8 package
Description
KA8 is a high integration optical mouse sensor, which have minimal
external components . It is compatible with Microsoft 3D IntelliMouse, and
CPI can be adjusted though fixed CPI register.
1. General Description
The MX8733B chip is a low cost single chip optical mouse solution used to implement a
non-mechanical tracking engine for computer mice. It is based on optical navigation technology with
USB combo MCU bundled. Which measures changes in position by optically acquiring sequential
surface images(frames) and mathematically determining the direction and magnitude of movement.
The single chip optical mouse sensor provides a complete and compact mouse solution, There are no
moving parts, and precision optical alignment is not required, few outside components use and
facilitate high volume assembly. It is a true crystal-less and ultra low cost solution.
2. Features
â?�Optical Navigation Technology
â?�Low-cost and powerful solution for low-speed USB combo mouse
â?�Universal Serial Bus Specification, version 2.0
â?�USB HID Specification, version 1.1
â?�USB-IF and WHQL compliable
â?�5V Power Supply
â?�Power Saving During No Motion
â?�On Chip LED Drive with Regulated Current
â?�Crystal-less
â?�Resolution 1000CPI
â?�Low EMI radiation
â?�Supports 3D (X, Y, Z) input
â?�Supports 3 buttons and mechanical wheel encoding
SL2.1A is a single 5V power supply chip. The Integrated LDO(Include one
5v->3.3v LDO and one 3.3v->1.8v LDO) make the solution so simple. Only
some capacitances needed for PCB. The chip also integrates Power-On-Reset
circuit.
Fully compliant with USB spec. Rev 2.0(USB 2.0)
12M crystal oscillator must be matched when using SL2.1A
5
Upstream facing port supports HS (480MHz) and FS(12MHz) modes
4 downstream facing ports support HS(480MHz), FS(12MHz) and
LS(1.5MHz) modes.
Integrated USB 2.0 Transceivers.
Connected external 12MHz Crystal Oscillator is recommended for this chip.
We insist on creating screen frames through more rigorous processes, and the reduction of screen frames every minute is a legendary test of the process. Boundless horizon, large screen view, wider field of vision, wonderful at a glance
Compliant to USB specification Revision 2.0
Support 4/3/2 donwnstream ports by I/O pin configuration
Upstream port supports both high-speed(HS) and full-speed(FS) traffic
Downstream ports support HS,FS, and low-speed (LS ) traffic
Please contact me to get samples and datasheet, These modules can work with mouse IC KA8,MX8650A,V108 and so on.
Please contact me to get samples and datasheet
Support USB and PS2
5V power supply
Compatible Microsoft 3D IntelliMouse and IBM mouse.
Support Microsoft OS, including Vista, XP, 2000, ME, 7,10 and so on
Accord with Microsoft WHQL and USB-IF
Support R/M/L key, Support mechanical Z shaft encoder
CPI: 1200/800, or dynamic transfer 400-600-800-1200-1400-1600
Sleep mode and Automatic wake-up function
Built-in power management
Built-in LED drive
High integration, very few peripheral components
Built-in oscillator
Meet ROHS
DIP12 package
Signle power supply
Power range 1.7V -3.2V
Precision optical displacement prediction technology
Very good 2-D motion sensor
Support extremely fast moving speed
Maximum speed of movement 28 Inch/sec CPI
CPI: 400/ 500/ 600/ 800/ 1000(Default)/ 1200/ 1600
Once stop moving, immediately enter the energy saving model
Data transmission is achieved through serial interfaces
Built-in low power timer (LPT),sleep1/sleep2 models
The mouse can be awakened by the MOTSWK pin, and the sensor is
controlled to wake up from the sleep mode.
Built-in oscillator
LED current-limiting resistance 68-470
Ohm(Determine by the actual plane),recommend 100 Ohm.
DIP8 packag
2.4 GHz ISM band (2400-2483 MHz)
Modulation: FSK/GFSK
Vacuum Rate: 500Kps, 1Mbps, 2Mbps
8dBm transmission power
Receiving Sensitivity of-88dBm
Single-ended antenna feeding
Single inductance network
Single crystal oscillation
Fast Frequency Hopping Algorithms
15 m transmission distance
High-speed mobile detection reaches 28 inches per second
The frame rate reaches 3000 frames per second.
Supports three-file resolution 1200 (default)/1600/800 CPI
Built-in low power sleep Sleep1/Sleep2/Power down mode
Supporting remote wake-up function
Good Compatibility of Computer Host and Operating System
Wide power supply voltage range 2.0V-3.6V
3D 6K: LBUTTON, MBUTTON, RBUTTON, KEY4, KEY5, DPI
Power Dynamic Control Technology and Power Management
Support offline detection
Compliance with safety regulations
Support button wake-up mode
Ultra-low power consumption is about 4.0mA (excluding typical value of LED current)
Dormancy power consumption: about 20 uA
SDIP14 package
Features
â??Signle power supply
â??Power range 1.7V -3.2V
â??Precision optical displacement prediction technology
â??Very good 2-D motion sensor
â?? Support extremely fast moving speed
â?? Maximum speed of movement 28 Inch/sec CPI
â??CPI: 400/ 500/ 600/ 800/ 1000(Default)/ 1200/ 1600
â??Once stop moving, immediately enter the energy saving model
â?? Data transmission is achieved through serial interfaces
â??Built-in low power timer (LPT),sleep1/sleep2 models
â??The mouse can be awakened by the MOTSWK pin, and the sensor is
controlled to wake up from the sleep mode.
â?? Built-in oscillator
â??LED current-limiting resistance 68-470
Ohm(Determine by the actual plane),recommend 100 Ohm.
â?? DIP8 package
Description
MX8650A is a high integration optical mouse sensor, which have minimal
external components . It is compatible with Microsoft 3D IntelliMouse, and
CPI can be adjusted though fixed CPI register.
1. Chip Description
MS8310 is a highly integrated chip designed for 2.4G wireless mouse. It innovatively realizes the radio frequency module of 2.4G wireless mouse.
Three-in-one modules of main controller and optical sensor
Radio Frequency Module of Wireless Mouse,
The main controller module and the optical sensor module are integrated into one chip technology. With very few peripheral components, 2.4G wireless can be realized.
Mouse has excellent anti-interference, high sensitivity, very low power consumption and other performance, and can maximize support for simplified production.
2. Main characteristics
2.4 GHz ISM band (2400-2483 MHz)
Modulation: FSK/GFSK
Vacuum Rate: 500Kps, 1Mbps, 2Mbps
8dBm transmission power
Receiving Sensitivity of-88dBm
Single-ended antenna feeding
Single inductance network
Single crystal oscillation
Fast Frequency Hopping Algorithms
15 m transmission distance
High-speed mobile detection reaches 28 inches per second
The frame rate reaches 3000 frames per second.
Supports three-file resolution 1200 (default)/1600/800 CPI
Built-in low power sleep Sleep1/Sleep2/Power down mode
Supporting remote wake-up function
Good Compatibility of Computer Host and Operating System
Wide power supply voltage range 2.0V-3.6V
3D 6K: LBUTTON, MBUTTON, RBUTTON, KEY4, KEY5, DPI
Power Dynamic Control Technology and Power Management
Support offline detection
Compliance with safety regulations
Support button wake-up mode
Ultra-low power consumption is about 4.0mA (excluding typical value of LED current)
Dormancy power consumption: about 20 uA
SDIP14 package
Support USB
5V power supply
Compatible Microsoft 3D IntelliMouse
Support Microsoft OS, including Vista, XP, 2000, ME, 7,10,and so on
Support R/M/L key, Support mechanical Z shaft encoder
CPI: 1200/800, or dynamic transfer 400-800-1200-1600
Sleep mode and Automatic wake-up function
Built-in power management
Built-in LED drive
High integration, very few peripheral components
Built-in oscillator
Meet ROHS
DIP12 package
