DSY-004A is designed to determine the kinematic viscosity of liquid petroleum products with a Circular glass bath which accommodates Pinkevitch, Cannon Fenske, and Reverse Flow viscometers, etc (Equipped with Pinkevitch viscometers).
DSY-004A has a built-in WinCE based MCU. It not only can control the accuracy of the bath temperature in 0.01 but also can automatically calculate viscosity results by pushing a start-stop input button (No optical sensor detection system).
120 kinds of viscometers constant can be stored and XML format data can be provided with LIMS. 10 inch touch color screen displays the batch temperature. Meanwhile, shows us two viscometers measuring times and its kinematic viscosities.
DSY-412 is used a circular transparent glass cylinder with bottom lighting ,so it is easy to watch the density meter.
Digital display of temperature, high precision of PID temperature controller.
It is possible to do 2 tests simultaneously.
Compressor refrigeration technique, rapid cooling
DSY-004A is designed to determine the kinematic viscosity of liquid petroleum products with a Circular glass bath which accommodates Pinkevitch, Cannon®Fenske, and Reverse Flow viscometers, etc (Equipped with Pinkevitch viscometers).
DSY-004A has a built-in WinCE ® based MCU. It not only can control the accuracy of the bath temperature in ±0.01 but also can automatically calculate viscosity results by pushing a start-stop input button (No optical sensor detection system).
120 kinds of viscometers constant can be stored and XML format data can be provided with LIMS. 10 inch touch color screen displays the batch temperature. Meanwhile, shows us two viscometers measuring times and its kinematic viscosities .
Dalian Petroleum Instrument Co., Ltd.
DSY-004A is designed to determine the kinematic viscosity of liquid petroleum products with a Circular glass bath which accommodates Pinkevitch, Cannon®Fenske, and Reverse Flow viscometers, etc (Equipped with Pinkevitch viscometers).
DSY-004A has a built-in WinCE ® based MCU. It not only can control the accuracy of the bath temperature in ±0.01 but also can automatically calculate viscosity results by pushing a start-stop input button (No optical sensor detection system).
120 kinds of viscometers constant can be stored and XML format data can be provided with LIMS. 10 inch touch color screen displays the batch temperature. Meanwhile, shows us two viscometers measuring times and its kinematic viscosities .
Dalian Petroleum Instrument Co., Ltd.
DSY-202ZA is the second generation instrument that is designed according to GB/T261 and ASTM D93; it is suitable to the determination of flash point of petroleum products automatically.
Characteristic:
1. Igniting method can be by electricity and gas option.
2. MCU controlled, igniting, detecting and judgment of flash point, printing automatically, Touch screen display.
3. Display test status in real time
4. Set the expected flash point, the highest flash point, ignition times, detection sensitive
5.Built-in barometer pressure sensor, it can be calibrated barometer pressure in test result according to the measure barometer pressure
6. Automatic lifts arm to the complete upright position after testing
7.Easy to remove the detection device by hand, and easy to repair and clean
8. The sliding plate that is on the test cup cover, which can be removed easily, and can be cleaned each time, make the result more accuracy
DSY-003ZB is designed to perform automatic distillation of petroleum products like gasoline, fuel oils, kerosene, naphtha and other solvent products. DSY-003ZB can automatically control distillation rate, recovery volume and determinate the IBP, FBP, DP and residue corrections.
10 inch touch screen can display simultaneously the temperature of heater, steam, cooling tube, receiver compartment. Three kinds of curves (distillation rate, heating temperature, steam temperature) can be displayed in real-time as well.
LCD touch screen, English system customized
Built-in accurate air pressure sensor to ensure precision of the tests
A Class PT 100 temperature sensor
Automatic fire detection and extinguishing
Condenser temperature range: 0--60
Receiving room temperature: 0--50
Produced by Dalian Petroleum Instrument Co., Ltd.
Fully automatic apparatus
Dynamic display test process
Small sample size, short time test
Standard ASTM D5191
Scope Determine the total vapor pressure of air-containing, volatile liquid petroleum products,
Characteristic
Embedded operation software, touch display screen
Fully automatic operation, eliminate errors introduced by human operation
Self-diagnostic function, dynamic display test process
I/O Port: COM port and Ethernet for LIMS; USB port for flash memory
Large store memory, history results enable to be searched and printed out.
Sample inlet can be sealed automatically, patented auto drain out waste liquid design
Only 3ml sample need for each test
Around 7 minutes for each test
Main parameters
Test range0KPa -200KPaprecision: 0.1KPa
Temperature display range-50ï½?75
Temperature control precision37.8±0.1
DSY-202ZA is the second generation instrument that is designed according to GB/T261 and ASTM D93; it is suitable to the determination of flash point of petroleum products automatically.
Characteristic:
1. Igniting method can be by electricity and gas option.
2. MCU controlled, igniting, detecting and judgment of flash point, printing automatically, Touch screen display.
3. Display test status in real time
4. Set the expected flash point, the highest flash point, ignition times, detection sensitive
5.Built-in barometer pressure sensor, it can be calibrated barometer pressure in test result according to the measure barometer pressure
6. Automatic lifts arm to the complete upright position after testing
7.Easy to remove the detection device by hand, and easy to repair and clean
8. The sliding plate that is on the test cup cover, which can be removed easily, and can be cleaned each time, make the result more accuracy
