Pvc Pipe Making Machine
DETAILS INTRODUCTION:
PVC pipe material production line is mainly used in the area of agricultural water supply system, architectural water supply system, pavement of cables, etc. as well as PVC pipe material of all sorts of pipe caliber and wall thickness.
This machine group consists mainly of twin conical (parallel) screws extruder, vacuum calibrating tank, haul-off unit, cutting unit, tilter, etc. single screw extruder and haul-off unit have applied imported A/C inverter, both vacuum pump and driving motor have applied excellent products.
The drawing machine includes two-claw type, three-claw type, four-claw type, six-claw type, eight-claw type, etc. Saw cutting or planet cutting can be applied, it is additionally applied with length measuring meter and thickness increasing device, the property of machine group is reliable, the production efficiency is high.
TECHNICAL PARAMETER (FYI):
SPECIFICATIONS FOR PVC PIPE PRODUCTION LINE
ModelPipe Diameter Range(mm)ExtrudersMax Output(kg/hr)Max Speed(m/min)Total Power
(KW)Line Length(m)
PVC-50X216-50SJ SZ51/1051 5066020
PVC-6316-63SJSZ55/113120104520
PVC-11050-110SJSZ6 5/13215066024
PVC-16063-160SJSZ65/132300510024
PVC-250110-250SJSZ80/1564003.512028
PVC-315160-315SJSZ80/156400316028
PVC-450250-450SJSZ92/1887001.520036
PVC-630315-630SJSZ92/1887000.923036
-
Large PE Pipe Production Machine
PVC Pipe Making Machine
PVC Pipe Line
DESCRIPTION FOR PE PIPE PRODUCTION MACHINE
This pe pipe extrusion line can be used in HDPE Large Diameter Gas and Water Pipe which have excellent stiffness and flexibility, heat resistance, aging resistance, high mechanical strength, resistance of environmental stress cracks, resistance to creep deformation, heat-linkage, and so on. So, this pipe production line is a preferred gas and water pipe for ductwork system between city and its suburb, Large diameter HDPE pipes start to play very important role in the city water and gas supply systems.
THE COMPLETE EXTRUSION CONSISTS OF FOLLOWING ITEMS
l. Single screw extruder
2.Co- extruder to manufacture marking multi-layers of pipe
3. Die head
4. Vacuum tank due t o diameter, it can be designing of single, double vacuum chambers
5. Cooling tank due to diameter, the numbers of cooling tanks can be one or two
6. Haul-offs due to diameter, it can be designing of double or three caterpillars
7.Cutter no scraps cutter.
8. stacker
MAIN PARAMETERS:
Item SJGF110 SJGF250 SJGF400 SJGF630 SJGF800 SJGF1000 SJGF1200
Dia.(mm) 20-110 110-250 250-400 400-630 630-800 500-1000 630-1200
Main machine SJ25/25SJ65/33 SJ25/25SJ75/33 SJ25/25SJ90/38 SJ25/25SJ120/38 SJ150/38 SJ150/38 SJ90/38SJ120/38
Max. capacity (kg/h) 80-160 200-350 400-600 700-900 900-1200 900-1200 900-1400
Total power (KW) 110 260 400 500 600 600 900
Small caliber PE Pipe Extruder Line(20-110)
PRODUCT DESCRIPTION
This Small caliber PE Pipe Extruder Line is mainly used to produce PE, PPR tube. It's widely used for cold and hot water supply, transportation of corrosive liquids.
PE,PPR tube making machine consists of: 1 sets of high efficiency single screw extruder, SJ25/25 single screw co-extruder for mark line, pipe co-extrusion die head, vacuum calibration tank, spray cooling water tank, ink jet printer, hual-off machine, free-dust cutter, stacker.
MAIN PARAMETERS:
MAIN PARAMETERS:
NoItemTechnical parameter
1ModelSJ-45SJ-65SJ-75
2Max. extruding capacity40 kg/h80-160kg/h180-300kg/h
3Main driving power15 kW37 -55kW55-90kW
4Filter changing wayDurable filterDurable filterDurable filter
5Heating power1 5 kW20 kW37 kW
6Sizing wayVacuum sizingVacuum sizingVacuum sizing
7Specification of pipe1 6-40 mm20-110mm63-200mm
8Cooling waySprayImmersionSprayImmersionSprayImmersion
9Hauling off wayRoller type tractorRoller type tractorRoller type /caterpillar typefor hard pipe
10Driving power of tractor2.2 kW3 kW4 kW
11Winding motor6 N.m6 N.m12 N.m
12Installation power40 kW50 kW85 kW
13Overall dimensionLWHSoft pipe12 m1.6 m2.6 m12.2 m1.6 m2.7 m15.8 m2.3 m2.8 m
Hard pipe15 m3 m2.6 m16.5 m3 m2.7 m21 m2.3 m2.8 m
PE Three Layer Pipe Making Machine
NoNameQuantity
1Single screw extruder2set
2Mark line extruder1set
3Die and Mould1set
4Vacuum sizing tank1set
5Spray cooling tank1set
6Haul-off machine1set
7Computer printer1set
8Cutter1set
9Stacker1set
10Automatic feeding machine1set
PRODUCT DESCRIPTION
This PE Three Layer Pi pe Making Machine is mainly used to produce multi-layers PE,PPR tube, such as 2 layers PPR tube, 3 layers PE,PPR fib erglass tube, 4 layers PE,PPR tube,etc. It's widely used for cold and hot water supply, transportation of corrosive liquids.
PE,PPR fiber tube making machine consists of: 2 or 3 sets of high efficiency single screw extruder, SJ25/25 single screw co-extruder for mark line, pipe co-extrusion die head, vacuum calibration tank, spray cooling water tank, ink jet printer, hual-off machine, free-dust cutter, stacker.
What is the details of PE,ppr three layer pipe automatic making machine?
1. pe three layer pipe automatic making machine is mainly used in the manufacture of the PPR PE,HDPE,LDPE and pipes with various tube diameters and wall thickness such as the agricultural and constructional plumbing, water supply and drain etc.
2. pe three layer pipe automatic making machine is consisted of single-screw extruder , vacuum calibrator , hauling machine ,cutter and tipping rack.
3. pe three layer pipe automatic making machine:. DN(mm):16mm-630mm Thickness: 2.0-57.2mm Standard: ISO9001,GB,DIN Working pressure: 0.6mpa-1.6mpa.
-
Pvc profile extrusion machine
Pvc profile extrusion machine can produce all kinds of profile, for example, window, door and door frame, pallet, cladding of outdoor wall, faciliry of ourside park, floor etc.
Output profile is wood plastic composite(wpc) or plastic upvc.
Wpc introduction:
As a new material to replace wood, wood plastic composite is widely used in fields of building decoration and outdoor building materials, such as edge and corner lines, fence of flowers nursery, skirting board, ceiling line, blind window, stair railing, decorative wall board, outdoor pavilion and so on. Most interior and exterior decorative building materials can be made by using wood plastic composite.
Particularly, wood plastic composite can be used in kitchen and washing room for its waterproof and fireproof functions which the raw wood does not have.
At present, wood plastic composite has already drawn extensive attention in the world and is praised as new material which will have boa rd developing prospect.
Materials:
Pvc/pp/pe + wood powder or pvc, pe, pp.
Main technical par ameters:
Typesy model 120 small profilesy model 240 small profilesy model 240 small profilesy model 240 small profile
Valid mold length of setting table /mm30004000400/50006000/8000
Max drawing force20304040
Crawler width/mm200240240240
Valid length of crawler /mm1600180022502400
Water consumption/ m3h-12.5456
Gas consumption /m3h-18101215
Total power/kw24.3272734.7
Appearance dimension
Mmmmmm15100860140013500104517601638514652127
17135146521271875014652130
1941014652130
-
Full Automatic Pvc Gravimetric Dosing System Application
Full Automatic PVC Gravimetric Dosing System is designed for automatic weighing and mixing PVC blends according to your formulation preset in computer, then conveying PVC blends into feeding hopper of extruder.
Our company with rich experience on Full Automatic PVC Gravimetric Dosing System for PVC pipes, PVC profiles and other PVC products factory.
We not only sell the system in China, but also export it to many countries such asIndia, Turkey, Iran and Russia etc..
PVC Wall Panel Line
Application
PART I. Introduction of PVC ceiling wall panel making machine production line
1. We are the most professional manufacturer of PVC ceiling making machinery in china, more than 50% china cities has our PVC ceiling panel making machine.
2. Normally the width of PVC ceiling panel is 200mm, 250mm, 300mm, 400mm, 600mm etc... To suggest you the most suitbale PVC ceiling machine, please tell us size of your panel first. It is important.
3. We can offer you turnke y solution of build a PVC ceiling panel factory.
PART II. THREE TYPES OF SURFACE TREATMENT FOR PVC CEILING PANEL:
1. Two color printing: Fi rst you will need an extra printing machine, and this printing machine work separately, you need first produce white color PVC ceiling panel, and then use the printing machine to get different design pattern PVC ceiling.
2. Lamination: Use glue to stick the design paper on the surface of PVC ceiling panel. It is connected with the PVC ceiling panel extrusion line.
3. Hot stamp print: Transfer design pattern from hot stamping foil to the surface of PVC ceiling tile. It is connected with the PVC ceiling panel production line.
PART III. PVC CEILING PANEL MANUFACTURING PROCESS:
STEP 1:
Raw material mixing according to the formula.
STEP 2:
Use PVC ceiling panel making machine and 3 kinds surface treatment to get product. you can use hot stamping or lamination or two color printing on the PVC ceiling panel surface to get diffferent design pattern.
STEP 3:
Bad product recycling. During the second step. normally it will occur some waste pruduct, so it will be necessary for you to recycle it.
PART IV. MODEL AND PARAMETERS OF PVC CEILING PANEL MACHINE:
Model51/11355/11065/132
Product width200mm-250mm200mm-500mm250mm-600mm
ExtruderSJSZ51/102SJSZ55/110SJSZ65/132
capicity per 24h>800m2>1200m2>1600m2
-
PVC Double Pipe Making Machine
MAIN PARAMETERS:
1. GF series plastic pipe production line is mainly used in manufacture of the plastic PVC pipes with diameters of 16-63mm, it can produce 2 pcs pvc pipes at same time, which greatly improved production efficiency.
2. pvc double pipe making machine, This line is composed of conical double-screw extruder, vacuum calibration table, haul-off, cutter, stacker etc.
3. The extruder and the haul-off adopt the quality AC frequency conversion control device.
4. The vacuum pump and motor adopt the famous brand.
5. It may choose the saw blade cutting type or the planet cutting production efficiency.
6. Our company may equipped the special device for the manufacture of the inner wall spiral coil and core layer blister according to the client s requirement.
No.production Qua ntity
1ZJF300 Plastic Pow der Charger1 set
2SJZ65/132 Conical Double-Screw Extruder1pc
3Diameter20-63 PVC Double Pipe Mould1set
4ZDX63 Double Pipe vacuum calibration Tank1pc
5YY-2 Double Pipe Ink printer1pc
6Double Pipe Haul-off and cuttiong machine Unit1pc
7DF63 Double Pipe Stacker1pc
-
PVC Four Pipe extrusion Machine
ADVANTANGES:
1. GF series plastic pipe production line is mainly used in manufacture of the plastic PVC pipes with diameters of 16-32mm, it can produce 4 pcs pvc pipes at same time, which greatly improved production efficiency.
2. This PVC Four Pipe Making Machine is composed of conical double-screw extruder, vacuum calibration table, haul-off, cutter, stacker etc.
3. The extruder and the haul-off adopt the quality AC frequency conversion control device.
4. The vacuum pump and motor adopt the famous brand.
5. It may choose the saw blade cutting type or the planet cutting production efficiency.
6. Our company may equipped the special device for the manufacture of the inner wall spiral coil and core layer blister according to the clients requirement.
MAIN PARAMETERS:
PVC Heating Mixer
SPECIFICATIONS:
1.used in plastic and rubber mixing,drying,color
2.lid is double sealed
3.Stainless steel blade
4.Elctric self-friction mixer
2014 GOOD QULITY SHR PVC HEATING MIXER/HIGH SPEED MIXING MACHINE/PLASTIC MIXER GRINDER:
1.The mixer used in plastics,rubber,daily chemical industry and laboratory materials mxied boxes,mixing,drying and cloring process.
2.The mixer Lid is double sealed for pvc heating mixer.
3.The mixer Spindle speed up to 3000 revolutions per minute, with electric heating, in order to achieve the best mixing effect
4.PVC heating mixer ca n mixing PVC flour And other plasticizer and other auxiliary materials, Raw material mixture can be directly into production line or other machine for production.
5. PVC heating m ixer dis charge method using two automatic temperature control and manual control.
6.stainless stell blades for the whole cast ,and throughdymamic and static balance test refind.
7. PVC heating mixer eletrical contorl components of famous brand.
MAIN TECHNICAL PARAMETERS:
PARAMETERSTOTAL
VOLUMN(L)AVALIABLE
VOLUMN(L)MOTORAND
HEATINGPOWER
(KW)MAINAXISSPEED
(RPM)HEATINGMODE
MODEL
SHR-10A10731440SELF-FRICTION
SHR-25A25185.51440SELF-FRICTION
SHR-50A50357/111440SELF-FRICTION
SHR-100A1007514/22/6650/1300ELECTRICTYHEATING
SHR-200A20015030/42/9475/950ELECTRICTYHEATING
SHR-300A30022540/55/9475/950ELECTRICTYHEATING
SHR-500A50037555/75/12430/860ELECTRICTYHEATING
SHR-800A80060083/110/15370/740ELECTRICTYHEATING
SHR-1000A1000750110/160/28325/650ELECTRICTYHEATING
-
PVC Pipe Line
DETAILS INTRODUCTION:
PVC pipe material production line is mainly used in the area of agricultural water supply system, architectural water supply system, pavement of cables, etc. as well as PVC pipe material of all sorts of pipe caliber and wall thickness.
This machine group consists mainly of twin conical (parallel) screws extruder, vacuum calibrating tank, haul-off unit, cutting unit, tilter, etc. single screw extruder and haul-off unit have applied imported A/C inverter, both vacuum pump and driving motor have applied excellent products.
The drawing machine includes two-claw type, three-claw type, four-claw type, six-claw type, eight-claw type, etc. Saw cutting or planet cutting can be applied, it is additionally applied with length measuring meter and thickness increasing device, the property of machine group is reliable, the production efficiency is high.
TECHNICAL PARAMETER (FYI):
SPECIFICATIONS FOR PVC PIPE PRODUCTION LINE
ModelPipe Diameter Range(mm)ExtrudersMax Output(kg/hr)Max Speed(m/min)Total Power
(KW)Line Length(m )
PVC-50X216-50SJSZ 51/ 10515066020
PVC-6316-63SJSZ55/11 13215066024
PVC-16063-160SJSZ65/132300510024
PVC-250110-250SJSZ80/1564003.512028
PVC-315160-315SJSZ80/156400316028
PVC-450250-450SJSZ92/1887001.520036
PVC-630315-630SJSZ92/1887000.923036
-
Material Automatic Feeding System
The conveying of the materials is the key to the automation of the compounding and feeding system. In the PVC automatic compounding system, the conveying system occupies a large proportion:Including the conveying from the bagging station to the transition silo upon the batching scales,the finished materials conveying from the mixer to the finished silo ,and also the finished materials conveying from the finished silo to the extruder.
There are two main forms of application here: spiral conveying and vacuum conveying.
The spiral conveying equipment composed with motor, reducer and the spiral. It has easy structure,work stable,but higher cost when the distance is long.
The vacuum conveying system is a kind of conveying equipment for conveying granule and powdery materials by vacuum suction. It is widely used in the fields of pharmaceutical, food, chemical, ceramics, feed, pigment, dye, agricultural products production and scientific research. The use of vacuum conveyors can reduce dust pollution in the workshop greatly, im prove cleanliness, improve production capacity significantly, and save a lot of labor, reduce pollution, safe and reliable.
THE POWDER VA CUUM SUCTION MACHINE HAS SUCH ADVANTAGES:
When harmful materials are not allowed to leak into the production line; when the material is sensitive to transport and can not be affected by the external impact, this is when you choose vacuum powder suction machine.
The entire transport process is done in a closed system without any powder leakage and contamination of the material. So that operators do not have to bear the physical handling, and enjoy a low noise of the working environment.
Vacuum conveyor is a pipeline closed transport, this transport can prevent dust pollution, improve the working environment, while reducing the environment and personnel pollution on the materials, improve cleanliness; because it is pipeline transportation, it takes smaller space, to complete the powder materials�?? delivery in a small and narrow space, so that the studio space will be beautiful and generous; especially not restricted by the long or short distance.At the same time, the vacuum feeder can reduce the labor intensity, improve work efficiency,which all make it as the first choice for most of the powder materials delivery.
THE PRINCIPLE OF THE VACUUM CONVEYOR FOR POWDER:
It can produce high vacuum by the compressed air through the vacuum generator,to convey the materials. It has a simpler structure, smaller size, maintenance-free, low noise, easy to control, eliminating the materials�?? static and meet the GMP requirements and etc. The high vacuum from the vacuum generator can avoid the stratification,to ensure the uniformity of the mixed materials. It is the preferred choice of extruder,mixer,packaging machines,crushers,vibrating sieve and others automatic feeding.
