We are supply Ultrasonic Testing Cable Connectors Like BNC (Q9), Lemo-1, Lemo 00 (Mini Lemo-C5
We are supply Microdot Connector for Ultrasonic Testing Cable RG174
Lemo, mini-lemo:
Circular connectors, also called "push-pull" or "quick connect/disconnect", are commonly used in non-destructive testing (ndt), physics, and aerospace, on transducers, flaw detectors, and other applications.
This style of connector was pioneered several decades ago by the swiss connector manufacturer lemo. Because of this history, practitioners in the industries that use this connector style still tend to call this a "lemo connector", even though there are now multiple manufacturers making compatible connectors. "lemo" is a registered trademark of lemo usa.
We source our connectors from multiple vendors. The connector we provide to you may be made by lemo, or may be a compatible model from an aftermarket manufacturer.
Our circular connectors come in two different sizes. The l00 connectors have a diameter of roughly 0.25", and are often used in physics and engineering applications for interconnection between nim/camac modules. If you are looking for the larger 0.5" diameter connector
We are engaged in manufacturing and supplying a wide range of Angle Probes that are used in various industries and organizations. These Equipment's are widely applicable in various areas for inspection of angle of sound beam. These Equipment's are available in various specifications. We trade these Equipment's in various parts of the country at competitive market prices.
Â
Salient characteristics are: Allow the sound beam to be introduced into the test material at an angle.
Plastic wedges of controlled geometry are attached to the transducer active element in order to establish the desired angle.
Wedges are precision engineered to produce a refracted shear wave within the test object at specific angles, as indicated on the wedge or transducer housing.
Specification"
Size:8x9, 20x22,14x14mm,
Frequency:2Mhz, 4Mhz,
We supply Lemo to Microdot Cable for Ultrasonic Testing Cable between Probe and Flaw Detector, RG174 Cable with two meter standard Length
For calibrating ultrasonic flaw detection equipment in both laboratory and on-site conditions. Our version of this block includes a 100mm radius, 3.0mm and 50.0mm holes, engraved reference mark scales, slots at the zero point which provide calibrating signals at intervals of 100mm range. In accordance with EN 12223 and ISO 2400.
Dimensions: 25.0 mm x 100.0 mm x 300.0 mm 100mm radius, 1.5mm dia hole, 6.0mm deepx2.0 mm wide slot, and 25.0 mm radiused slot x 1.5 mm deep x 3.0mm wide.
V2-Calibration Block 12.5/20/25mm 1018 Steel Geometry:25mm and 50 mm radius, 5.0/1.5mm hole, engraved reference mark scales from 35 to 75 degrees.
Dimensions: 75mm x 43mm x 12.5mm. 12.5mm thick small calibration block for on-site checking of miniature shear wave probe index, time base, beam angle and gain. In accordance with EN 27963, DIN 54-120, and ISO 7963.
Step-Wedge block is used for thickness and linearity calibration. It can be available in 3 different materials
Geometry: 4,5&10 Step- Wedge Calibration Block is a Special step block for thickness and linearity calibration. it goes from 1.0mm to 10.0mm (10step), 6.25 to 25mm(4step),2.5 to 12.5(5step), Blocks can be available in 3different types of materials(Carbon Steel, Aluminum and Stainless Steel)
AWS type RC block is used for checking Resolution Capablities of angle beam transducers. It can be available in 3 different materials(Aluminium,Carbon Steel and Stainless Steel).
Geometry: 1 " x 3" x 6". Contains nine 0.062" diameter holes for 45, 60 and 70 degree transducers. Dimensions: 6.000" x 3" x 1.000"(152.4mm x 76.2mm x 25.4 mm)
AWS-type DS block used for Shearwave Distance Sensitivity Calibration. It can be available in 3 different materials(Aluminium,Carbon Steel and Stainless Steel),AWS-type block used for longitudinal distance and sensitivity calibration. Contains a 2.0" high section between two 4.0" sections. In accordance with AWS requirements..
Dimensions: 6.000" x 4.000" x 2.000" (152.4 mm x 101.6 mm x 50.8 mm)
AWS does not specify a separate metric version of the DS block. The metric block in AWS shows only the metric equivalents to the standard design. Therefore, this one block can be used for both inch and metric requirements.
DSC Block 1018 Carbon Steel (Metric Version) AWS type DSC Block Distance, sensitivity, refracted angle and beam index calibration for angle beam transducers, per AWS and ASHTO requirements.
Geometry: 1 " thick, 4" long with 1" and 3" radius. Contains 3/8" deep x 1/32" radius notch and a 1/8" diameter side drilled hole for 45, 60 and 70 degree probes.
Application: Calibration of transverse and longitudinal wave distance, setting determination of the sound beam point of incidence, angle of propagation and
AWS-type block used for shear wave sensitivity calibration. Contains two .062 diameter through holes. In accordance with ASTM E164 and BRR/AWS requirements. Dimensions: 3.00 x 1.25 x .905. Metric version available.
We offer Various Calibration Blocks for measuring specification of various metallic and non metallic tools under various parameters and are available in various specifications that meets International Quality Standards that are used for various kinds of engineering applications. We manufacture these Calibration Blocks using extreme quality raw material that is procured from our reliable and trusted vendors.
We Manufacture Ultrasonic Calibration Blocks like IIW Type 1, V1/5(A2), V2-IIW2(A4), DC, DSC, DS, RC,IOW-A5, Step-wedge Block, IOW Beam Profile, ASTME317, ASTM Area Amplitude, SC Etc.
We offer Comprehensive high-quality precision Weld Measuring Gauges for checking Weld Thickness, Butt Welds, Pits, Undercuts, and much more. Our All Welding Inspection Gauges are made with Stainless steel with Sturdy, High Accuracy and Portable supply with case with instruction Manual.
We offer Welding Inspection Gauge:
Bridge Cam Gauge
Fillet Weld Gauge
HI-LO Weld gauge
Taper Gauge
V-Wac Weld Gauge
Digital Weld Gauge
Skew-T-Fillet Weld Gauge
Easton Weld Gauge
