Function and application introduction
Can help you to save about 12 workers and increase 50% your production capacity. This machine is the specialized equipment for handling a complex printed sheet that printed several different designs or combinations of card. This machine provides cutting, collating and separating the different design cards automatically. Such as a sheet printed 5x5 up (also 3x8, 6x8..Etc) ups format card sheet 25 (24, 48 pcs) different card designs will be cut and separated to a 5 or 25 groups by the 25 (24, 48) chambers card collating system automatically, operator doesnâ??t need to separate or group card again, in order to increase the production rate, save labor cost, reduce scrape and scrap.
Of course we can tailor-make and design the automatic collecting system according your special request, such as 3x8 ups, 6x8 ups format of card sheet, etc.
Technical parameter:
Modelcnj-5a -25plc punching machine
Power ac 380v 50/60 hz 5.5kw
Air pressure6kg /cm square
Layout 5x5
Applicable materialspvc, abs, pet, mixed material of pvc and abs paper cards
Production capacity18000 cards/hour
Card separation5, 25
Control methodplc program + servo system
Operator1 person
Weight1200kg approx
Overall dimensionl3000 x w1240 x h 1750mm
Product instruction:
CNJ-2APLC high speed automatic PLC punch machine,it adopts PLC control system.Feeding system is controlled by Omron servomotor and imported high precision ball screw as well as linear guide,balanced move and precision moving distance(positioning accuracy is less than 0.10mm).It adopts professional ultrasensitive opto-electrical recognizer to read the register marks to make the position reliable and precise,also low noise�large flow made in Taiwan hydraulic pump.The die of hydraulic cylinder is dieing smoothly and steady,also low noise.The mould is made by imported die steel.The software function is strong and insure punch precision even in the situation of material distortion or mechanism worn.The punch capacity is 30% higher than the similar products.It adopts two moulds to punch,so it is suitable for the medium range card making factories.
Advantage:
1,PLC controlled MMI(man-machine interface)
2,Reliable and precise position by opto-electrical recognizer to read the register marks in the cutting sheet.
3,Adopt the imported die steel to make puncher mould to cut the high-quality and smooth edge cards.
Technical parameter:
Model,CNJ-2APLC
Suitable for ,0.3~1.0mm PVC and other plastic materials
Punch layout ,25,A4 Size
The number of punches ,2
Control method,PLC control
Max punch strength ,0~5000 kgs adjustable
Cylinder stroke,18mm
Hydraulic oil tank volume,120liter
Air source,0.6 MPa
Air consumption ,100 L/min
Power source ,AC380V 50/60Hz
Power,4.5kW
Production capacity,5000 cards/hour
Size,L1350W600H1300mm
Weight,600 kgs
Function and application introduction
This model of punch machine is controlled through plc from mitsubishi/omron of japan and adopts the interface of man-machine of lc industry touch screen of color dstn, weinview mt508s 7.7" from taiwan.The material feed system adopts the servomotor of mitsubishi/omron and high precision ball screw as well as plane guide imported from japan. It moves smoothly, the move distance is accurate. It uses the high sensitive photoelectric recognizers from takex of japan to read the position marks. Positioning is accurate and reliable. The hydraulic pump from taiwan is low noise, large flow. The hydraulic valves from yuken of japan and american sealing are long life for using. The die of hydraulic cylinder is dieing smoothly and steady, low noise. The mould is made by imported mould steel. The software function is strong, you can set 8 cards to the different step of distance, and ensure punching precision even in the situation of material distortion or mechanism worn. Punching speed is 30% higher than similar products.
Technical parameter:
Suitable for0.3~1.0mm pvc and other plastic materials
Punch layout 3x7, 3x8, 4x7, 4x8, 5x5
The number of punches 3/4/5
Max punch strength 0~5000 kg adjustable
Cylinder travel 18mm
Hydraulic oil tank volume120liter
Air source0.6 mpa
Air consumption 50 l/min
Power source ac380v 50/60hz
Power4.5kw
Max.Speed2000-20000cards/hour
Dimension l1850w870h1850mm
Weight appr.1000 kg
Product Introduction:
CNJ-HS-2B Dual-card Punching Machine combines slotting and punching. It adopts hydraulic power punching method .It adopts photoelectric eye center location to accurate positioning with fast speed. It uses imported good quality mold, which is easy to be
replaced. The machine is for punching A4 size PVC, ABS and etc. Punching effect is comparable with automatic high-speed die punch card. Punching is done after making holes without cutting.
Technical Parameter:
Model,CNJ-HS-2B punching machine
Punching size,International credit card standard size 85.754mm
Card material size,210 mm297 mm
Punching thickness,0.3 mm1.2mm
Punching method,Hydraulic
Punching motion,Constant
Voltage,220V
Power supply,220VAC 50HZ
Power,2.2KW
Dimension,850 410 1150 mm
G.W,275kg
Productivity ,3000 cards / Hour
This machine breaks with traditional designs and realizes automatic material transfer instead of manual transfer, achieving safe and high efficiency working.
Plc industrial automation control system & touch- screen display are imported, convenient for operation;
With its powerful functions, the software can save several lamination parameters automatically.
Trouble alarm and record functions make the machine more humanized.
Both heating and cooling tower are made of aluminum alloy, realizing fast heating & cooling functions with non-rusty.
The luxury energy saving model with whole sealing design for heating insulation saves energy.
The machine with 7 working daylights improved 20%efficiency compared to similar products.
With automatic frequency conversion function, high quality imported vfd matched with variable fluid technique, the precision up to â±0.1mpa
With automatic moving type of transfer, materials can be transferred easily and automatically.
Â?� with special laminated trays
Model cnj-au5200a materials auto transfer laminator
Cooling method water cooling
Heating method electric heating
Pressure stages heating 12 stages/cooling 5 stages
Pressure precision 0.1 mpa
Temperature precision 0-200
Laminating plate smoothness 0.05mm
Laminating plate aluminum alloy
Hydraulic cylinder single/four
Pressure 0-16mpa
Laminating platen size 420mm550mm
Opening 7
Opening space 50mm
Laminating plate thickness 45mm
Electric 380v , 50/60hz, 26 kw
Dimension l2650mmw1100mmh1950mm
Weight 3000 kgs
Output around 9, 000 cards/hour
Product introduction
The CNJ-A4 Water & Air laminator which is developed by CNJACKY Company is a highly efficient and intelligent PVC card making laminator. The temperature is controlled by the digital meter, which automatically carries on all the processes of heating, keeping a stable temperature , cooling. When the procedure is over, it will sound out a warning. The laminator is cooled by both air and water.You can add pressure directly through the handle wheel.
The machine is marvelous with a fine-looking appearance,stable performance, simple operation,advanced designing, reliable quality. High-quality heating and cooling elements make both heating up and cooling down well distributed,which avoids the wastes caused by excessive temperature differential because of the slow heating up and cool cast iron elements. Now it can laminate Non-contact IC & ID cards.
Lamination Area:210*297mm*mm
Pressing Method:with handle wheel
Cooling Method:water cooling and air cooling
Layers: 1~10sheet
Room temperature~180C
Voltage:220V
Power:220VAC 50Hz
Efficience:>400cards/h
Net Weight: 120kg
Size: 750mm*470mm*750mm
Product introduction
The cnj-a6 air laminator which is developed by cnjacky company is a highly efficient and intelligent pvc card making laminator.The temperature is controlled by the digital meter, which automatically carries on all the processes of heating, keeping a stable temperature , cooling. When the procedure is over, it will sound out a warning.The laminator is cooled by air.You can add pressure directly through the handle wheel. The machine is marvelous with a fine-looking appearance, stable performance, simple operation, advanced designing, reliable quality. High-quality heating and cooling elements make both heating up and cooling down well distributed, which avoids the wastes caused by excessive temperature differential because of the slow heating up and cool cast iron elements. Now it can laminate non-contact ic & id cards.
Lamination area:100x120mm*mm
Pressing method:with handle wheel
Cooling method:water air cooling
Layers: 1~10sheet
Room temperature: 0~180,
Voltage:220v
Power:220vac 50hz
Efficience:>150cards/h
Gross weight: 25kg
Size: 400250400 mm
Product introduction
It is a highly efficient, intelligent and fully automatic PVC card making laminator. You needn't do any other operation when it's working.
The automatic pressure mode is employed on this laminator.The temperature is controlled by the digital meter. The high-quality heating
and cooling elements make both calefaction and refrigeration well distributed at a proper speed,which avoids the wastes caused by
excessive temperature difference because of the slow heating up and cooling down cast iron. The water and air cooling mode accounts
for its fast card making speed and good cooling effect.elements. The machine is marvelous with a fine-looking appearance, stable performance,simple operation,advanced design and reliable quality, which is fit for making various kinds of PVC cards, non-contact IC and ID cards.
Technological Parameter:
Laminate area,210x297mm
Laminate layers,1-10 layers
Control bound of temperature,0-180
Cooling method,Water and air
Rated pressure,7 Mpa
Working pressure,4.5Mpa
Voltage,220V
Power supply,220V AC 50HZ
Net weight,210Kgs
Productivity,>600sheets/hour
Size,800mm610mm1170mm
Product introduction,
It is professional for laminating smart cards, aluminum laminating plate, changeable frequence hydraulic pressing, 4 hydraulic cylinders muti-steps of pressure, temperature controlling module , PLC controlling .
Parameter
Working pressure ,18MPa
Power,3phases AC380V 50Hz
Sum power, 30KW
Laminating towers,2 ,hot pressing,5,cold pressing,5,
Controlling method,PLC
Laminating size,420mm520mm
Weight,2500kg
Size,2500mm(L)1400(W)1700mm(H)
Product introduction,
It is professional for laminating smart cards, aluminum laminating plate, changeable frequence hydraulic pressing, 4 hydraulic cylinders muti-steps of pressure, temperature controlling module , PLC controlling .
Parameter
Working pressure ,18MPa
Power,3phases AC380V 50Hz
Sum power, 30KW
Laminating towers,2 ,hot pressing,5,cold pressing,5,
Controlling method,PLC
Laminating size,420mm520mm
Weight,2500kg
Size,2500mm(L)1400(W)1700mm(H)
Function and Application Introduction
The machine is operated on touch screen friendly human-machine, servo system as punching motivity to get high speed and high efficiency. High sensitivity optical fiber sensor support two sets of stepping system to achieve length-ways searching location, also can get the two-direction positioning of X, Y in the same surface. The punching precision will not be affected by
the dimension of the material, to make the position precision less than ±0.1mm.Each punching location can ensure the punching precision.
Feature
1. High sensitivity optical fiber sensor support the imported servo feeding system, the position parameter of the punching spot can be adjusted, with high precision.
2. Adopt imported ball screw-lead stepping to feeding, high precision and long using life.
3. Adopt servo motor as punching motivity, with low noise and stable motivity, the punching speed can be adjusted, the effect will be much better if punch the cards with different thickness.
4. Controlled by PLC and running automatically, the machine will alarm and halt if case of errors, also provide solutions to solve the errors.
5. With two working mode: location card and blank card, punching mode is flexible and practical.
Main Technical Parameter
PowerAC 380V/50HZ Available materialPVABSPETPETGpaper cardmixed material
Total Powerï3.5KWAvailabe sheetï3X84X85X5 etcAs per customer design
Air sourceï6kg/cã?¡ Outputï7000ï16000PCS/hourMore punching heads, higher output)
Air consumptionïAbout 70L/min Control wayïPLC program+servo system
weightï850kg Operatorï1 person
