Technical Specification
Materials: Carbon Steel, Alloy Steel & Stainless Steel
Class: Class 5,Class 6,Class 8,Class 10
Finish: White Zinc Plated, Yellow Zinc Plated, Auto Black Plated,Chrome Plated & other as per customer requirement
Features
High Grade Raw Material
Dimensionally Accurate
Corrosion & Abrasion Resistant
PPAP Requirements
Technical Specification
U Bolts of standard size are essentially a single piece of mild or stainless steel bar that is threaded at the end of either side and then shaped as the letter U. U Bolt Dimensions range from M6 to M20 in terms of thread diameter, with various lengths and specials also available.
Features
A U-bolt is a bolt in the shape of the letter U with screw threads on both ends.
...
U-bolt
Material type (for example: bright zinc-plated mild steel)
Thread dimensions (for example: M12 * 50 mm)
Inside diameter (for example: 50 mm - the distance between the legs)
Inside height (for example: 120 mm)
Technical Specification
- Size: M4 to M100
- Length: upto 5 metres
- Grade: SS 304, SS 316
- Material: Carbon steel, Stainless steel
- Surface finish: Plain, Hot dip galvanized, Zinc plated
Features
We have marked a reputed position in the market by providing a high quality range of Stainless Steel J Bolt. Features: High durability. Dimensional accuracy.
...
Finishes of J Anchor Bolt:
Plain.
Black.
Zinc Plated.
Hot Dip Galvanized
Technical Specification
Materials: Carbon Steel, Alloy Steel & Stainless Steel
Class: Class 5,Class 6,Class 8,Class 10
Finish: White Zinc Plated, Yellow Zinc Plated, Auto Black Plated,Chrome Plated & other as per customer requirement
Features
High Grade Raw Material
Dimensionally Accurate
Corrosion & Abrasion Resistant
PPAP Requirements
Technical Specification
Materials: Carbon Steel, Alloy Steel & Stainless Steel
Class: Class 5,Class 6,Class 8,Class 10
Finish: White Zinc Plated, Yellow Zinc Plated, Auto Black Plated,Chrome Plated & other as per customer requirement
Features
High Grade Raw Material
Dimensionally Accurate
Corrosion & Abrasion Resistant
PPAP Requirements
Technical Specification
Flange bolts are partially and fully threaded depending on size and length. The point for hex types is chamfered or rounded; for 12 point, it's flat and chamfered. Typical sizes for hex range from 3/8" to 3/4"; #10 to 1/2" for serrated hex; and 1/4" to 1" in diameter for 12 point.
Features
Hex Flange Bolt features a ridge around its head to distribute clamping load during the tightening process. The main reason for using this bolt is to protect joint surfaces of wood & metal from impacts and load.
Standards
DIN 6921
Features
Square Head Bolts are similar to Hex Cap screws but have a 4-sided square head instead of a 6-sided hexagonal head. The square head enables an easier wrench grip for tightening and a larger bearing area for gripping. They are commonly referred to as both bolts and screws and are designed to be driven with a wrench.
Standards
DIN 479
Technical Specification
Length:
24MM
Thread Size:
M12 X 1.75MM
Size:
M12 X 1.75 X 24 CL12.9
Box Size:
D
OEM Codes:
# 143 229
Technical Specification
ASTM A193 Grade B7 Chromium Molybendum steel, normally AISI 4140, heat treated to 28-32Rockwell Hardness, 125,000 PSI tensile strength, 105, 000 PSI yield. It will hold it's strength to 1000 degrees F. This grade of studbolts are engineered to mate with ASTM A194 Grade 2H Heavy Hex Nuts.
Features
ASTM A193 B7 bolts are built to the requirements of numerous specifications and material design properties. To be more specific, B7 alloy steel is a high temperature grade of A-193. B7 steel is also a chrome moly steel with a minimum tensile strength of 125ksi.
HEX BOLT FULL THREAD- METRIC
Technical Specification
Materials: Carbon Steel, Alloy Steel & Stainless Steel
Class: Class 5,Class 6,Class 8,Class 10
Finish: White Zinc Plated, Yellow Zinc Plated, Auto Black Plated,Chrome Plated & other as per customer requirement
Features
High Grade Raw Material
Dimensionally Accurate
Corrosion & Abrasion Resistant
PPAP Requirements
Technical Specification
Materials: Carbon Steel, Alloy Steel & Stainless Steel
Class: Class 5,Class 6,Class 8,Class 10
Finish: White Zinc Plated, Yellow Zinc Plated, Auto Black Plated,Chrome Plated & other as per customer requirement
Features
High Grade Raw Material
Dimensionally Accurate
Corrosion & Abrasion Resistant
PPAP Requirements
Technical Specification
Materials: Carbon Steel, Alloy Steel & Stainless Steel
Class: Class 5,Class 6,Class 8,Class 10
Finish: White Zinc Plated, Yellow Zinc Plated, Auto Black Plated,Chrome Plated & other as per customer requirement
Features
High Grade Raw Material
Dimensionally Accurate
Corrosion & Abrasion Resistant
PPAP Requirements
Technical Specification
ypically, machine bolt sizes range from 1/4" to 1 1/4" for square heads and 3/8" to 1 3/4" in diameter for hex heads, and lengths span from about 3/4" to 18" for square and 6 1/2" to 24" for hex heads. Measure length from under the head to the threaded end of the bolt. Both square and hex heads are available.
Features
- Enhanced durability.
- Flawless finish
- Easy installation
Technical Specification
The latest technology used in construction of buildings and bridges. They are used as a major element in the composite structure. Excellent quality, high load bearing capacity, durability, faster speed of construction, etc. are some of the reasons why it is gaining popularity in the construction industry.
Shear connector means headed steel studs. These are welded to a structural member for achieving composite action with concrete. Shear connector is one of the major elements in the composite structure.
Features
Installation and welding process is quick and simple;
Provides little obstruction to the slab reinforcement;
Allows more satisfactory compaction of the concreate around the connectors;
It provides equal shear strength in all directions.
Technical Specification
Threaded Rod ASTM 193 SS 304/304L, Stainless Steel ASTM 193 316L/316H/316Ti Threaded Rod Stud, Threaded Rod Stud SS 317/317L, Carbon Steel B7/B7M Threaded Rod Stud, Duplex Steel S31803/S32205 Threaded Rod Stud, Incoloy 800/800H/800HT Threaded Rod Stud, Inconel 600/601 Threaded Rod Stud, Monel 400/K500 Threaded Rod Stud manufacturer, Hastelloy B2/B3/C22 Threaded Rod Stud
DIN 982
DIN 985
Technical Specification
Materials: Carbon Steel, Alloy Steel & Stainless Steel
Class: Class 5,Class 6,Class 8,Class 10
Finish: White Zinc Plated, Yellow Zinc Plated, Auto Black Plated,Chrome Plated & other as per customer requirement
Features
High Grade Raw Material
Dimensionally Accurate
Corrosion & Abrasion Resistant
PPAP Requirements
ANSI STANDARD
Technical Specification
Materials: Carbon Steel, Alloy Steel & Stainless Steel
Class: Class 5,Class 6,Class 8,Class 10
Finish: White Zinc Plated, Yellow Zinc Plated, Auto Black Plated,Chrome Plated & other as per customer requirement
Features
High Grade Raw Material
Dimensionally Accurate
Corrosion & Abrasion Resistant
PPAP Requirements
BS STANDARD
Technical Specification
Materials: Carbon Steel, Alloy Steel & Stainless Steel
Class: Class 5,Class 6,Class 8,Class 10
Finish: White Zinc Plated, Yellow Zinc Plated, Auto Black Plated,Chrome Plated & other as per customer requirement
Features
High Grade Raw Material
Dimensionally Accurate
Corrosion & Abrasion Resistant
PPAP Requirements
Tee Slot Nut
Features
Cold drawn T-nut features unique undercut to prevent interference from T-slot burrs. Stud stays perpendicular to the table. Bottom chamfer (approximately 60 off horizontal) clears chips for easy insertion. Threads are roll formed for more holding power and last thread is incomplete to prevent T-slot or table damage.
Flange Nuts
DIN 6923 SARRETED
Standards
DIN 6923
NYLOCK NUTS - SS304(A2-70)-DIN 982
Technical Specification
Materials: Carbon Steel, Alloy Steel & Stainless Steel
Class: Class 5,Class 6,Class 8,Class 10
Finish: White Zinc Plated, Yellow Zinc Plated, Auto Black Plated,Chrome Plated & other as per customer requirement
Features
High Grade Raw Material
Dimensionally Accurate
Corrosion & Abrasion Resistant
PPAP Requirements
DOME NUTS
Technical Specification
Materials: Crabon Steel, Alloy Steel,& Stainless Steel
Class: Class 6,Class 8,Class 10,Class 12
Size: M5 to M30 (in cold forging), 3/16\\\\\\\\\\\\\\\" to 1\\\\\\\\\\\\\\\" (in cold forging)
Finish: Plain, White Zinc Plated
Features
High Grade Raw Material
Dimensionally Accurate
Corrosion & Abrasion Resistant
PPAP Requirements
Tee Nuts
FLAT HEAD KNURLED BODY
Technical Specification
Materials: Carbon Steel, Alloy Steel & Stainless Steel
Class: Class 5,Class 6,Class 8,Class 10
Finish: White Zinc Plated, Yellow Zinc Plated, Auto Black Plated,Chrome Plated & other as per customer requirement
Features
High Grade Raw Material
Dimensionally Accurate
Corrosion & Abrasion Resistant
PPAP Requirements
REDUCED HEAD KNURLED BODY
Technical Specification
Materials: Carbon Steel, Alloy Steel & Stainless Steel
Class: Class 5,Class 6,Class 8,Class 10
Finish: White Zinc Plated, Yellow Zinc Plated, Auto Black Plated,Chrome Plated & other as per customer requirement
Features
High Grade Raw Material
Dimensionally Accurate
Corrosion & Abrasion Resistant
PPAP Requirements
FLAT HD HALF HEX BODY
Technical Specification
Materials: Carbon Steel, Alloy Steel & Stainless Steel
Class: Class 5,Class 6,Class 8,Class 10
Finish: White Zinc Plated, Yellow Zinc Plated, Auto Black Plated,Chrome Plated & other as per customer requirement
Features
High Grade Raw Material
Dimensionally Accurate
Corrosion & Abrasion Resistant
PPAP Requirements
INCH SERIES
Technical Specification
Materials: Carbon Steel, Alloy Steel & Stainless Steel
Class: Class 5,Class 6,Class 8,Class 10
Finish: White Zinc Plated, Yellow Zinc Plated, Auto Black Plated,Chrome Plated & other as per customer requirement
Features
High Grade Raw Material
Dimensionally Accurate
Corrosion & Abrasion Resistant
PPAP Requirements
Flange Nuts
DIN 6923-PlAIN
Technical Specification
Materials: Low Carbon Steel, Alloy Steel & Stainless Steel(18-8, A2-70)
Size: M3 to M20
Finish : White/Blue/Yellow Zinc Plated
Features
High Grade Raw Material
Dimensionally Accurate
Corrosion & Abrasion Resistant
PPAP Requirements
FLANGE NUTS
DIN 6923-YZP
Technical Specification
Materials: Low Carbon Steel, Alloy Steel & Stainless Steel(18-8, A2-70)
Size: M3 to M20
Grade: Class 5,Class 6, Class 8, Class A2
Finish : White/Blue/Yellow Zinc Plated
Features
High Grade Raw Material
Dimensionally Accurate
Corrosion & Abrasion Resistant
PPAP Requirements
Flange Nylock Nuts
REDUCED HEAD KNURLED BODY
Technical Specification
Materials: Carbon Steel, Alloy Steel & Stainless Steel
Class: Class 5,Class 6,Class 8,Class 10
Finish: White Zinc Plated, Yellow Zinc Plated, Auto Black Plated,Chrome Plated & other as per customer requirement
Features
High Grade Raw Material
Dimensionally Accurate
Corrosion & Abrasion Resistant
PPAP Requirements
DIN 315
Technical Specification
Materials: Carbon Steel, Alloy Steel & Stainless Steel
Class: Class 5,Class 6,Class 8,Class 10
Finish: White Zinc Plated, Yellow Zinc Plated, Auto Black Plated,Chrome Plated & other as per customer requirement
Features
High Grade Raw Material
Dimensionally Accurate
Corrosion & Abrasion Resistant
PPAP Requirements
ISO 4032 - Black (Class 8)
Technical Specification
Materials: Crabon Steel, Alloy Steel,& Stainless Steel
Class: Class 6,Class 8,Class 10,Class 12
Size: M5 to M30 (in cold forging), 3/16" to 1" (in cold forging)
Finish: Plain, White Zinc Plated
Features
High Grade Raw Material
Dimensionally Accurate
Corrosion & Abrasion Resistant
PPAP Requirements
SQUARE WELD NUTS (PLAIN)
Technical Specification
Materials: Carbon Steel, Alloy Steel & Stainless Steel
Class: Class 5,Class 6,Class 8,Class 10
Finish: White Zinc Plated, Yellow Zinc Plated, Auto Black Plated,Chrome Plated & other as per customer requirement
Features
High Grade Raw Material
Dimensionally Accurate
Corrosion & Abrasion Resistant
PPAP Requirements
Pan Head
Truss Head
Technical Specification
High Grade Raw Material
Dimensionally Accurate
Corrosion & Abrasion Resistant
PPAP Requirements
Features
Materials: Low Carbon Steel, Alloy Steel & Stainless Steel(18-8, A2-70)
Grade: Class 5,Class 6, Class 8, Class A2
Finish : White/Blue/Yellow Zinc Plated
ACME THREADED ROD
Technical Specification
Specifications of acme threaded rods include 1/2-10 ft. to 2-4 ft. dia., 12 ft. length, 0.375 to 2.250 maximum flange dia., 0.365 to 2.224 flange dia., 0.058 to 0.433 flange thickness & 1.000 to 3.5000 thread length. Acme threaded rods are made from stainless & carbon steel materials with plain finish.
Features
Specifications of acme threaded rods include 1/2-10 ft. to 2-4 ft. dia., 12 ft. length, 0.375 to 2.250 maximum flange dia., 0.365 to 2.224 flange dia., 0.058 to 0.433 flange thickness & 1.000 to 3.5000 thread length. Acme threaded rods are made from stainless & carbon steel materials with plain finish.
Drywall Screw
Threaded Rod 4.6/5.8
Features
Also known simply as a stud, a threaded rod is a metal fastener typically made of stainless steel that's characterized by the presence of threading on both ends. ... Regardless, all threaded rods feature threading on both ends, making it particularly useful in applications where tension is applied
Technical Specification
Rods that meet this specification are either made from AISI 4140 or 4142. Diameter range from 1/4 up through 2 1/2,, they must meet minimum yield strength of 105 KSI, and minimum tensile strength of 125 KSI.
Features
Features of these ASTM A193 Grade B7 Threaded Rods are: Durable, Long functional life, Reliable performance, and so on. In addition, our ASTM A193 Grade B7 Threaded Rods are as well being offered in different sizes and shapes to our respected clienteles.
Technical Specification
High-tensile 8.8 allthread is available in 1 and/or 3 meter lengths. See below Order Here tab to select diameters and view pricing.
metric coarse thread
hot dipped galvanised
Features
High-tensile 8.8 allthread is available in 1 and/or 3 meter lengths. See below Order Here tab to select diameters and view pricing.
metric coarse thread
hot dipped galvanised
Technical Specification
Materials: Low Carbon Steel, Alloy Steel & Stainless Steel(18-8, A2-70)
Grade: Class 5,Class 6, Class 8, Class A2
Finish : White/Blue/Yellow Zinc Plated
Features
High Grade Raw Material
Dimensionally Accurate
Corrosion & Abrasion Resistant
PPAP Requirements
Socket Set Screws 45h (cup Point - Knurled) Din 916
Technical Specification
Materials: Carbon Steel, Alloy Steel & Stainless Steel
Class: Class 5,Class 6,Class 8,Class 10
Finish: White Zinc Plated, Yellow Zinc Plated, Auto Black Plated,Chrome Plated & other as per customer requirement
Features
High Grade Raw Material
Dimensionally Accurate
Corrosion & Abrasion Resistant
PPAP Requirements
Hex Flange Head Self Drilling Screws With Epdm Washer
CSK/FLAT HEAD SELF DRILLING SCREW
Technical Specification
Materials: Carbon Steel, Alloy Steel & Stainless Steel
Class: Class 5,Class 6,Class 8,Class 10
Finish: White Zinc Plated, Yellow Zinc Plated, Auto Black Plated,Chrome Plated & other as per customer requirement
Features
High Grade Raw Material
Dimensionally Accurate
Corrosion & Abrasion Resistant
PPAP Requirements
Drywall Screw
DIN 976B Stud
Socket Head Cap Screws (allen Bolts) Din 912
Technical Specification
Materials: Carbon Steel, Alloy Steel & Stainless Steel
Class: Class 5,Class 6,Class 8,Class 10
Finish: White Zinc Plated, Yellow Zinc Plated, Auto Black Plated,Chrome Plated & other as per customer requirement
Features
High Grade Raw Material
Dimensionally Accurate
Corrosion & Abrasion Resistant
PPAP Requirements
Technical Specification
Materials: Carbon Steel, Alloy Steel & Stainless Steel
Class: Class 5,Class 6,Class 8,Class 10
Finish: White Zinc Plated, Yellow Zinc Plated, Auto Black Plated,Chrome Plated & other as per customer requirement
Features
High Grade Raw Material
Dimensionally Accurate
Corrosion & Abrasion Resistant
PPAP Requirements
Technical Specification
Materials: Carbon Steel, Alloy Steel & Stainless Steel
Class: Class 5,Class 6,Class 8,Class 10
Finish: White Zinc Plated, Yellow Zinc Plated, Auto Black Plated,Chrome Plated & other as per customer requirement
Features
High Grade Raw Material
Dimensionally Accurate
Corrosion & Abrasion Resistant
PPAP Requirements
As Per Bs-1802 - Flat Section
HSFG Washer
Technical Specification
SIZE : M16 M20 M22 M24 M30
Features
lso, our provided Hsfg Washers are highly recognized among clients due to their crack proof nature, corrosion resistant finish and other features. Moreover, these high strength friction grip washers are available in black color, round shape and various dimensions to suit end customer's needs.
DTI Washer
AS PER IS-3063 DIN 127 B- FLAT SECTION
Technical Specification
High Grade Raw Material
Dimensionally Accurate
Corrosion & Abrasion Resistant
PPAP Requirements
Features
Materials: Carbon Steel, Alloy Steel & Stainless Steel
Class: Class 5,Class 6,Class 8,Class 10
Finish: White Zinc Plated, Yellow Zinc Plated, Auto Black Plated,Chrome Plated & other as per customer requirement
AS PER BS-1802 - SQUARE SECTION
Technical Specification
Materials: Low Carbon Steel, Alloy Steel & Stainless Steel(18-8, A2-70)
Size: M3 to M20
Finish : White/Blue/Yellow Zinc Plated
Features
High Grade Raw Material
Dimensionally Accurate
Corrosion & Abrasion Resistant
PPAP Requirements
Plain Washer
Features
A flat annulus or ring, often of metal, used to spread the load of a screwed fastening. Additionally, a plain washer may be used when the hole is a larger diameter than the fixing nut. A flat washer with a particularly large outer diameter in proportion to its central hole.
SQUARE WASHER
Technical Specification
Square Washers, Dimension/size: Standard. Can be offer as both Metric & Imperial Inch sizes with PTFE, XYLAN, ZINC, TEFLON, HOT DIPPED GALVANIZING etc. Size Range: M1 upto M100 & 0.0393\\\" upto 4\\\" with Customization. Fill the quantity to get latest price!
Features
A washer is a thin plate (typically disk-shaped, but sometimes square) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such as a bolt or nut. ... Washers often have an outer diameter (OD) about twice their inner diameter (ID), but this can vary quite widely.
Features:
- Dimensional accuracy
- Corrosion resistance
- Fine finish
AS PER IS-6735 DIN 7980 - SQUARE SECTION
Technical Specification
Materials: Carbon Steel, Alloy Steel & Stainless Steel
Class: Class 5,Class 6,Class 8,Class 10
Finish: White Zinc Plated, Yellow Zinc Plated, Auto Black Plated,Chrome Plated & other as per customer requirement
Features
High Grade Raw Material
Dimensionally Accurate
Corrosion & Abrasion Resistant
PPAP Requirements
