(1) automatic tube loading machine of blood collection test tube mainly places pet and glass test tube into the tube mould automatically, so as to achieve subsequent automatic production;
(2) easy to operate, low failure rate, high production efficiency;
(3) adopt human-interface control, with high positioning accuracy;
(4) load the test tubes at different heights, and the height adjustment is convenient, i.E. Replacing with corresponding tube mould;
(5) cause zero harm to the test tube, automatically detect reversing tube and no tube, and it will automatically alarm when such defects are detected
The production line of culture dish consists of automatic box placing, automatic filling, automatic capping, automatic box overlaying, automatic packing, etc.;
(1) Automatic box placing: pile up the boxes in stack, then place them into the multi-channel positioning fixture, automatically place the boxes via vacuum chuck manipulator, and the placement speed is fast and operation is stable;
(2) Automatic filling: adopt imported filling system, with fast filling speed, adjustable filling volume and high accuracy, the filling work of different volume can be achieved, which improves the efficiency significantly;
(3) Automatic capping: after filling certain liquid into the culture dish box, start automatic capping after drying in the air, position the dried box filled with liquid precisely via the positioning device of capping, and the manipulator equipped with vacuum chuck will cap automatically, with fast capping speed, high efficiency and stable operation;
(4) Automatic box overlaying: automatically convey the capped culture dish box to the station of automatic box overlaying, and the precise positioning system will overlay the boxes automatically via servo system;
(5) Automatic packing: after overlaying, the automatic turnover mechanism will automatically lay flat a stack of culture dish boxes and then convey them into horizontal packaging machine, with good packaging effect, smooth product surface and clear seal-cutting edges, continuous packaging is available.
(1) With high gel filling speed, high repeated positioning accuracy, without wire drawing, bubbles or micro bubbles;
(2) The equipment adopts three-axis control, and it is stable during servo operation, with high accuracy and no vibration;
(3) 10-channel simultaneous gel filling (the number of gel filling channels can be customized as required by customers);
(4) It is equipped with constant temperature control system, so as to ensure the gel filling efficiency at low temperature;
(5) Adoption of man-machine interface control makes the modification of gel filling parameters convenient and simple.
(1) automatically arrange the plastic caps and butyl rubber stoppers properly in proper direction with the vibrating disk, convey them to the assembly station, and the assembly cam will suck the butyl rubber stoppers through vacuuming and insert them into the plastic caps for assembly purpose;
(2) feed simultaneously on two rails, making the assembly efficiency high, and the built-in detection function will ensure the qualification rate of assembled products;
(3) it is equipped with automatic no-material alarm device, with speed and variable frequency adjustable;
(4) customize upper-insert cap or lower-insert cap assembling machine as required by the customer
(1) mainly consisting of automatic seal-cutting and heat shrinkage, the heat shrink packaging machine adopts automatic feeding, automatic sealing control and heated air circulation, and the heat shrinking chamber is heated uniformly; the shrinking is completed by one time, with high working efficiency, which applies to those products of different heights and widths;
(2) with good packaging effect, smooth product surface and clear seal-cutting edges, continuous packaging is available;
(3) with human-machine interface control adopted, it is equipped with safety protection and alarm device, and easy to operate and maintain;
(4) it will collect wastes separately and automatically, and drawing breakage will not occur due to excessive tensioning, thus the wastes are easy to remove.
(1) Place the test tube mould into negative-pressure vacuum chamber, and form certain negative pressure inside the test tube;
(2) After forming certain negative pressure, assemble the cap automatically;
(3) After assembling the cap upon forming certain negative pressure inside the test tube, use the manipulator equipped with vacuum chuck to take the test tube out of the test tube mould, and then automatically install it into the foam tray;
(4) The accuracy of vacuum value is high and stable, which can be set freely;
(5) Adopt human-machine interface control, easy and simple to operate;
(6) Both forward tray loading and oblique tray loading machines (the equipment structure of forward tray and oblique tray is different) are available as required by the user.
(1) Double-sided labeling machine of blood typing card adopts Siemens PLC control and Schneider servo motor drive. Featuring fast speed, high accuracy, high stability, durability, application flexibility and other advantages, it drastically improves the production efficiency and saves the cost;
(2) With adoption of photoelectric detection and stepless speed regulation, it has advantages such as accurate labeling and high accuracy. Every box is labeled, and it can monitor and correct automatically if there will be no label;
(3) It can be used independently, with products to be placed on feeding end or discharging end, or it can be used online.
(1) Automatic tube loading machine of blood collection test tube mainly places PET and glass test tube into the tube mould automatically, so as to achieve subsequent automatic production;
(2) Easy to operate, low failure rate, high production efficiency;
(3) Adopt human-interface control, with high positioning accuracy;
(4) Load the test tubes at different heights, and the height adjustment is convenient, i.e. replacing with corresponding tube mould;
(5) Cause zero harm to the test tube, automatically detect reversing tube and no tube, and it will automatically alarm when such defects are detected;
(1) Fill separation gel via vacuum negative pressure suction, and the gel filling volume can be adjusted via time control;
(2) Adopt man-machine interface control, easy to operate, and the gel filling time and vacuum degree can be set flexibly;
(3) Be equipped with automatic feeding system, with no need for manual feeding;
(4) It is equipped with constant temperature control system, so as to ensure the gel filling efficiency at low temperature;
(1) This equipment is mainly used to centrifuge after separation gel of vacuum test tube and remove the bubbles in separation gel;
(2) Improve the compactness of separation gel and form bevel state, which significantly improve the overturn of separation gel during centrifugation detection as well as the applicability of separation gel;
(3) High centrifugation rate, centrifugation speed and adjustable time;
The micro column gel filling equipment of blood typing card consists of gel shake-up part, high-precision filling part, driving part and control part;
(1)Gel shake-up part: stir the gel back and forth with DC motor until the gel is mixed uniformly, with stirring speed adjustable, and anti-deposition is provided to ensure uniform filling of reagent and filling accuracy;
(2)High-precision filling part: adopt imported filling technology, driven by servo system, and ensure filling accuracy, no liquid leakage and no wall-hanging residual, applicable to multi-channel filling;
(3)Driven travelling part: with adoption of vibration-free servo motor, the precise screw rod and guide rail will cooperate with travelling, with high accuracy of repeated travelling positioning, and ensure the filling stud joint is aligned to the hole accurately;
(4)The equipment adopts human-machine interface control and sets the required filling volume freely, which is easy and convenient to operate.
(1) Automatic tube loading machine of blood collection test tube mainly places PET and glass test tube into the tube mould automatically, so as to achieve subsequent automatic production;
(2) Easy to operate, low failure rate, high production efficiency;
(3) Adopt human-interface control, with high positioning accuracy;
(4) Load the test tubes at different heights, and the height adjustment is convenient, i.e. replacing with corresponding tube mould;
(5) Cause zero harm to the test tube, automatically detect reversing tube and no tube, and it will automatically alarm when such defects are detected;
(1) with high gel filling speed, high repeated positioning accuracy, without wire drawing, bubbles or micro bubbles;
(2) the equipment adopts three-axis control, and it is stable during servo operation, with high accuracy and no vibration;
(3) 10-channel simultaneous gel filling (the number of gel filling channels can be customized as required by customers);
(4) it is equipped with constant temperature control system, so as to ensure the gel filling efficiency at low temperature;
(5) adoption of man-machine interface control makes the modification of gel filling parameters convenient and simple.
(1) with high gel filling speed, high repeated positioning accuracy, without wire drawing, bubbles or micro bubbles;
(2) the equipment adopts three-axis control, and it is stable during servo operation, with high accuracy and no vibration;
(3) 10-channel simultaneous gel filling (the number of gel filling channels can be customized as required by customers);
(4) it is equipped with constant temperature control system, so as to ensure the gel filling efficiency at low temperature;
(5) adoption of man-machine interface control makes the modification of gel filling parameters convenient and simple.
The micro column gel filling equipment of blood typing card consists of gel shake-up part, high-precision filling part, driving part and control part;
(1)Gel shake-up part: stir the gel back and forth with DC motor until the gel is mixed uniformly, with stirring speed adjustable, and anti-deposition is provided to ensure uniform filling of reagent and filling accuracy;
(2)High-precision filling part: adopt imported filling technology, driven by servo system, and ensure filling accuracy, no liquid leakage and no wall-hanging residual, applicable to multi-channel filling;
(3)Driven travelling part: with adoption of vibration-free servo motor, the precise screw rod and guide rail will cooperate with travelling, with high accuracy of repeated travelling positioning, and ensure the filling stud joint is aligned to the hole accurately;
(4)The equipment adopts human-machine interface control and sets the required filling volume freely, which is easy and convenient to operate.
(1) Combining with domestic actual production demand, this machine is equipped with completely automatic machinery equipment integrating automatic tube filling, coagulant dosing and atomizing, drying, capping, vacuum capping, tube taking and tray packing;
(2) This machine comprehensively adopts programmable control and pneumatic actuator. According to the product feature of vacuum blood collection tube, control all actuation actions of machinery in organic combination form via program and software;
(3) This machine is equipped with automatic heat shrink packaging machine, so as to achieve packing automation and fully automatic modular production;
(4) This machine adopts South Koreas Sejong bivalve and multi-function software control system to achieve dosing and atomizing; it also adopts two sets of 100-head plug-in hot air dryer, which can grasp the cap conveying device for 100 assembled caps, one full-automatic vacuum compensated-type vacuum capping machine and the tube taking and foam tray mechanism which can grasp 100 finished tubes simultaneously; after removing the tube, insert it into the foam packing tray mechanism, control such mechanism actions via programmable program and execute via pneumatic mechanism, in which way all procedures will be completed fully automatically, including BCA coagulant dosing, drying, capping, vacuum capping, tube taking and tray packing. This machine features high automation degree, high production efficiency, stable performance, low failure rate, easy operation, low maintenance fee, etc.
(5) It is able to install oblique foam tray online according to customers demand.
The aluminum foil laser cutting forming device of blood typing card consists of laser power generator, computer, positioning part and electrical control part;
(1) this device can cut the blood typing card aluminum foil into specified shape, which is applicable to cutting forming on large scale of aluminum foil sealing products;
(2) achieve cutting function with the laser output by fiber optic as well as high-speed scanning system, and the laser cutting efficiency is high, which is hard to deform, without burrs, beautiful in shape and can meet aluminum foil cutting forming of different shapes;
(3) this device can be used independently or linked to the flow line
(1) double-sided labeling machine of blood typing card adopts siemens plc control and schneider servo motor drive. Featuring fast speed, high accuracy, high stability, durability, application flexibility and other advantages, it drastically improves the production efficiency and saves the cost;
(2) with adoption of photoelectric detection and stepless speed regulation, it has advantages such as accurate labeling and high accuracy. Every box is labeled, and it can monitor and correct automatically if there will be no label;
(3) it can be used independently, with products to be placed on feeding end or discharging end, or it can be used online.
The aluminum foil film feeding and sealing machine of blood typing card consists of film feeding deviation rectifying part, die cutting part, high-temperature sealing part, cooling part and control part;
(1) film feeding deviation rectifying part: rectify through left-right deviation rectifying controller of the servo system, ensure high front-back and left-right film feeding accuracy as well as stable operation;
(2) die cutting part: adopt imported mould knife material, strictly control the processing technique of cutting die material, the film cutting efficiency is good without burrs, and the cutting die is endurable with long service life;
(3) high-temperature sealing part: with imported heating panel and sensor adopted, the temperature is constant during heating, making sealing effect of aluminum foil and card good without leakage;
(4) cooling method: adopt air cooling, and it is required to cool down the card surface due to excessive heat generated during sealing;
(5) adoption of human-machine interface control makes parameter adjustment simple and convenient
(1) the machine body is made of 304 stainless steel;
(2) this equipment is applicable to the reagent of blood collection tube, high-precision filling and atomizing;
(3) high filling accuracy, good atomizing effect;
(4) for problems occurring during liquid filling and atomizing, including nozzle jamming due to drug crystallization, difficulty in finding jamming in line production and complex inspection process in midway, this equipment will adopt a set of automatic alarm system;
(5) the liquid volume filled of equipment is adjustable, if 25ml dosage is required, only require to set on the touch screen, with no need for adjusting time, air pressure, etc.
