Used cardboard box corrugator line x 1 unit (Year 1993), consisted of the following devices:
Manufacturer, Machine type, the number of units
-Isowa, Liner mill roll x 3 units
-Isowa, EF. B Twin Facer SP 77 x1 unit
-Isowa, Splicer x 3 units
-Mitsubishi, Three-stage preheater x1 unit
-Uchida, Gluer x1 unit
-Mitsubishi, Heating Conveyor x1 unit
-Isowa, NSE Slitter scorer x 1 unit
-Isowa, Cutter x1unit
Machine width: 1600mm
Cardboard type: B flute, and E flute
Current condition of the machines: still in the production and plans to be in the production until March, 2018.
· Manufacturer: Hitachi Plant Mechanics
· Year: 2017
· Model: Overhead Crane Hoists
· Rated load: 20 t Test: 25 t
· Lifting load: 20.28 t
· Lift: 18.495 m (FL plus 10.995 m, FL minus 7.5 m)
· Span: 28.7 m
· Winding: 0.125 m / s , 30 kw (inverter control)
· Traverse: 0.3 m / s , 1.8 kw (inverter control)
· Driving: 0.75 m / s , 2 x 5.5 kw (inverter control)
· Power supply: 3-phase, 3 wire, 440 v, 60 Hz
· Traverse rail: 22 kg / m rail
· Traveling rail: 73 kg / m rail
We could offer you another crane with similar specifications.
Maker: Mitsubishi Forklift
Model: FD280 (Year 2016, Hour: 6.9 h) x1 unit
Located in Japan
Length: 9670 mm
Width: 3680 mm
Height with Mast lower positionï¼?5020mm
Height with Mast upper positionï¼?6770mm
Wheelbase: 4800mm
Front tread: 2635mm
Rear tread: 2750mm
Lowest from the floor level (below the mast): 380mm
Fuel tank: 480 litter
Weight: 43670kg
Engine: Mitsubishi 6D24-TCE1 Diesel engine
Rated output/rotation speed: 224/2200Kw/rpm
Max torque/rotation speed: 1135/1400 Nã?»m/rpm
Displacement: 11.94 litter
Tire:
Front: 16.00-25-28PR (I) Double tire
Rear: 16.00-25-28PR (I)
Running capacity: up to 33.5 km/h
Minimum turning radius: 6800mm
Mast: Roller driven 2 step Panorama mast
Tile: 6 degree and then 12 degree
Fork Length: 2440mm
Fork Width x Thickness: 320 x 110mm
Attachment:
Hydraulic Fork positioner with side shift
Side shift (For right and left): 300mm
Fork position range (Outer- Outer): 790-2840 mm
Lifting Capacity:
Load: 25000kg
Load centering: 1250mm
Max lifting: 3500mm
Lifting speed: Empty 430mm/sec, with load 390mm/sec
Manufacturer: Caterpillar
Fuel: Diesel
Model: C175-16 Generator set x 4 sets
Year of manufacture: 2012
KW: 2080
Hz: 50
V: 11000
RPM: 1500
Operating time: about 7500 to 11000 h
Second-hand Niigata company diesel generator set x 2
Generator manufacturer: Fuji Electric
Capacity: 2555.6 kVA
Voltage: 6600 V
Current 224 A
Hz: 60
Number of poles: 8
Operating time: about 58,665 h
Manufacturer: Niigata
Model: 12V26HX
Output: 3275 PS
Cylinder diameter: 260 mm
Stroke: 275 mm
Number of cylinders: 12
Rotational speed: 900 rpm
Year of manufacture: 1998
Both sets are in good condition.
Generators made by ABB
Output: 9500 kVA
Voltage: 11000 V
Frequency: 50 Hz
Rotation speed: 750 rpm
Number x 4
Made in 2016
Condition: New article
3 years warranty included
There is also a generator of 7125 kva.
We would like to introduce very affordable and very light ability- enhancing suits. These suits with stainless steel springs installed inside help construction workers, care-takers, farmers or any other physical strength required workers lift up heavy items. Unlike heavy duty industrial exoskeletons, those suits are very light and very easy to put it on and take it off, and those suits are washable (made of Stretch mesh: Nylon 80 percent, Polyurethane 20 percent) and do not require any power.
When lifting up a heavy item, the ability-enhancing suits enhance your back muscle by around 20 percent as well as reduces loading stress on your back and waist.
Also, walking knee supporters are available.
If you are interested, please contact us with your required size from the followings:
Waist circumference
Small size: 70-75 cm
Medium size: 75-80 cm
Large size: 80-85 cm
LL size: 85-90 cm
3L size: 90-95 cm
4L size: 95-100 cm
5L size: 100-105 cm
6L size: 105-110 cm
We also are looking for a sales representative for those suits and knee supporters. Please feel free to contact us.
We look forward to your kind response.
Toshiba, Second hand injection molding machine
Year: 1985
Machine type: IS2500DN-175L
Mold clamping force: 2500 ton
Releasing force:200 ton
Tie bars distanceã??HxV:1800x1700 mm
Plate sizeã??HxV:2800Ã?2600 mm
Clamping stroke:2700 mm
daylightï¼?MAXï¼?:3600 mm
Mold thickness:900ï½?1900 mm
Pushing forceï¼?hydraulicï¼?:60 ton
Extrusionã??stroke:350mm
Manufacturer: Tokyu Sharyo
Model: TL90H7R2Y (Pallet trailer)
Year: 2009
Total mileage: only 51km
Location: Tokyo, Japan
Serial Number: TL90H7R2Y-G001
Length: 11,650 mm
Width: 3,500 mm
Height: 2,490 mm
Loading platform top position: 1,830 mm (in rising position) : 1,450 mm (in low position)
Cargo bed length: 8,000 mm
Vehicle mass: 20,090 kg
Maximum payload : 70,000 kg
Gross vehicle weight: 90,090 kg
Tire size 10.00-20-14PR (I)
Conventional pallet trailers transporting heavy items with 3 axis tend to wear tires quickly due to many turnings at factories. This pallet trailer is designed to avoid quick tire wear by having 16 wheel axle, which is suitable for transporting large items at steel processing or manufacturing factories.
We would like to offer you a very unique water desalination system called
Ozomix System, which is proudly made in Japan. There are 2 types: One for sea water, and the other one for fresh water.
The most significant characteristic of this system is that it does not use any chemicals of chlorine in the pre-processing purification. Ozomix System is a compact water treatment device consisted of ozone processing and the reverse osmosis membrane processing.
Machine Name: DUS-30D
Target water: sea water
Capacity par day: 30 ton
Machine Name: DUS-100D
Target water: sea water
Capacity par day: 100 ton
Machine Name: DUS-180D
Target water: ground water, river water
Capacity par day: 180 ton
Please feel free to contact us for further information.
We would like to offer you a very unique water desalination system called
Ozomix System, which is proudly made in Japan.
This particular desalination system is desgined to be small size to be installed at ships. Also, this system is ideal for providing staff members with precious drinking water at oil rigging sites.
The most significant characteristic of this system is that it does not use any chemicals of chlorine in the pre-processing purification. Ozomix System is a compact water treatment device consisted of ozone processing and the reverse osmosis membrane processing.
Machine Name: DUS-10D
Designed to be installed at ship
Target water: sea water
Capacity par day: 10 ton
Please feel free to contact us for further information.Machine Name: DUS-10D
Designed to be installed at ship
Target water: sea water
Capacity par day: 10 ton
