Electric lube feeding pump
An electric lube feeding pump is composed of a transmission part, a sealing part, a pressurizing device, oil lifting part, safety valve, and lube feeding part, etc. Inserted into the standard 15kg oil tank, it is convenient to use.
Working Principle:
The transmission part drives the oil lifting part to move up and down, making the one-way valve inside the cavity to close or open. When the one-way valve close, the lube feeding pump sucks lube. On the contrary, the pump presses the lube out.
Component Structure:
transmission part
sealing part
pressurizing part
oil lifting part
Advantages:
With high flow and high pressure, our electric lube feeding pump is highly efficient with good performance.
The flow of current electric lube feeding pumps in domestic and international markets is less than 0.5L/min (lube 2# ). However, the flow of our lube feeding pump is 1L/min(lube 2# ), which is twice that of other pumps in the market.
Parameters:
1. Electricity:AC220V, 50Hz
2.The output of the outlet at ordinary temperature:1.2L/min(without oil pipe);1L/min (with 6M oil pipe)
3.The output of the outlet at low temperature(-10°C):0.9L/min(without oil pipe);0.7L/min(with 6M oil pipe)
4. Max delivery pressure:30MPa
5. Lube:0-3# lithium grease
6. The specification of pipes:Length 6M, pipe diameterÏ?13*Ï?22
Fittings Customization:
1. Pipe:max length: 10 meters
2. Pipe connectors: The customer can buy them by their own or provide us with their models for customization.
Overview:
Alp 80 series of centralized lubrication system is a new generation system, which is developed through long-term marketing research and technological innovation, and possessed several invention patents.
Application:
The capacity of alp series of lubrication pump is 1l, and 2l, it suits for the industry with fewer lube point, fewer grease volume and longer lubrication interval, such as commercial vehicle, wind power, engineering machinery, port, metallurgy, food machinery, paper machinery and printing industry.
Advantages:
Independent design
Suck the waste lube in bearings
Remove the pressure in bearing, s inner cavity
Avoid oil leakage and environmental pollution
Make sure lube filling
Grease suck and drain device
Brief introduction:
Grease suck and drain device, a part of waste grease recycle system, is specifically designed to suck the waste grease in bearings.
Diameters:
Pressure: 20mpa
Vacuum pull: -0.65 kpa ~-0.85kpa
Lube quantity: 0.6~0.8ml/cy
Anti-corrosion level: c4
Protection level: ip65
Innovation:
Applicable to high-cold area
Working temperature: -50~80
Auxiliary unloading valve patent technology
Wetting-proof patent technology
New-type oil tank guarantees that the lube flows by "fifo" rule
Overview:
Alp100 series lubrication pump is a closed system, consisting of dc motor, piston pump, relief valve, transparent oil tank, etc. There are alp100 (basic type), alp102(high strength type) and alp103 (high-cold area pump). During installation, the pump is fixed in a relatively closed protection box to avoid collision.
1. High strength pump can pump highly viscous lube.
2. High adaptability to operating limit and temperature range.
3. In severely cold areas, a temperature control sensor will be installed to guarantee the good operation of centralized lubrication system in high-cold regions.
4. Two fuel feeding valves are installed on the pump, which is convenient to refill the oil tank.
5. Pump nlgi-1# lithium grease during the whole year, solving the application problem in high-cold areas.
6. The auxiliary unloading valve patent technology effectively solves the unloading problem in long oil pipes.
7. Wetting-proof patent technology makes sure that the equipment works well in low-lying and waterlogged areas.
8. New-type pump structure guarantee the lube to follow "fifo" rule, effectively avoiding the deposition and deterioration of lube.
Innovations:
With air-pressure reservior, the pump can work with nlgi-3# extreme pressure lithium-based grease all year around, be with better lubrication effect.
With temperature control sensor, the pump can work well in alpine and frozen regions.
With invation patent for flooding safety device, the pump can work well in the low land with water.
The pump allows the grease in and out the reservior first, that effectively solving the grease deterioration caused by long-term accumulation.
The baroswitch for the air-pressure reservior makes the grease filling easy and convenient.
The single line distributor with own innovation patent is easy to be installed and expanded.
Each lubrication branch of distributor group works separately and each other is not affected. It can avoid the grease block, working with stable performance, long service life, easy and cheap for maintenance.
Max pressure: 25mpa output volume: 0.1, 0.2, 0.4, 0.6, 0.75, 1.0, 1.2, 1.5ml/cy
Grease type: nlgi
Innovations
With invation patent for flooding safety device, the pump can work well in the low land with water.
The pump allows the grease in and out the reservior first, that effectively solving the grease deterioration caused by long-term accumulation.
Introduction:
As one of the professional manufacturer in centralized lubrication system, Autol has applied for more than 50 national invention patents.
Our company centralised lubrication system would apply in wind turbine, port machinery, mining machinery, hoisting machinery, ship, construction machinery, woodworking equipment, beverage equipment, etc.
AUTOL pump has the advantage of :
1,The patent technology on the flooding safety device can make sure the equipment works normally in the low land with water.
2,The new design of the pumping station allows the grease in and out the tank first, effectively solving the grease deterioration caused by long-term ac cumulation.
3,The pioneering intelligent temperature control sensor breaks through the problem of the application in alpine and frigid regions.
Application:
Wind turbine, port machinery, mining machinery, hoisting machinery, ship, construction machinery, woodworking equipment, beverage equipment, etc.
Parameters:
Model: gear pump and plunger piston pump
Control mode: External monitor or Internal monitor
Temperature:20 degrees below zero~80 degrees
Automatic lubrication system
As one of the professional manufacturer in centralized lubrication system, autol has applied for more than 50 national invention patents and several international ones. Autol is one of the chief editors on national professional standards on lubrication systems, with its products covering all the following fields: commercial vehicles, engineering machinery, wind power equipment and heavy equipments, etc.
As one of the professional manufacturer in centralized lubrication system, Autol has applied for more than 50 national invention patents.
,The patent technology on the flooding safety device can make sure the equipment works normally in the low land with water.
Parameters:
Model: gear pump and plunger piston pump
Control mode: External monitor or Internal monitor
Temperature:20 degrees below zero~80 degrees
Any questions,pls. do feel free to contact us!
Feature:
waterproof patented technology;
intellectual temperature control patented technology;
without the problem of grease precipitation & deterioration;
refuel convenience and safety, 360 adjustable;
suitable for lubrication in -20 degree to 80 degree;
overview:
lubrication system with 19 patents to be successfully developed, adopts intellectual temperature control and waterproof technology.
Autol commpany has single line lubrication system; automatic lubrication system; multi point lubrication system; intellectual lburication system
Description
Centralized lubrication system / automatic greasing system for construction machinerys such as excavator, crane , bulldozer, grader, paver and cement pump truck , dump truck and loader machinery etc
Lubrication solution for construction machinery equipment- take mining truck for example
Overview:
ALP 50 series of lubrication pump integrates 19 patents to be successfully developed, adopts intellectual temperature-control and wetting-proof technology to completely solve the problems of grease precipitation & deterioration and central lubrication in rigid region, and also satisfy the marketing demand of low chassis public transportation. ALP 50 series use innovative technology to provide fully value promotion solution to our clients.
Working principle:
The system controls the gear pump to do periodic running through the ECU LCD monitor. When the system works, the motor drives the gear pump to conduct grease suction and discharge. After entering the main oil line, the high-pressure grease is supplied to each lubrication point through pressurized distributor. The system releases pressure after completing its run.
Overview:
Alp120 series high-pressure lube pump, honored with patent technologies, is applicable to different equipments. In terms of structure, it can be divided into 3 categories, stir bar, spring piston and air pressuretype.
Features:
With an self-designed air pressure oil tank, the lubrication system can pump nlgi-3lithium grease with good lubrication in the whole year.
Innovative smart temperature controlsensor makes sure the system is applicable to high-cold area.
Wetting-proof patent technology makes sure that the equipment works well in low-lying and waterlogged areas.
New-type pump structure guarantee the lube to follow "fifo" rule, effectively avoiding the deposition and deterioration of lube.
The baroswitch of the air pressure oil tank makes it more convenient to refill lube.
Application:
Al120 series lubrication pumps have been widely used in various large and medium-sized equipment such as wind power, electricity, mining, metallurgy, heavy machinery, which have a large number of lube points, large quantity of lube and short lubrication cycle.
Using for bus lubrication system.
Innovations
The pumps adopt stirring board with one innovation patent, which can pumping nlgi-0 grease all year around.
With invation patent for flooding safety device, the pump can work well in the low land with water.
Description
Centralized lubricaion system / automatic greasing system for big equipment such as concrete equipment, harbor equipment, steel mill and sugar mill etc
Lubrication solution for heavy-duty equipment- take sugar mill equipment for example.
1.Automatic switchover of system
Switch the pump at low liquid level and add the grease automatically. The grease supply time and pause interval can be set according to the requirement. The system can interlock with the host equipment
2.Intelligent fault diagnosis
The system can diagnose the faults of each distributor. With the warning function for low liquid level, the system can indicate the fault type (blockage, through, leakage, getting stuck, broken) the fault database accumulated for several years can be used for reference.
3.Remote monitoring
Suit and satisfy the need of the modern factoryâ??s automatic production. Truly inflect the grease supply state of each lube point, making the equipment management personnel know fairly well. Remote setting and adjustment of the grease supply parameter of each lube point can meet the current need of the equipment lubrication.
Description
1.Ak04 monitors
The ak04 monitor adopt the ecu lcd monitoring system, featuring intelligent fault diagnosis and display and can vehicle interface. The intelligent temperature control sensing patent technology breaks through the technical bottleneck of the application in alpine and frozen regions.
2.Single line distributor
With single line distributor, the lubrication system pressure is from the mainline directly, the flexible grease discharge pressure is more than one time higher than the unloading distributor. The grease discharge pressure can expand higher or lower according to the customerâ??s requirement. Stable performance, long service life, easy maintenance and replacement, and low cost.
3.Arp60 series lubrication pumps
It can pump the grease nlgi 0 all year around. The pioneering stirring technology systematically solves the grease deterioration caused by long-term accumulation. The high-performance low speed machine and the low-noise lubrication gear pump match reasonably, effectively extend the service life for two to four times. The patent technology of the flooding safety device can make sure the equipment works well in the low land with water.
Product overview
The al82/al102 series lubrication system consists of high-pressure plunger pump, grease distributor, cycling indicator and monitor. Al82 series suits for the machinery with fewer greasing points; al102 series is appropriate for the machinery with more greasing points.
Applications
Wind turbine, port machinery, mining machinery, agricultural machinery, hoisting machinery, construction machinery, beverage equipment, etc.
Working principles
The lcd monitor controls the plunger pump for periodic running. When the system works, the monitor drives the grease pump for outputing grease. After entering the grease tube, the grease is supplied to each lubrication points successively through the progressive distributor according to the specified sequence.
Product overview
The al81/al101 series centralized lubrication system consists of plunger pump, electromagnetic unloading valve, auxiliary unloading valve, grease distributor, grease pressure sensor and monitor. Al80 series is suitable for the machinery with fewer lubrication points; al100 series is suitable for the machinery with more lubrication points.
Applications
Commercial vehicles, agricultural machinery, construction machinery, injection moulding machinery ,
Concrete batch plants, printing machinery, packaging machinery,
Working principles
The lcd monitor controls the plunger pump for periodic running. When the system works, the monitor drives the grease pump for outputing grease. After entering the main grease tube, the grease is supplied to each lubrication points through the grease distributor.
Automatic lubrication system manufacturer, apply for commercial vehicle, wind turbine, construction machine, mining industry, port.
Innovations:
The pump can work with nlgi-2 extreme pressure lithium-based grease all year around,
With invation patent for flooding safety device, the pump can work well in the low land with water.
The pump allows the grease in and out the reservior first, that effectively solving the grease deterioration caused by long-term accumulation.
Its feature is stable performance and convenient maintenance.Furthermore each lubrication branch in one distributor group works separately and each other is not affected.
Max pressure: 6.3mpa
Output volume: 0.1, 0.2, 0.4ml/cy
Grease: nlgi000, 00, 0, 1
The progressive distributor supplies grease to each lubrication point progressively through its corresponding plunger piston.
He block type progressive distributor is an integral block-type structure, including a variety of specifications from 2 to 14 outlets. The block distributor features high working pressure, which can be applied to the machinery equipment with heavy load.
The chip type progressive distributor is consists of a top chip, a bottom chip and several middle chips (usually 1~8 pieces), with two outlets on each middle chip. The grease pump capacity of each outlet, which is determined by the sectional area and stroke of the plunger piston, can be designed individually.
Apply for construction machine, truck, mining industry, wind turbine lubrication system.
Innovations
With invation patent for flooding safety device, the pump can work well in the low land with water.
The pump allows the grease in and out the reservior first, that effectively solving the grease deterioration caused by long-term accumulation.
Product overview
The ar60h single-line parallel centralized lubrication system contains grease pump, single-line distributor and monitoring unit. The system not only improves the grease suction performance of the grease pump and the grease injection performance of the grease distributor, but also solves the grease deterioration problem caused by long-term accumulation on the bottom of the reservior.
Applications
Commercial vehicle, machine tool, printing machinery, packaging machinery, and agricultural equipment.
Working principles
The system controls the grease pump for periodic running by the monitor. When the system works, the monitor drives the grease pump for outputing grease. The grease is divided to each greasing points through single line distributor. The system releases pressure when finish one time circle work.
Product Overview
The AR60H single-line parallel centralized lubrication system contains grease pump, single-line distributor and monitoring unit. The system not only improves the grease suction performance of the grease pump and the grease injection performance of the grease distributor, but also solves the grease deterioration problem caused by long-term accumulation on the bottom of the reservior.
Applications
Commercial vehicle, machine tool, printing machinery, packaging machinery, and agricultural equipment.
Working Principles
The system controls the grease pump for periodic running by the monitor. When the system works, the monitor drives the grease pump for outputing grease. The grease is divided to each greasing points through single line distributor. The system releases pressure when finish one time circle work.
Applications
Commercial vehicle, machine tool, printing machinery, packaging machinery, and agricultural equipment.
Working principles
The system controls the grease pump for periodic running by the monitor. When the system works, the monitor drives the grease pump for outputing grease. The grease is divided to each greasing points through single line distributor. The system releases pressure when finish one time circle work.
Product Overview
Suplub-W system is the new intelligent wind turbine centralized lubrication solution that integrates computer, automation, wireless data communication and centralized lubrication technology. It consists of intelligent monitor unit, grease supply unit and waste oil recovery unit. Wireless remote control center can be installed in wind farm headquarters for monitoring the working condition of all lubrication systems.
Applications
Automatically lubricate the main bearing, yaw bearing, pitch bearing, generator bearing of the wind turbine generator.
Working Principles
The working process of the Suplub-W lubrication system contains three steps:
Step I: When the pause interval ends, the intelligent controller firstly sends start signal, and then the high-pressure lubrication pump starts and the grease is conveyed to the main grease line. When the grease pressure reaches the setting value, the intelligent controller successively opens the points that need grease, and the grease is injected to the points after accurately measuring according to the needs.
Step II: After all the points are lubricated, the intelligent controller sends waste grease recovery signal, and the waste grease suction & draining device starts to recover the waste grease.
Step III: After the waste grease recovery finishes, the intelligent controller sends stop signal to each actuator, the high-pressure lubrication pump stops and the lubrication system enters the next pause period.
Contact:Frank Niu
Product overview
The ar60h single-line parallel centralized lubrication system contains grease pump, single-line distributor and monitoring unit. The system not only improves the grease suction performance of the grease pump and the grease injection performance of the grease distributor, but also solves the grease deterioration problem caused by long-term accumulation on the bottom of the reservior.
Applications
Commercial vehicle, machine tool, printing machinery, packaging machinery, and agricultural equipment.
Working principles
The system controls the grease pump for periodic running by the monitor. When the system works, the monitor drives the grease pump for outputing grease. The grease is divided to each greasing points through single line distributor. The system releases pressure when finish one time circle work.
Product Overview
The L83/AL103 Series is single-line lubrication system, consists of plunger pump, single-line distributor, cycling indicator and monitor, using high-viscosity NLGI-3# grease in alpine and frozen regions.
Applications
Wind turbine, port machinery, mining machinery, agricultural machinery, hoisting machinery,construction machinery, beverage equipment, etc.
Working Principles
The LCD monitor controls the plunger pump for periodic running. When the system works, the monitor drives the grease pump for out put grease. After entering the grease tube, the high-pressure grease is supplied to each greasing points successively through the grease distributor . If the machinery equipment being lubricated is equipped with the air source, this ALP83/103 grease pump series can leave out its own air pump and air holder.
Introduction:
Al50 centralized lubrication system, a new generation vehicle lubrication system, which absorbs ar60 gear pump technology and other 19 patents. Al50 series is designed on the basic of our years of centralized lubrication in commerical vehicles, having unique outlook design.
Application:
Suitable for commercial vehicles, other small machine, wonderful for bus coach vehicles.
