1) product function
Reflective glass beads can improve the retro-reflection property of the road marking line. Driving at night, the headlights shines on the road marking line with glass beads, the light of headlights is reflected back parallelly. So the driver can see the road ahead clearly, and drive safely at night.
2) product specification:
Jt/ t446-2001 no.1, 2, 3;
Ksl 2521 no.1 and 2;
Bs6088 class a and b;
Aashto m247 type 1 and type 2;
En1423 and en1424;
Ts en1423;
As/ nzs2009: 2002;
Cns; jis r3301; australian standard a, b, c, d.
According to the client's request.
3) technical information,
Appearance: clean, transparent, no obvious impurity
Composition: soda lime glass
Density: 2.4-2.6g/cm3
Refractive index: 1.51-1.64
Roundness: 80% (600< sieve size< 850um, spherical beads>80%)
Content sio2 >68%
Hardness (moh's): 5-7
4) packing:
1.Using double-deck package, the inner is polythene film and its thickness is not less than 0.5mm, the outer is plastic woven bag to prevent leak or damp. The net weight of each bag is 25±0.2kg.
2.Using double-deck package, the inner is polythene fim and its thickness is not less than 0.5mm, the outer is brown paper(3layers) bag to prevent leak or damp. The net weight of each is 25±0.2kg.
3.Using double-deck package, the inner is polythene fim and its thickness is not less than 0.5mm, the outer is plastic woven bag to prevent leak or damp. The net weight of each is 1000±8kg.
1) Product Introduction
Glass beads for sandblasting has the features of chemical stability, high mechanical intensity and hardness. They can be blasted onto the object surface with compressed air and can be used on compress glass, rubber, plastic, moulds with metal casting or compressing. The jetting balls would help reduce elasticity of the surface materials and increase wearing capacity.
High Strength Glass Beads (for Blasting)
With compressed air as implicit power, this product is made by sprinkling beads under high speed and pressure on the surface of workpiece for peening and polishing.
Other purposes of the products are as follows:
1. Clear diverse moulds of impact forging, forging, glass, rubber and plastic, metal casting and extrusion.
2. Eliminate tensile stress, increase fatigue life and enhance stress corrosion resistance. For example, aircraft engine turbo, vane, shaft, undercarriage, diversified springs and gears, etc.
3. Clean and remove slitter edge and burr on the circuit plate and plastic-sealed geminate transistors before stannum soldering
4. Remove stems in the piston and cylinder and provide bright and half-lackluster surface for medical mechanical instruments and automobile parts
5. Clear electromotor and such parts as loop, electric brush and rotor of during heavy repair
6. Clean up and remove burr of metal tube and precisely-melten non-ferrous metal tube. Be used for peening aggrandizement and polishing of textile machinery parts.
2) Technical references
Appearance: Clean and transparent, no visible bubbles and impurity.
Density:2.4-2.6g/cm3
Hardness:6-7(Moh's)
Spherical beads:
SiO2 content:
3) Package
1.Using double-deck package, the inner is polythene film and its thickness is not less than 0.5mm; the outer is plastic woven bag to prevent leak or damp. The net weight of each bag is 250.2kg.
2.Using double-deck package, the inner is polythene film and its thickness is not less than 0.5mm, the outer is paper-plastic compound bag to prevent leak or damp. The net weight of each is 250.2kg.
3.According to clients' requirement.
