1. the introduction:
It is an equipment used for cutting concrete, also known as flat or floor sawing, is used to cut horizontal flat concrete surfaces such as floors, bridge decks and pavement.
Q500w gasoline diesel asphalt concrete cutting machine feature a diamond blade that is mounted on a walk-behind machine that requires only one operator., mounted with gasoline engine 13hp or diesel engine, it can cut concrete thickness up to 180mm, 20m-40m per hour speed, similar with wacker neuson
It is generally used to cut horizontal surfaces in asphalt or reinforced concrete slab on grade, as well as cutting suspended slab openings both indoor and outdoor
Q500w gasoline diesel asphalt concrete cutting machine is the perfect solution for making penetrations or openings in concrete floors to access and repair a broken water pipe or sewer line,
Q500w gasoline diesel asphalt concrete cutting machine is ideal for removal of bridge decks, airport runways, tarmacs, roadway sections or patches, etc.
Compared to jack hammering, q500w gasoline diesel asphalt concrete cutting machine for sale is less time consuming, far less noisy and creates less stress to structural areas,
Typical applications include:
Plumbing trenches
Highway patching & runway repair
Demolition and slab removal
Decorative cuttings
Electrical
Slap & road repair
Control & expansion joints
Stairwells, elevator openings
Modelq500w
Max blade capacity500mm
Max cutting thickness180mm
Power13hp honda or diesel
Speed20m-40m/h
Weight120kg
Size1280*680*920mm
1. The introduction:
Cm230 mini small portable concrete mixer is a portable concrete mixer, mounted with a 0.75kw motor, rotation speed 33rpm, volume 230l.
It's a good option when you handle a small concrete project,
It requires only one operator.
Modelcm230
Capacity230l
Power0.75kw
Rotation speed33rpm
Max grain diameter20mm
Weight60kgs
Dimension870*670*700mm
1. The introduction:
Mg36 concrete finishing power trowel is an equipment used for trowelling green concrete surface, to make the surface smooth, this is a 36 inch trowel machine,
Modes of operation, there are two kinds modes, walk behind mode and ride on mode
Power sources modes, there are two kinds electricity and fuel oil(honda, lifan, briggs & stratton and others).
Modelmg36
Ring diameter920mm/36 inch
Rolling speed100-120rpm
Powerhonda or others
Blade4 pcs
Disc1 pcs
Gw/nw95kg/75kg
Dimension1500*900*800mm
2. Contact with us:
1. the introduction:
Bj200f diesel gasoline concrete floor planer is a walk behind scarifying machine used for concrete asphalt road surface, mounted with 13hp gasoline engine or diesel engine, it can mill 5mm thickness adjustable, 250mm working width
It can also mill surface coating, surface painting, layer of epoxy, road surface layer, surface scribing,
Modelbj200f
Power13hp gasoline engine
Milling width250mm
Milling thickness5mm
Weight220kgs
Dimension1300*760*1250mm
1. the introduction:
C80 honda gasoline vibratory plate compactor feature with gasoline engine honda gx160 or others, it can supply 13.5kn impact force,
Engine options: honda, lifan, briggs & stratton,
Modelc80
Plate size l*w (mm)570*430
Max travelling speed (m / min)15-20
Limited grade ability20
Frequency (rpm)5600
Impact force (kn)13.5
Engine modelhonda gx160 or others
Packing size (l*w*h) mm760*520*700
Net weight (kg)80
1. The introduction:
It is a thread rolling machine for rebar, mounted with a 4kw motor, it can thread 14mm-40mm diameter rebar at 80mm length,
Thread pitch 2.5mm, 3.0mm, 3.5mm
It requires only one operator.
Modelhgs40
Rebar diameter14mm-40mm
Rotate speed40-62 r/min
Motor power4 kw
Length of thread80mm
Thread pitch2.5mm, 3.0mm, 3.5mm
Gw/nw500kg/450kg
Package1250mm*750mm*1050mm
1. The introduction:
Hcr90c diesel jumping jack tamper rammer mounted with diesel 4hp engine, it could supply 12kn impact force, engine rotating speed 3600rpm,
Impact frequency 450-650 times per minute
Engine options:honda gasoline engine, lifan gasoline engine, briggs & stratton gasoline engine, diesel engine.
Modehcr90c
Force11kn
Jump altitude55mm
Engine rotating speed3600r/min
Impact frequency450-650times/min
Tamping plate0.08m
Forward velocity8-12m/min
Engine powerdiesel engine 4hp
Gw/nw92kg/85kg
Package97*50*60cm
1. The introduction:
The gq40h steel iron bar cutter was designed for cutting rebars, working along with a 3kw motor, it can cut off 4mm-40mm diameter rebars, cutting efficiency depends on operator's experience
It's a light model and cheap for saving budgets
It requires only one operator.
Modelgq40h
Ordinary carbon steel diameter40mm
Deformed steel bar32mm
Cut flat steel specifications7015mm
Cut square bar specifications3232mm
Cutting angle steel specifications5050mm
Motor power3kw
Cutting frequency35times/min
Gw/nw400kg/380kg
Package1325*500*840mm
