1. Applications of testing machine
This machine is applicable to metal, cementing compound, tubes, sectional bars, aerospace, petrochemical, waterproof rolls, wire and cable, textile, fiber, rubber, ceramics, food, mechanical packaging, geo-textile, film, wood, paper and other industries and quality supervision department, and it also can be used in college for teaching demonstration.
2. Features of testing machine
1) Adopting aluminum alloy cover, with attractive streamline structure
2) Mainly used to test mechanical properties for metal, non-metal and composite materials
3) Adopting precision auto control and data acquisition system to realize fully digital adjustment to data acquisition and control process. During test, it can test max. Bearing tensile force, compression force, tensile strength, deformation, elongation, yield point and other technical specifications
4) After test, the above parameters can be calculated automatically through main controller according to the test parameters, which are set before test and meantime display the corresponding test results. All test parameters can be saved and inquired after test, also can be printed out.
3.Spec. of testing machine
No.Item Spec.
1Max. Load 20KN
2Resolution of test force±300000
3Resolution of displacement0.001mm
4Precision of crossbeam displacement±0.5%
5Precision of deformation±0.5%
6Measuring range of test force1%-100%FS
7Relative error of test force±1%
8Relative error at zero point±0.5%
9Speed of crossbeam0.01-500mm/min
10Precision of crossbeam speed±1%
11Speed range of load0.005%-5%FS/s
12Precision of load speedWhen speed is less than 0.05FS/s, precision is within ±1% of set value, when speed is more than 0.05FS/S, precision is within ±0.5% of set value
13 Speed of deformation0.005%-5%FS/s
14 Precision of deformation speedWhen speed is less than 0.05FS/s, precision is within ±1% of set value, when speed is more than 0.05FS/S, precision is within ±0.5% of set value
15 Stroke of crossbeam 900mm
16 Effective tensile height 650mm
17 Effective test span 400mm
18 Effective compression height 800mm
19 Diameter of compression platen 100mm
20 Voltage and power 220V10%, 50Hz, 700W
21 Dimension of main machine650X450X1650mm
22 Weight of main machineabout 300kg
1. Applications of testing machine
This machine is applicable to metal, cementing compound, tubes, sectional bars, aerospace, petrochemical, waterproof rolls, wire and cable, textile, fiber, rubber, ceramics, food, mechanical packaging, geo-textile, film, wood, paper and other industries and quality supervision department, and it also can be used in college for teaching demonstration.
2. Features of testing machine
1) Adopting aluminum alloy cover, with attractive streamline structure
2) Mainly used to test mechanical properties for metal, non-metal and composite materials
3) Adopting precision auto control and data acquisition system to realize fully digital adjustment to data acquisition and control process. During test, it can test max. Bearing tensile force, compression force, tensile strength, deformation, elongation, yield point and other technical specifications
4) After test, the above parameters can be calculated automatically through main controller according to the test parameters, which are set before test and meantime display the corresponding test results. All test parameters can be saved and inquired after test, also can be printed out.
5) With remote control box to realize speed adjustment of crossbeam, flexibly and freely switched
6) With functions of automatic return to original position, intelligently, efficiently, quickly
7) With limit position function of any working position and over voltage, over current protection functions, reliable and safe
8) With many control modes of constant speed control to force, stress, deformation, strain and low cycle and user self-programming control
9) Switch among many test curves: stress-strain curve, load-deformation curve, load-displacement curve, load-time curve, deformation-time curve, displacement-time curve. Partial enlargement, overlap and comparison.
1Max. Load100KN
2Resolution of test force1/±300000
3Resolution of displacement0.001mm
4Precision of crossbeam displacement±0.5%
5Precision of deformation±0.5%
6Measuring range of test force1%-100%FS
7Relative error of test force±1%
8Relative error at zero point±0.5%
9Speed of crossbeam0.01-500mm/min
10Precision of crossbeam speed±1%
11Speed range of load0.005%-5%FS/s
12Precision of load speedWhen speed is less than 0.05FS/s, precision is within ±1% of set value, when speed is more than 0.05FS/S, precision is within ±0.5% of set value
13Speed of deformation0.005%-5%FS/s
14Precision of deformation speedWhen speed is less than 0.05FS/s, precision is within ±1% of set value, when speed is more than 0.05FS/S, precision is within ±0.5% of set value
15Stroke of crossbeam800mm
16Effective tensile height650mm
17Effective test span500mm
18Effective compression height700mm
19Clamps for round specimenÃ?4-9mm; Ã? 9-14 mm
20Clamps for flat specimen0-7mm, 7-14mm
21Diameter of compression platen150mm
22Voltage and power220V±10%, 50Hz, 1.5KW
23Dimension of main machine850X555X1900mm
24Weight of main machineabout 650kg
1Max. Load200KN
2Resolution of test force1/±300000
3Resolution of displacement0.001mm
4Precision of crossbeam displacement±0.5%
5Precision of deformation±0.5%
6Measuring range of test force1%-100%FS
7Relative error of test force±1%
8Relative error at zero point±0.5%
9Speed of crossbeam0.01-500mm/min
10Precision of crossbeam speed±1%
11Speed range of load0.005%-5%FS/s
12Precision of load speedWhen speed is less than 0.05FS/s, precision is within ±1% of set value, when speed is more than 0.05FS/S, precision is within ±0.5% of set value
13Speed of deformation0.005%-5%FS/s
14Precision of deformation speedWhen speed is less than 0.05FS/s, precision is within ±1% of set value, when speed is more than 0.05FS/S, precision is within ±0.5% of set value
15Stroke of crossbeam1000mm
16Effective tensile height600mm
17Effective test span600mm
18Effective compression height500mm
19Diameter of compression platen100mm
20Voltage and power380V±10%, 50Hz, 3KW
21Dimension of main machine1050X750X2600mm
22Weight of main machineabout 1600kg
1Max. Load300KN
2Resolution of test force1/±300000
3Resolution of displacement0.001mm
4Precision of crossbeam displacement±0.5%
5Precision of deformation±0.5%
6Measuring range of test force1%-100%FS
7Relative error of test force±1%
8Relative error at zero point±0.5%
9Speed of crossbeam0.01-500mm/min
10Precision of crossbeam speed±1%
11Speed range of load0.005%-5%FS/s
12Precision of load speedWhen speed is less than 0.05FS/s, precision is within ±1% of set value, when speed is more than 0.05FS/S, precision is within ±0.5% of set value
13Speed of deformation0.005%-5%FS/s
14Precision of deformation speedWhen speed is less than 0.05FS/s, precision is within ±1% of set value, when speed is more than 0.05FS/S, precision is within ±0.5% of set value
15Stroke of crossbeam1000mm
16Effective tensile height600mm
17Effective test span600mm
18Effective compression height500mm
19Diameter of compression platen100mm
20Voltage and power380V±10%, 50Hz, 3KW
21Dimension of main machine1050X750X2600mm
22Weight of main machineabout 1600kg
1.Features
Open sided frame and upper oil cylinder for an easy and fast positioning of the specimen between the rollers
Load cell to measuring force, more accurately
Bending rollers are designed to be articulated type and also can be changed to be fixed type by inserting plug, which makes the changing of third point loading to center point loading easily.
2.Technical parameters
Distance between upper and lower bending rollers0-400mm
Test speed0.001-150mm
Max. Capacity200kn
Measuring range2%-100%fs
Precision1%
Distance between upper bending rollers for third point loading350mm
Distance between lower bending rollers900mm
Control modeeletro-hydraulic servo close loop control
1.Applications
This cement mortar flexural and compressive strength testing machine is for determining the flexural and compressive strength of moulded mortar specimens. The flexural strength of mortar is determined by three point loading of hardened moulded mortar prism specimens to failure. The compressive strength of the mortar is determined on the two parts resulting from the flexural strength test.
2.Size of mortar for flexural strength test
Cement prism specimen: 40x40x160mm
3.Brief introduction of cement flexural and compressive strength test procedure
Cement flexural strength test
1)place the cement prism in the test machine with one side face on the supporting rollers and with its longitudinal axis normal to the supports.
2)select the apply rate and apply the load vertically by means of the loading roller to the opposite side face of the prism until fracture.
3)keep the prism halves damp until tested in compression
Cement compressive strength test
1)center the prism halves laterally to the platens of the testing machine.
2)increase the load smoothly at a set rate over the entire load application until fracture.
1. Applications of testing machine
ï?·This machine is applicable to metal, cementing compound, tubes, sectional bars, aerospace, petrochemical, waterproof rolls, wire and cable, textile, fiber, rubber, ceramics, food, mechanical packaging, geo-textile, film, wood, paper and other industries and quality supervision department, and it also can be used in college for teaching demonstration.
2.Specs. of testing machine
No.ItemSpec.
1Max. Load10KN
2Resolution of test force1/±300000
3Resolution of displacement0.001mm
4Precision of crossbeam displacement±0.5%
5Precision of deformation±0.5%
6Measuring range of test force1%-100%FS
7Relative error of test force±1%
8Relative error at zero point±0.5%
9Speed of crossbeam0.01-500mm/min
10Precision of crossbeam speed±1%
11Speed range of load0.005%-5%FS/s
12Precision of load speedWhen speed is less than 0.05FS/s, precision is within ±1% of set value, when speed is more than 0.05FS/S, precision is within ±0.5% of set value
13Speed of deformation0.005%-5%FS/s
14Precision of deformation speedWhen speed is less than 0.05FS/s, precision is within ±1% of set value, when speed is more than 0.05FS/S, precision is within ±0.5% of set value
15Stroke of crossbeam900mm
16Effective tensile height650mm
17Effective test span390mm
18Effective compression height800mm
19Diameter of compression platen100mm
20Voltage and power220V±10%, 50Hz, 700W
21Dimension of main machine550X400X1650mm
22Weight of main machineabout 260kg
Applications and functions
This series testing machine adopts hand control. It is mainly used to do tensile test, compression test, bending test, torsion test, shear test to examine mechanical properties of metal materials, non-metal materials, composite materials and other materials.
Features
1.Stable and reliable loading frame
Loading frame adopts underneath hydraulic cylinder. Main loading parts use high stiff materials and good connecting to reduce inclination angle of crosshead under load, enable very precise alignment and application of force to specimen.
2. Easy and convenient to install and take off specimen
The clamps adopt whole open structure to enable install and take off specimen easity
Using of hand control box to control open and close of clamping jig to effectively install and take off specimen
3. Precise measuring and control system
Bidirectional load cell is used, high precision, stable, and accurate.
High effective and precise servo measuring control system is used to make the machine response as quickly as possible during operation and test and high precise test results(force at break, tensile strength, compression strength, yield point, elongation, etc) are got after test.
4. Extensive applicability
A wide range of gripsenables test machines to be used for tests on plastics, elastomers, metals, composites, paper, board, textiles, foams, foodstuffs and components, while the generous test-area depth allows the use of larger fixtures and enables larger components to be tested.
5. Accord with many test method
Test method of GB, ISO, JIS, ASTM, DIN, BS, EN, etc can be satisfied.
6. Safe
Limit position protection of cylinder
Over flow protection of hydraulic system
The Universal Testing Machine is suitable to be used in:
1) production lines, where the operator has to be fast and efficient, and accurately control the test,
2) testing lab environments, where using the advanced software, the users can analyze the test data, have full control on processing, filling, and test management.
The Universal Testing Machine(UTM) is used to test the tensile and compressive strength, flexural and bending strength and shearing strength of materials. The UTM can perform many different varieties of tests on an equally diverse range of materials, components, and structures such as iron, steel, steel bar, rebar, rod, spring steel, wire, cable and so on. Our UTM models are modular and can be adapted to fit the customerâ??s requirements.
The UTM can accommodate many kinds of materials, ranging from hard samples, such as metals and concrete, to flexible samples, such as rubber and textiles. This makes the universal testing machine equally applicable to virtually any manufacturing industry.
The universal testing machine can evaluate materials properties such as tensile strength, elasticity, compression strength, yield strength, elastic and plastic deformation, bending strength and strain hardening. Different models of universal testing machine have different capacities, some as low as 100N and others as high as 3000KN.
High stiffness of the leading screw and robust crosshead structure, maximum elimination the effection of load frame deformation;
Matched with various test fixture, like peal, puncture, tear, pneumatic grip, belt tension etc., this UTM can be used to metal, non-metal, composite material like rubber, steel wire, plasitc, seat belt, textile character test.
Zbl-r800 concrete rebar/rebar locator is a multifunctional integrated rebar detector which can be used for testing the thickness of protective layers, measuring the diameter, location, and distribution of rebar as well as for detecting the corrosion content of a rebar.
Features
Multi function rebar detector = rebar locator + rebar corrosion detector; an economical and convenient device.
This model features the worldâ??s first wireless onsite data transfer function for such a device and remote management is also available
Data can be stored on a usb-thumb drive, great for field work
This device can generate rebar distribution map and rebar corrosion potential contour graph.
Powerful professional analysis-process software allows for the automatic generation of test reports.
1.Application
It is mainly used to measure the wear-resisting property of concrete paving block. By the grinding between corundum and sample to calculate the loss in specimen volume.
2.Test method:
En 14157 natural stones---determination of abrasion resistance method b:bohme abrasion test
3.Specifications
1diameter of abrasion disc750mm
2abrasive load2943n
3disc rotating speed301rpm
4disc hardness190hb220
5distance between center of sample and center of disc220mm
6test sample(71x71) 1.5mm
7control modedigital control and auto stop when set cycle time is reached
8voltage and powersingle phase, ac220v, 50hz
1.Introduction and application-torsion testing machine
it is applicable to static mechanical properties test for metallic, nonmetallic materials and various construction member, like transmission shaft and semi-axis;
adopting horizontal structure, computer screen display, digital data acquisition and control system as well as fully digital ac servo system;
adopting planetary cycloid pinwheel speed reducer to drive, with features of even loading, stability, without impact, accurate data acquisition.
if equipped with special grips, it can perform torsional force, torsional angle, and angle stiffness for metals and rubber cohesive layers.
parameters modulus g, proof strength, non-proportional torsionp, upper yield strengtheh, lower yield strengthïel, torsional strengthm, etc can be measured and calculted on software automatically.
2. Main technical parameters- torsion testing machine
1Max torque500nm
2Measuring range of torque10nm-500nm
3Torque resolution1/±200000
4Relative error of indicating value of torque1%
5Torsion angle resolution0.01°
6Torsion speed0-360°/min
7Relative error of torsion speedWithin ±1% of set value
8Max distance between grips600mm
9Axiality of two gripsLess than ï1.0mm
10Central height of main axis170mm
11Power0.75kw
12Voltage220v±10% 50hz
13Dimension1750x600x950mm
1.Introduction and application-torsion testing machine
it is applicable to static mechanical properties test for metallic, nonmetallic materials and various construction member, like transmission shaft and semi-axis;
adopting horizontal structure, computer screen display, digital data acquisition and control system as well as fully digital ac servo system;
adopting planetary cycloid pinwheel speed reducer to drive, with features of even loading, stability, without impact, accurate data acquisition.
if equipped with special grips, it can perform torsional force, torsional angle, and angle stiffness for metals and rubber cohesive layers.
parameters modulus g, proof strength, non-proportional torsion ïp, upper yield strength ïeh, lower yield strengthïel, torsional strength ïm, etc can be measured and calculted on software automatically.
2. Main technical parameters- torsion testing machine
1Max torqu1000nm
2Measuring range of torqu20nm-1000nm
3Torque resolution1/±200000
4Relative error of indicating value of torqu1%
5Torsion angle resolution0.01°
6Torsion speed0-360°/min
7Relative error of torsion speedWithin ±1% of set value
8Max distance between grips600mm
9Axiality of two gripsLess than ï1.0mm
10Central height of main axis170mm
11Power0.75kw
12Voltag220v±10% 50hz
13Dimension1750x600x950mm
1. Applications of testing machine
This machine is applicable to metal, cementing compound, tubes, sectional bars, aerospace, petrochemical, waterproof rolls, wire and cable, textile, fiber, rubber, ceramics, food, mechanical packaging, geo-textile, film, wood, paper and other industries and quality supervision department, and it also can be used in college for teaching demonstration.
2. Features of testing machine
1) Adopting aluminum alloy cover, with attractive streamline structure
2) Mainly used to test mechanical properties for metal, non-metal and composite materials
3) Adopting precision auto control and data acquisition system to realize fully digital adjustment to data acquisition and control process. During test, it can test max. Bearing tensile force, compression force, tensile strength, deformation, elongation, yield point and other technical specifications
4) After test, the above parameters can be calculated automatically through main controller according to the test parameters, which are set before test and meantime display the corresponding test results. All test parameters can be saved and inquired after test, also can be printed out.
5) With remote control box to realize speed adjustment of crossbeam, flexibly and freely switched
6) With functions of automatic return to original position, intelligently, efficiently, quickly
7) With limit position function of any working position and over voltage, over current protection functions, reliable and safe
8) With many control modes of constant speed control to force, stress, deformation, strain and low cycle and user self-programming control
9) Switch among many test curves: stress-strain curve, load-deformation curve, load-displacement curve, load-time curve, deformation-time curve, displacement-time curve. Partial enlargement, overlap and comparison.
The Universal Testing Machine is suitable to be used in:
1) production lines, where the operator has to be fast and efficient, and accurately control the test,
2) testing lab environments, where using the advanced software, the users can analyze the test data, have full control on processing, filling, and test management.
The Universal Testing Machine(UTM) is used to test the tensile and compressive strength, flexural and bending strength and shearing strength of materials. The UTM can perform many different varieties of tests on an equally diverse range of materials, components, and structures such as iron, steel, steel bar, rebar, rod, spring steel, wire, cable and so on. Our UTM models are modular and can be adapted to fit the customerâ??s requirements.
The UTM can accommodate many kinds of materials, ranging from hard samples, such as metals and concrete, to flexible samples, such as rubber and textiles. This makes the universal testing machine equally applicable to virtually any manufacturing industry.
The universal testing machine can evaluate materials properties such as tensile strength, elasticity, compression strength, yield strength, elastic and plastic deformation, bending strength and strain hardening. Different models of universal testing machine have different capacities, some as low as 100N and others as high as 3000KN.
High stiffness of the leading screw and robust crosshead structure, maximum elimination the effection of load frame deformation;
Matched with various test fixture, like peal, puncture, tear, pneumatic grip, belt tension etc., this UTM can be used to metal, non-metal, composite material like rubber, steel wire, plasitc, seat belt, textile character test.
The universal testing machine is suitable to be used in:
1) production lines, where the operator has to be fast and efficient, and accurately control the test,
2) testing lab environments, where using the advanced software, the users can analyze the test data, have full control on processing, filling, and test management.
The universal testing machine(utm) is used to test the tensile and compressive strength, flexural and bending strength and shearing strength of materials. The utm can perform many different varieties of tests on an equally diverse range of materials, components, and structures such as iron, steel, steel bar, rebar, rod, spring steel, wire, cable and so on. Our utm models are modular and can be adapted to fit the customers requirements.
The utm can accommodate many kinds of materials, ranging from hard samples, such as metals and concrete, to flexible samples, such as rubber and textiles. This makes the universal testing machine equally applicable to virtually any manufacturing industry.
The universal testing machine can evaluate materials properties such as tensile strength, elasticity, compression strength, yield strength, elastic and plastic deformation, bending strength and strain hardening. Different models of universal testing machine have different capacities, some as low as 100n and others as high as 3000kn.
High stiffness of the leading screw and robust crosshead structure, maximum elimination the effection of load frame deformation;
Matched with various test fixture, like peal, puncture, tear, pneumatic grip, belt tension etc., this utm can be used to metal, non-metal, composite material like rubber, steel wire, plasitc, seat belt, textile character test.
1. Applications of testing machine
This machine is applicable to metal, cementing compound, tubes, sectional bars, aerospace, petrochemical, waterproof rolls, wire and cable, textile, fiber, rubber, ceramics, food, mechanical packaging, geo-textile, film, wood, paper and other industries and quality supervision department, and it also can be used in college for teaching demonstration.
2. Features of testing machine
1) adopting aluminum alloy cover, with attractive streamline structure
2) mainly used to test mechanical properties for metal, non-metal and composite materials
3) adopting precision auto control and data acquisition system to realize fully digital adjustment to data acquisition and control process. During test, it can test max. Bearing tensile force, compression force, tensile strength, deformation, elongation, yield point and other technical specifications
4) after test, the above parameters can be calculated automatically through main controller according to the test parameters, which are set before test and meantime display the corresponding test results. All test parameters can be saved and inquired after test, also can be printed out.
5) with remote control box to realize speed adjustment of crossbeam, flexibly and freely switched
6) with functions of automatic return to original position, intelligently, efficiently, quickly
7) with limit position function of any working position and over voltage, over current protection functions, reliable and safe
8) with many control modes of constant speed control to force, stress, deformation, strain and low cycle and user self-programming control
9) switch among many test curves: stress-strain curve, load-deformation curve, load-displacement curve, load-time curve, deformation-time curve, displacement-time curve. Partial enlargement, overlap and comparison.
1.Instructions
Zc3-a concrete test hammer, in accordance with jgj/t23 technical regulations, is used for detecting the concrete compressive strength within the range of 10-60mpa and has the system standard energy of 2.207j. The medium-sized resiliometer with pointer direct-reading type indication system is manufactured under the supervision of the chief formulation unit of national regulations on measurement and verification of concrete resiliometers (jjg817) and the technical regulations on rebound-method detection of concrete compressive strength, the industry standard.
2.Main specification
Length of pointer20.0.2(mm)
Friction force of pointer0.650.15(n)
Spherical radius of bounce rod end251.0(mm)
Stiffness of bounce tension spring785.30.0(n/m)
Decoupling position of bounce hammer00n scale line
Impact length of bounce hammer750.3
Takeoff position of bounce hamme0n graduated scale
Fixed value of steel anvil82 (80-81 for our delivery products)
Dm200concrete water testing instrument adopted the high frequency principle based on the introduction of the most advanced technology from foreign country. In other words, there is a fixed frequency inside the equipment. Once the moisture of the detected objects carried, the frequency through the sensor will be different. The deference between the frequencies will be displayed in figure after the conversion by current-frequency converter.
Dm200 concrete moisture meterwork principle
This instrument adopted the high frequency principle based on the introduction of the most advanced technology from foreign country. In other words, there is a fixed frequency inside the equipment. Once the moisture of the detected objects carried, the frequency through the sensor will be different. The deference between the frequencies will be displayed in figure after the conversion by current-frequency converter.
Dm200 concrete moisture meter specification
Its integrative design convenientto carry outside for testing.
Digital display with back light gives exact and clearly reading although you stay at the somber conditions.
It is small in size, light in weight , easy to carry out for fieldwork if needed.
Manual off at any time .Auto power off after 5 minutes from last operation.
Specification
Display:4 digital lcd
Measuring range 0%-80%
Operating conditions:
Temperature:0-60
Humidity:5%-90%
Resolusion:0.1
Accuracy: â± 0.5%n
Power supply:
9v battery (6f22)
Dimensions:
160mm60mm25mm
Weight:203g (not including batteries)
1.Application
Used to determine friction coefficients of road surface, airport runway, marking paint, etc., and to determine the friction coefficients of typical road surfaces to provide a basis for various tire compounds. The tester is characterized by convenient debugging, simple operation, less impact on traffic during measuring, more stable data, and usage in both indoor and outdoor circumstances.
2.Technical parameters
Weight of pendulum150030g
Distance between pendulum to its center of gravity4105mm
Static pressure of rubber slide to pavement2263g
Pendulum head slide at 5, swing to stop timesnot less than 70 times
Normal static pressure of rubber slide to the edge of the rubber slide:510mm
Weight14kg
