Applicable fiber SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653), NZDS (ITU-T G.655), others(including G.657)
Cladding diameter 80 -150m
Coating diameter 160 -900
Typical splice loss SM 0.02dB, MM 0.01dB, DS 0.04dB, NZDS 0.04dB
Return loss
Technical Specifications1
Wavelength (nm) 1310/1550
Dynamic range (dB)2 38/36, 32/30
Pulse width (ns) 5,20,40,80,160,320,640,1280,2560,5120,10240,20480
Event blind zone (m)3 2m
Attenuation blind zone (m)3 9m
Linearity (dB/dB) ±0.05 dB/ dB
Loss threshold (dB) 0.05
Loss resolution ratio (dB) 0.01
Sampling resolution ratio (m) 0.125 to 8
Sampling point 32K
Distance uncertainty (m) ±(1 m + 510-5 distance + sampling interval)
Distance scope (km) 0.3 to180
Typical real-time refreshing duration (s) 0.2
Memory capacity of trace SD Card (2G), > 10000 pieces
Duration of measurement Defined by user; 5sec, 10sec, 15sec, 30sec, 1min, 2min, and 3min are selectable
General specification
Dimension (HWD) 15023566
Weight 1.5kg
Temperature Running temperature -10 to 50
Memory temperature -40 to 70
Relative humidity 0% to 95% (non condensation)
Power supply Lithium battery; continuing working duration ?¥ 8 hours
Warranty period 12 months
Remarks: 1. The technical specification describes the ensured performance of the instrument when using typical PC model connector to measure. Without considering the uncertainty caused by optical fiber refractivity.2. Dynamic range is the data measured under the condition of the maximum pulse width and 3 minutes of average time. Dynamic range is the data measured under the condition of 180km/20480ns/3min.
3. Measuring conditions of blind zone: reflection event is within 4Km, reflection strength < -35dB. Measured by the minimum pulse width.
Wavelength(nm) 800~1700nm
Detector InGaAs
Measurement? Range (dBm) -70~+3 -50~+26
Uncertainty ±5%
Calibrated Wavelength(nm) 850,1300,1310,1490,1550,1625
Resolution(dB) 0.01
Optical Connector FC(interchangeable SC,ST) / as well as 2.5mm universal
Power Supply Alkaline Battery(3 AA 1.5V batteries)
Battery Operating Time 240 h with 1.5V Battery(3)
Operating Temperature() -10 ~ +60
Storage Temperature() -25 ~ +70
Relative Humidity 0 to 95% (non-condensing)
Dimension(mm) 200 X90 X50
Weight(g) 285
Operating wavelength(nm) 1310/1550 (others specify on requests, Max wavelength is 5
Applicable fiber SM ,MM
Laser type FP-LD(others specify on requests)
Maximum Output Power(dBm) -7(can be adjustable, others specify)
Stability(dB, 15min, 20) ±0.1
Stability(dB, 30min, 20) ±0.05
Modulation(Hz) CW, 270, 1K, 2K
Fiber Port FC/PC or FC,SC,ST interchangeable
Alkaline Battery 3XAA, 1.5V
Battery Operating time(h) 45
Operation Temperature() -10+60
Storage Temperature() -25+70
Outline sizemm 200 X90 X50
Weight(g) 285
Small, light, long battery life
4 motors accurate core alignment
250 times magnification of fiber cores
7s fast splicing, 26s intelligent heating
More than 4000 times electrodes discharging
4400mAh Li-battery, 220 cycles splicing and heating
Inductive automatic heater, not heating without fibers
3 in 1 multi-function clamps, new waterproof structure
Apply to bare fibers, drop cables and jumper wires splicing
Bare fiber diameter 125m
Outercoat diameter 0.25mm-0.9mm
Fiber type Single tube fiber and Ribbon fiber(exchangeab
Cleaved length 5-30mm
Cleaved angle 0.5°
blade life 48000
Mode Semiautomatic
Dimension 59mm(W)55mm(D)49mm(H)
Weight 257g
Central Wavelength 650nm±10nm
Emitter Type FP-LD
Output Power 1mw or 10mw
Optical Connector 2.5mm universal connectorFor 1.25mm connectors, FC-1.25mm Hybrid adaptor
can be optional on customer requests
Operating Model Both CW and Pulse(2Hz) available
Power Supply Two AAA alkaline batteries
Battery Operating Time 650nm@1mw 45hours;650nm@10mw15hoursTest with Panasonic LR6 AAA ALKALINE battery
Operating Temperature -10~+60 ()
Storage Temperature -25~+70 ()
Dimension (mm) 115*45*27
Weight 50g(Without Batteries)
Operating Wavelength 1550nm1310nm Optional
Fiber Type 9/125um SM Fiber
Optical Connector Type FC/PC
Detector Type InGaAs
Peak Power of laser(mw) 60
Max. Displaying Distance Reflection Event(km) 60 (1dB)
Non-reflection Event(km) 20 (2.5dB)
Measurement Unit M
Reflection Event Dead Zone 15m
Distance AccuracyReflection Event ±2m+2*10-4X Distance
Wavelength of VFL Option(nm) 650
Output Power of VFL Option(mW) >=1
Date storage capacity 1000
Communication Port USB
Power Supply Alkaline Battery (3pcs AA 4.5V Batteries)
Battery Operating Time 5000 measurements
Working Temperature() -5~40
Storage Temperature() -10~60
Humidity 0~85%Non-condensation
Dimensions(mm) 200 X 90 X 50
Weightg 320
Model PON power meter
1310nm 1490nm 1550nm
Pass Zone(nm) 12601360 14701505 15351570
Isolation (dB) >40@1490 >30@1310 >40@1310
Isolation(dB) >40@1550 >40@1550 >40@1490
Measurement Range(dBm) -40+10 -40+10 -40+20
Measurement Accuracy
Connatural uncertainty(dB) ±0.5
Linearity(dB) ±0.1
Passing through insertion Loss(dB)
Applicable fiber SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653), NZDS (ITU-T G.655), others(including G.657)
Cladding diameter 80 -150m
Coating diameter 160 900m
Typical splice loss SM 0.02dB, MM 0.01dB, DS 0.04dB, NZDS 0.04dB
Return loss
Applicable fiber SM(G.652), MM(G.651), DS(G.653), NZDS(G.655), others(including G.657)
Fiber count Single
Applicable fiber dimensions Cladding diameter: 80 -150m, Coating diameter: 160 -900m
Typical splice loss 0.02dB(SM), 0.01dB(MM), 0.04dB(DS), 0.04dB(NZDS)
Return loss >60db
Fiber cleaved length 10-16mm (coating diameter< 250m ), 16mm(coating diameter: 250-1000m )
Splicing program 40 groups
Operate mode Manual, Automatic
Auto-heating Available
Typical splicing time 8 seconds
Tube heating time 26 seconds for 60mm and 40mm shrinkable sleeves
Fiber view magnification 250X(X or Y view), 125X(X and Y view)
Viewing method and display 2 CMOS cameras, 4.3 inch color LCD monitor
Storage of splice result 4000 results
Loss evaluation Available
Tension test 1.8-2.2N
Interface GUI menu interface, easier operation
Battery capacity 5800mAh, typical 180 cycles(splice and tube heat), pluggable inner Li-battery
Power supply Adaptor, input: AC100-240V(50/60HZ)
Electrode life More than 4000 ARC discharges, can be replaced conveniently
Terminals USB 2.0 port, for uploading splice results and upgrading software
Operating condition Altitude: 0-5000m, Humidity: 0-95%, Temperature: -10â??ï½?+50â??;Wind speed: max 15m/s
Dimension 149mm(L)x120mm(W)x127mm(H)
Weight 1.9kg including battery
Applicable fiber SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653), NZDS (ITU-T G.655), others(including G.657)
Cladding diameter 80 -150m
Coating diameter 160 -900
Typical splice loss SM 0.02dB, MM 0.01dB, DS 0.04dB, NZDS 0.04dB
Return loss
Identified Wavelength Range 800-1700 nm
Identified Signal Type CW, 270Hz±5%1kHz±5%2kHz±5%
Detector Type 1mm InGaAs 2pcs
Adapter Type 0.25 , 0.9, 2.0, 3.0
Signal Direction Left & Right LED
Singe Direction Test Range(dBm, CW/0.9mm bare fiber) -46~10(1310nm)
-50~10(1550nm)
Signal Power Test Range(dBm, CW/0.9mm bare fiber) -50~+10
Signal Frequency Display (Hz) 270, 1k, 2k
Frequency Test Range(dBm, Average Value) 0.9, 2.0, 3.0 -30~0 (270Hz,1KHz)
-25~0 (2KHz)
0.25 -25~0 (1KHz,2KHz)
-20~0 (2KHz)
Insertion Loss(dB, Typical Value) 0.8 (1310nm)
2.5 (1550nm)
Alkaline Battery(V) 2pcs AAA batteries
Operating Temperature() -10�+60
Storage Temperature() -25�+70
Dimension (mm) 196X30.5X27
Weight (g) 195
NO. Name Type Qty Producing Area Purpose
1 Mark pen ZEBRA 120 1 Japan Marking
2 Test pencil HR-28 1 Taiwan Test electricty
3 Knife SATA 93423 1 US Cutting
4 Hacksaws SATA 93404 1 US Saw the fiber cable
5 3M Tapeline DL9003 1 Taiwan Measuring the length of fiber cable
6 Tweezers CT-10 1 US Hold tiny object.
7 Straight Screwdriver STANLEY 1 US Fastening screw
8 Crosshead screwdriver STANLEY 1 US Fastening screw
9 Blade SATA 93434 1 box US Knife
10 Wire cutters CT-395 1 US Strip off fiber cable
11 Vice CT-106 1 US Niping powerful core of fiber cable
12 Fiber reamer HANS-W 1 US Peeling the coat of fiber
13 Cleaning air ball CT-35 1 US Cleaning the lens of fusion splicer
14 Fiber coat stripper CFS-2 1 US Peeling the coat of fiber
15 inner hexagon spanner CR-V 1 US Fastening screw
16 Acuate clamp CT-336 1 US Accessorial tool for splicing
17 monkey wrench CT-26 1 US Accessorial tool for splicing
18 electrical insulating tape PVE 1 China Splice connection
19 Heat-shrink tube FPS-1 2 box China Protect the connection of fibers
20 Alcohol pump bottle CT-40 1 US Cleaning the fiber
21 Powerful? bolt cutters CT-392 1 US Cut fiber cable
22 Tool box TC-200B 1 China
6s typically for splicing and 26s for heating
Fiber core max. magnifications up to 250X
Electrodes discharging more than 4000 times
Integrated heater, easy and convenient to operate.
USB port for software updating and data records exporting
PAS image digital processing system, core to core alignment.
ARC calibrated by temperature and air pressure automatically
360° rubber armor protects machine from shock, water and dust.
5800mAh and pluggable Li-battery, typical 200 cycles splicing and heating.
Multi-function holder clamps, suitable for bare fibers, skin line cables, jumper cables etc.
