1. Gypsum powder quality standard: in compliance with GB/T 9776-2008
2. Main Technology(here take Nature gypsum rock as example)
Gypsum rock - first crushing -second crushing - grinding - calcining - aging -finished products (CaSO4.1/2H2O)
After being heated and calcined with certain temperature,natural dihydrate gypsum is dehydrated and decompounded,to get the product whose major component is semi-hydrated gypsum(CaSO4.1/2H2O),that is,calained gypsum(generally slaked gypsum).According to different temperatures and pressure conditions during dehydration decomposition,the obtained product is β-Type calcined gypsum.Basic process of mechanized prouduction includes five large systems:gypsum grinding,automatic measuring system,calcination system,heat supply system,and aging&packing system.According to client's requirement,gypsum crushing system can be added to crush large gypsum rock to be with size of 0-30mm,and then conveyed into grinding system.
3.Payment conditions:
A. Payment terms: 30% T/T in advance; 70%L/C or T/T
B. We can provide quality guarantee;
C. Kunlun bank account available to make convenient for Iranian client
National Standard of Calcined Gypsum
Standard No.: GB/T 9776-2008
Scope of application:
Gelled material made by dehydrating natural gypsum(raw material). Its main component isβ-GaSO4·1/2H2O, without any admixture or additive.
The natural gypsum should be in conformity with requirements of "gypsum rock(JC/T700) for making cementing material" gypsum rock of Grade 3 or more higher grades.
Classification:
It is classified to be three grades: 3.0,2.0,and 1.6 according to its 2h strength(breaking strength).
Composition:
β-GaSO4·1/2H2O content(mass fraction) in Calcined gypsum should be not less than 60.0%.
1. Gypsum powder quality standard: in compliance with GB/T 9776-2008
2. Main Technology(here take Nature gypsum rock as example)
Gypsum rock - first crushing -second crushing - grinding - calcining - aging -finished products (CaSO4.1/2H2O)
After being heated and calcined with certain temperature,natural dihydrate gypsum is dehydrated and decompounded,to get the product whose major component is semi-hydrated gypsum(CaSO4.1/2H2O),that is,calained gypsum(generally slaked gypsum).According to different temperatures and pressure conditions during dehydration decomposition,the obtained product is β-Type calcined gypsum.Basic process of mechanized prouduction includes five large systems:gypsum grinding,automatic measuring system,calcination system,heat supply system,and aging&packing system.According to client's requirement,gypsum crushing system can be added to crush large gypsum rock to be with size of 0-30mm,and then conveyed into grinding system.
3.Payment conditions:
A. Payment terms: 30% T/T in advance; 70%L/C or T/T
B. We can provide quality guarantee;
C. Kunlun bank account available to make convenient for Iranian client
National Standard of Calcined Gypsum
Standard No.: GB/T 9776-2008
Scope of application:
Gelled material made by dehydrating natural gypsum(raw material). Its main component isβ-GaSO4·1/2H2O, without any admixture or additive.
The natural gypsum should be in conformity with requirements of "gypsum rock(JC/T700) for making cementing material" gypsum rock of Grade 3 or more higher grades.
Classification:
It is classified to be three grades: 3.0,2.0,and 1.6 according to its 2h strength(breaking strength).
Composition:
β-GaSO4·1/2H2O content(mass fraction) in Calcined gypsum should be not less than 60.0%.
1. Gypsum powder quality standard: in compliance with GB/T 9776-2008
2. Main Technology(here take Nature gypsum rock as example)
Gypsum rock - first crushing -second crushing - grinding - calcining - aging -finished products (CaSO4.1/2H2O)
After being heated and calcined with certain temperature,natural dihydrate gypsum is dehydrated and decompounded,to get the product whose major component is semi-hydrated gypsum(CaSO4.1/2H2O),that is,calained gypsum(generally slaked gypsum).According to different temperatures and pressure conditions during dehydration decomposition,the obtained product is β-Type calcined gypsum.Basic process of mechanized prouduction includes five large systems:gypsum grinding,automatic measuring system,calcination system,heat supply system,and aging&packing system.According to client's requirement,gypsum crushing system can be added to crush large gypsum rock to be with size of 0-30mm,and then conveyed into grinding system.
3.Payment conditions:
A. Payment terms: 30% T/T in advance; 70%L/C or T/T
B. We can provide quality guarantee;
C. Kunlun bank account available to make convenient for Iranian client
National Standard of Calcined Gypsum
Standard No.: GB/T 9776-2008
Scope of application:
Gelled material made by dehydrating natural gypsum(raw material). Its main component isβ-GaSO4·1/2H2O, without any admixture or additive.
The natural gypsum should be in conformity with requirements of "gypsum rock(JC/T700) for making cementing material" gypsum rock of Grade 3 or more higher grades.
Classification:
It is classified to be three grades: 3.0,2.0,and 1.6 according to its 2h strength(breaking strength).
Composition:
β-GaSO4·1/2H2O content(mass fraction) in Calcined gypsum should be not less than 60.0%.
1. Gypsum powder quality standard: in compliance with GB/T 9776-2008
2. Main Technology(here take Nature gypsum rock as example)
Gypsum rock - first crushing -second crushing - grinding - calcining - aging -finished products (CaSO4.1/2H2O)
After being heated and calcined with certain temperature,natural dihydrate gypsum is dehydrated and decompounded,to get the product whose major component is semi-hydrated gypsum(CaSO4.1/2H2O),that is,calained gypsum(generally slaked gypsum).According to different temperatures and pressure conditions during dehydration decomposition,the obtained product is β-Type calcined gypsum.Basic process of mechanized prouduction includes five large systems:gypsum grinding,automatic measuring system,calcination system,heat supply system,and aging&packing system.According to client's requirement,gypsum crushing system can be added to crush large gypsum rock to be with size of 0-30mm,and then conveyed into grinding system.
3.Payment conditions:
A. Payment terms: 30% T/T in advance; 70%L/C or T/T
B. We can provide quality guarantee;
C. Kunlun bank account available to make convenient for Iranian client
National Standard of Calcined Gypsum
Standard No.: GB/T 9776-2008
Scope of application:
Gelled material made by dehydrating natural gypsum(raw material). Its main component isβ-GaSO4·1/2H2O, without any admixture or additive.
The natural gypsum should be in conformity with requirements of "gypsum rock(JC/T700) for making cementing material" gypsum rock of Grade 3 or more higher grades.
Classification:
It is classified to be three grades: 3.0,2.0,and 1.6 according to its 2h strength(breaking strength).
Composition:
β-GaSO4·1/2H2O content(mass fraction) in Calcined gypsum should be not less than 60.0%.
Capacity
100,000m2/y-450,000m2/y
Automation
Full automatic
Fuel
Natural gas, heavy oil, coal and diesel
Drying method
Dry by air
Hot air stove drying system
Main raw materials
Gypsum powder, water
Product dimension
Thickness: 70mm-200mm
Width: 300mm-500mm( adjustable)
Length: 620mm,666mm
We can design and manufacture products of other dimensions as clients'special requirement
Standard of product quality
In conformity with national standard JC/T698-2010
Capacity
100,000m2/y-450,000m2/y
Automation
Full automatic
Fuel
Natural gas, heavy oil, coal and diesel
Drying method
Dry by air
Hot air stove drying system
Main raw materials
Gypsum powder, water
Product dimension
Thickness: 70mm-200mm
Width: 300mm-500mm( adjustable)
Length: 620mm,666mm
We can design and manufacture products of other dimensions as clients'special requirement
Standard of product quality
In conformity with national standard JC/T698-2010
1. Capacity: 50, 000 ~300, 000 m3/y;
Based on 300 working days/year, 2 shifts/day;
2. Raw material: sand(fly ash), cement, lime, gypsum, aluminum powder;
3. Fuel: coal, natural gas, diesel or heavy oil;
4. Product dimension:
Length: 600
Width: 60~360 or 50-250
Height: 200, 240, 250, 300
The other dimensions can be designed according to the special requirement from clients.
5. Product quality standard:
The product is in conformity with standard of grade b05~b08 stipulated in gb/t11968-2006.
6. Main production process:
A. Raw material storage&treatment
B. Mixing&casting
C. Cutting&grouping
D. Steam curing&leaving autoclave
E. Motherboard returning & treatment.
1. Annual output:
5million to 30 million sqm(based on thickness of 9.5mm gypsum board)
2. Working time: 24hours/day and 300 working days/year
3. Raw material: Gypsum powder, shielding paper, modified starch, foaming agent, glue
4. Fuel: Natural gas, diesel, heavy oil or coal
5. Product quality and specification:
1) The product is in compliance with National Standard GB/T9775-2008
2) Product specification:
Length: 2400mm~3600mm
Width: 1200mm or 1220mm
Thickness: 8mm-20mm
6. Main process:
1)Raw material blending;
2)Shaping;
3)Wet board/panel conveying;
4)Drying;
5)Dry board/panel conveying;
6)Finished product stacking and storage.
7. Main technology:
The production line adopts special designed hot air stove heating system
8.Raw material consumption list:
(Based on 9.5 mm gypsum board for reference)
Capacity
100,000m2/y-450,000m2/y
Automation
Full automatic
Fuel
Natural gas, heavy oil, coal and diesel
Drying method
Dry by air
Hot air stove drying system
Main raw materials
Gypsum powder, water
Product dimension
Thickness: 70mm-200mm
Width: 300mm-500mm( adjustable)
Length: 620mm,666mm
We can design and manufacture products of other dimensions as clients'special requirement
Standard of product quality
In conformity with national standard JC/T698-2010
1. Gypsum powder quality standard: in compliance with GB/T 9776-2008
2. Main Technology(here take Nature gypsum rock as example)
Gypsum rock - first crushing -second crushing - grinding - calcining - aging -finished products (CaSO4.1/2H2O)
After being heated and calcined with certain temperature,natural dihydrate gypsum is dehydrated and decompounded,to get the product whose major component is semi-hydrated gypsum(CaSO4.1/2H2O),that is,calained gypsum(generally slaked gypsum).According to different temperatures and pressure conditions during dehydration decomposition,the obtained product is β-Type calcined gypsum.Basic process of mechanized prouduction includes five large systems:gypsum grinding,automatic measuring system,calcination system,heat supply system,and aging&packing system.According to client's requirement,gypsum crushing system can be added to crush large gypsum rock to be with size of 0-30mm,and then conveyed into grinding system.
3.Payment conditions:
A. Payment terms: 30% T/T in advance; 70%L/C or T/T
B. We can provide quality guarantee;
C. Kunlun bank account available to make convenient for Iranian client
National Standard of Calcined Gypsum
Standard No.: GB/T 9776-2008
Scope of application:
Gelled material made by dehydrating natural gypsum(raw material). Its main component isβ-GaSO4·1/2H2O, without any admixture or additive.
The natural gypsum should be in conformity with requirements of "gypsum rock(JC/T700) for making cementing material" gypsum rock of Grade 3 or more higher grades.
Classification:
It is classified to be three grades: 3.0,2.0,and 1.6 according to its 2h strength(breaking strength).
Composition:
β-GaSO4·1/2H2O content(mass fraction) in Calcined gypsum should be not less than 60.0%.
1. Annual output:
5million to 30 million sqm(based on thickness of 9.5mm gypsum board)
2. Working time: 24hours/day and 300 working days/year
3. Raw material: Gypsum powder, shielding paper, modified starch, foaming agent, glue
4. Fuel: Natural gas, diesel, heavy oil or coal
5. Product quality and specification:
1) The product is in compliance with National Standard GB/T9775-2008
2) Product specification:
Length: 2400mm~3600mm
Width: 1200mm or 1220mm
Thickness: 8mm-20mm
6. Main process:
1)Raw material blending;
2)Shaping;
3)Wet board/panel conveying;
4)Drying;
5)Dry board/panel conveying;
6)Finished product stacking and storage.
7. Main technology:
The production line adopts special designed hot air stove heating system
8.Raw material consumption list:
(Based on 9.5 mm gypsum board for reference)
Till now, we've manufactured and supplied complete sets of machine lines to Russia, Oman, Uzbekistan,United Arab Emirates, Iran.
Payment conditions:
30% (USD) prepaid by T/T as down payment;
70% by irrevocable L/C at sight
a).65% shall be paid against shipping documents at sight.
b).5% shall be paid against performance guarantee at sight.
What's more , Kunlun bank account available to make convenient for Iranian clients
1. Type of Production Line
Production capacity: 6 million sqm/year (Calculate by 24hrs/day and 300 working days per year)
Power: 380V/50Hz; 3 phase
Size of boards (L*W):1220mm*1830mm;
Size of Finished product (L*W): 600mm*600mm
Thickness:6-12 mm
Films on front side of board: PVC films
Films on back side of board: Aluminum films
3. Description of Machines
3.1Double-Side laminating Machine
It includes gluing device,rolling device and flattening device. It can work with two side (front side PVC film, back side aluminum film) at same time, no need to turn it over. It is widely used for coating the surface of density board, multilayer plywood, joinery board, glass, acrylic, mosaic,all kinds of flat plate.
3.2 Dividing and Cutting Machine
It includes vertical saw, horizontal saw, conveyor roller way, board-pushing device and so on. It also includes dust collecting system. Easy to operate, can divide and cut board into small pieces simply. With dust collector then make the working environment much cleaner.
3.3 Edge-Sealing Machine
PLC and HMI control system, it can produce quickly and stably, with high efficiency; It is the professional edge sealing equipment which makes ceiling tiles.
3.4 Thermoplastic Packing Machine
It includes two parts: edge sealing&cutting machine and shrinking machine, the product will be covered films and cut automatically, then go through shrinking machine and finish packing.
1. Type of Production Line
Production capacity: 6 million sqm/year (Calculate by 24hrs/day and 300 working days per year)
Power: 380V/50Hz; 3 phase
Size of boards (L*W):1220mm*1830mm;
Size of Finished product (L*W): 600mm*600mm
Thickness:6-12 mm
Films on front side of board: PVC films
Films on back side of board: Aluminum films
3. Description of Machines
3.1Double-Side laminating Machine
It includes gluing device,rolling device and flattening device. It can work with two side (front side PVC film, back side aluminum film) at same time, no need to turn it over. It is widely used for coating the surface of density board, multilayer plywood, joinery board, glass, acrylic, mosaic,all kinds of flat plate.
3.2 Dividing and Cutting Machine
It includes vertical saw, horizontal saw, conveyor roller way, board-pushing device and so on. It also includes dust collecting system. Easy to operate, can divide and cut board into small pieces simply. With dust collector then make the working environment much cleaner.
3.3 Edge-Sealing Machine
PLC and HMI control system, it can produce quickly and stably, with high efficiency; It is the professional edge sealing equipment which makes ceiling tiles.
3.4 Thermoplastic Packing Machine
It includes two parts: edge sealing&cutting machine and shrinking machine, the product will be covered films and cut automatically, then go through shrinking machine and finish packing.
1. Annual output:
5million to 30 million sqm(based on thickness of 9.5mm gypsum board)
2. Working time: 24hours/day and 300 working days/year
3. Raw material: Gypsum powder, shielding paper, modified starch, foaming agent, glue
4. Fuel: Natural gas, diesel, heavy oil or coal
5. Product quality and specification:
1) The product is in compliance with National Standard GB/T9775-2008
2) Product specification:
Length: 2400mm~3600mm
Width: 1200mm or 1220mm
Thickness: 8mm-20mm
6. Main process:
1)Raw material blending;
2)Shaping;
3)Wet board/panel conveying;
4)Drying;
5)Dry board/panel conveying;
6)Finished product stacking and storage.
7. Main technology:
The production line adopts special designed hot air stove heating system
8.Raw material consumption list:
(Based on 9.5 mm gypsum board for reference)
1. Annual output:
5million to 30 million sqm(based on thickness of 9.5mm gypsum board)
2. Working time: 24hours/day and 300 working days/year
3. Raw material: Gypsum powder, shielding paper, modified starch, foaming agent, glue
4. Fuel: Natural gas, diesel, heavy oil or coal
5. Product quality and specification:
1) The product is in compliance with National Standard GB/T9775-2008
2) Product specification:
Length: 2400mm~3600mm
Width: 1200mm or 1220mm
Thickness: 8mm-20mm
6. Main process:
1)Raw material blending;
2)Shaping;
3)Wet board/panel conveying;
4)Drying;
5)Dry board/panel conveying;
6)Finished product stacking and storage.
7. Main technology:
The production line adopts special designed hot air stove heating system
8.Raw material consumption list:
(Based on 9.5 mm gypsum board for reference)
1. Annual output:
5million to 30 million sqm(based on thickness of 9.5mm gypsum board)
2. Working time: 24hours/day and 300 working days/year
3. Raw material: Gypsum powder, shielding paper, modified starch, foaming agent, glue
4. Fuel: Natural gas, diesel, heavy oil or coal
5. Product quality and specification:
1) The product is in compliance with National Standard GB/T9775-2008
2) Product specification:
Length: 2400mm~3600mm
Width: 1200mm or 1220mm
Thickness: 8mm-20mm
6. Main process:
1)Raw material blending;
2)Shaping;
3)Wet board/panel conveying;
4)Drying;
5)Dry board/panel conveying;
6)Finished product stacking and storage.
7. Main technology:
The production line adopts special designed hot air stove heating system
8.Raw material consumption list:
(Based on 9.5 mm gypsum board for reference)
Capacity:
2 million m2/y~50 million m2/y (thickness of 9.5mm)
Automation:
Full automatic
Drying system:
Hot air stove drying system
Fuel:
Natural gas, heavy oil, coal and diesel
Main raw materials:
Gypsum powder, modified starch, foaming agent, glue and protective paper
Dimension of final product:
Thickness: 8mm-20mm.
