We are leading manufacturers & suppliers of best quality OPZS cells in India.
Microtex OPzS Batteries are used in Power Generating Stations, Sub Stations, nuclear power plants, Off Shore rigs and petrochemical plants for critical standby power. These are special tubular plate flooded lead acid batteries made with unique calcium alloys and designed to perform in both high cycling and float applications, ready to deliver, the full capacity at the critical moment when it is required.
They are housed in distinctive High Impact Transparent SAN (Styrene AcryloNitrile) containers to visually inspect condition of plates inside the cell.
Batteries are optimally designed with balanced active materials to provide a 20 year float life.
Key Features:
Specially designed Calcium lead alloys for positive and Low antimony selenium alloys negative grids, provides better current conductivity to the terminals with lower internal resistance. Presence of Tin and special grain refiners ensure a high performance plates resistant to grid corrosion.
The special Calcium alloys prevent water loss and reduces the watering intervals in usage, this is a big positive factor for the maintenance team
High efficiency with accurate and optimum balanced active materials, provide consistent capacity reliably.
Tubular Spine grids with a Diameter 3.20 mm cast at over 150 bar pressure in high Pressure Die casting machines for positive plates, ensures the lead is packed with high density which resists acid corrosion - ensures the life of 20 years in the positive plates which usually are otherwise prone to corrosion.
Designer Ceramic Vent plugs to trap water and allow only gases to pass through minimizes water loss in the cell.
High impact ABS cover with large polarity indication enhances cell safety and easy visual of terminal polarity
Hardened lead alloy with copper insert terminal posts â?? provide faster conductivity and fail proof connections requiring less maintenance
Patent applied for, Smart Terminal pole bushing with rubber grommets, stops acid creep and corrosion and allows for movement upwards due to the natural growth of positive terminal which usually occurs after the 7th year of service, ensuring no breakage of cover in its designed service life.
Batteries are supplied with factory pre formed plates. This ensure for reliable performance and no excess cycling required in the field to obtain rated capacity. Saves time for critical users.
Batteries if required can be supplied with Seismic qualified stands with special acid proof coating.
Microtex OPzS Batteries generally conform to DIN 40 736 part 1, IS1651-1993, Tests according to IEC 60 896-11 and safety standards, ventilation DIN EN 50 272-2
Microtex is an ISO 9001 and ISO 14001 certified company
Microtex stationary vrla opzv cells are maintenance free gel lead - acid type with long life. In applications with high requirements of operational safety and bridging times of 1 h to more than 10 h. 20 years in standby float operation at 27 °c. Maintenance free. No topping-up water during the operational life. Microtex opzv cells are maintenance free gel lead-acid type with long life. In applications with high requirements of operational safety and bridging times of 1 h to more than 10 h the microtex opzv is the right choice.
Microtex stationary opzv cells are used in telecommunication sectors, for emergency lighting, for microwave radio and solar photovoltaic systems and also in power generating plants.
Charging:
Iu-characteristic-
Imax without limitation
U=2.25v/cell +/-1%, between 10 °c and 45 °c
U/t= -0.003 v/k
Float current: 20-30 ma/100 ah
Discharge characteristics:
Reference temperature: 25 °c
Initial capacity: 100%
Depth of discharge (dod): normally up to 80%
Deep discharges: more than 80% dod or discharges beyond final discharge voltages (based on discharge rate) have to be avoided
We are leading manufacturers & suppliers of best quality of VRLA AGM Telecom Battery.
We are leading manufacturers & suppliers of best quality of UPS Tubular .
We are leading manufacturers & suppliers of high quality of VRLA TGEL Battery.
Microtex Tubular Gel VRLA batteries for deep cyclic Standby applications in remote Telecom, Solar, Data Centers are heavy duty high performance sealed maintenance free lead acid TUBULAR PLATE Valve Regulated batteries which can withstand deep cycling
Incorporating battery research and design from years of experience and reputed European Battery Scientists, the Eternia series â?? delivers trouble free ultra-long life, with a designed life of 20 years. The Gel making plant imported from Germany produces excellent quality Gel using high-grade German silica critical to the life and performance of the Gel Battery
Microtex with its unique manufacturing facilities, which produce in-house the specially designed lead alloys, lead oxides, grid castings, pasted plates, injection molded containers, multi-tubular gauntlets, PVC separators, produces the complete battery using state of the art industry standard battery making machinery.
Designs are proven and tested for complete life cycle testing to international norms before the batteries are offered to the market. The electrical lab is complete with high-quality LCT from world class suppliers Bitrode and Digatron.
Microtex, Eternia Gel Batteries exported, in various capacities to Australia, New Zealand, Bhutan, and other places have proven their reliability and trustworthiness for dependable power sources in standby applications.
We are leading manufacturers & suppliers of best quality railway batteries in india.
Microtex Valve Regulated Lead Acid Batteries is designed to meet Industrial Standards. The battery works on gas recombination technology, which eliminates the need to top up the batteries with water periodically and is mounted horizontally in robust stack able steel modules. Microtex makes VRLA batteries generally conforms to the following International Standards: IEC 60896-21 ED. 1.0 B:2004, BS 6290 Part-IV Tec Spec: G/BAT-01/03, March 2004 & IEEE 1188-2005
Features:
Gas recombination technology that eliminates the need to add water periodically
Robust and Aesthetically attractive modular design with thermal control features
High-performance operation with no maintenance
Efficient and Effective Vent valve Assembly
Constructional Highlights:
Flame retardant cell case
Proprietary process technology ideal for all climatic Conditions
Robust & aesthetically attractive modular design with thermal control features
Unique European type wide electrode design
Leak resistant double seal terminal design
Efficient & Effective Vent Valve Assembly
Advantages:
Gas recombination technology that eliminates the need to add water
Installation that is high on convenience is friendly & provides peace of mind
Robust & aesthetically attractive modular design with thermal control feature
Product Range:-
Model Type
Capacity (AH) at C10 rate of discharge
No. of cells per module
Module Voltage
Module Dimensions in mm
Approx module weight in Kg(± 5%)
Internal resistance of cell in milliohms
short circuit current in KA
Length (±15 mm)
Depth (±15 mm)
Height (±15 mm)
M-100 V
100
6
12 V
655
275
216
60
.95
2.25
M-200 V
200
6
12 V
655
375
216
100
0.73
2.94
M-300 V
300
4
8 V
857
380
141
90
0.56
3.84
M-400 V
400
4
8 V
870
375
180
120
0.47
4.58
M-500 V
500
4
8 V
940
380
235
165
0.42
5.09
M-600 V
600
4
8 V
940
380
235
175
0.32
6.64
We are leading manufacturers of UPS Batteries.
Product Range:-
Battery TypeCapacity in AH at 27 CDimension (In millimeters)+3 mmApprox Weight Kg+5%
C20C10LengthWidthHeight*I DryFilled
MTU 150 TT15012051019441034.261.20
MTU 160 TT16013051019441037.062.80
MTU 200 TT20016051019441045.6072.0
MTU 150 JT15012051022029335.6048.4
MTU 170 JT1701351022029342.6055.4
MTU 200 JT22017551827429351.070.0
Recharging Instruction:
Charge at limit current of 15% of C 10 up to 13.8 V
Current reduced to 300-500 mA and adjust voltage between 13.2 to 13.5
Installation Guide:
Wooden or Plastic (Non-conductive) planks should be used for placing the battery
For 24 V requirement, 2 batteries may be connected in series
Higher Current Requirement series-Parallel connection maybe used
Features:
Proven Tubular Technology
Electrolyte level indicator with in-built Ceramic vent plug
High acid volume per ampere hour
Advantages:
Active material retained within the bags-Longer life
Low Maintenance of battery-Topping up
Suitable for use in areas of frequent power cut
Microtex train lighting batteries for railway applications are manufactured in india by mysore thermo electric private limited for over two decades. Mtepl has a well-established battery division with fully equipped chemical and electrical laboratory at peenya in bangalore.
Microtex train lighting batteries are made up of a number of cells of 2 volts each. The cells assembled in molded monoblock hard rubber containers are connected with welded joints made of lead alloy with an anti-corrosive coating. The microporous vent plugs fitted to the cells prevent the spilling of the electrolyte.
Constructional features:
Each cell is assembled in monoblock hard rubber container containing microtex high performance tubular positive plates in premium energy bags tubular gauntlets, pastes negative plates manufactures under exacting control to withstand rough handling and electrically separated by high quality pe separators
The tubular positive plates have specially designed spines cast from corrosion resistant lead antimony-arsenic alloy ensconced in tabular bag which is vibro-filled with active material and pickled, thus ensuring high rate discharge, more capacity for a given volume, grater shock resistance and long life with excellent reserve capacity
The pasted negative, made up from a blend of oxide, special additives and expander, aid in cell longevity
The high quality pe separators provide high electrical insulation between the plates with low internal resistance for improved battery performance
Short-circuit between plates due to sediments is avoided by the use of sediment spacer at the bottom of the container on which the plates rest
The microporous vent plugs prevent escape of electrolyte. The hard rubber top cover gives a perfect airtight sealing to the cell.
Microtex train lighting cells are dry, uncharged and are low maintenance batteries
Microtex is a Traction battery manufacturer with several decades of experience in the line. Microtex Traction battery suppliers to India and Having exported Lead Acid traction batteries to worldwide from 1977, these are the most reliable batteries for your forklifts and have been produced with passion.
India's most widely used EV Traction battery for battery operated forklifts, stackers and platform trucks
Microtex have exported Forklift Batteries and 2 volt traction cells from 1977 for over 20 years Microtex are also OEM suppliers to Nilkamal Forklifts, and is a preferred supplier, to the Forklift markets in India.
Microtex Forklift Batteries are offered in all British & DIN standards, in welded & Bolt-On terminals, made from 2 volts cells from 42 Ah to 1550 Ah in various configurations as required.
We are leading manufacturers & suppliers of Loco Starter Battery in India.
Microtex lead acid Diesel Loco Starter batteries are manufactured by our associated company. The unit has a well established modern battery manufacturing facility with a fully equipped chemical and electrical laboratory.The cells assembled in either Molded Monoblock Hard Rubber containers or Plastic Containers housed in a Sturdy and Rugged FRP Tray are connected with welded joints made of lead alloy with an anti-corrosive coating. The Microporous Vent Plugs fitted to the cells prevent the loss of electrolyte.
Constructional Features:
Each cell assembled in either Monoblock Hard Rubber container or Rugged FRP Tray, containing Microtex high performance tubular positive plates in premium Energy Bags Acrylic Tubular gauntlets, pasted negative plates manufactured under exacting control to withstand rough handling and electrically separated by high quality PE Separators
The tubular positive plates have specially designed spines casts from corrosion resistant lead antimony-selenium alloy ensconced in tabular bag which is vibro-filled with active material and pickled, thus ensuring high-rate discharge, more capacity for a given volume, greater shock resistance and long life with excellent reserve capacity
The pasted negative plates, made up from a blend of oxide, special additives and expander, aid in cell longevity
The high quality PE separators provide high electrical insulation between the plates with low internal resistance for improved battery performance
Short-circuit between plates due to sediments is avoided by the use of sediment spacer at the bottom of the container on which the plates rest
The Micro porous vent plugs prevent loss of escape of electrolyte. The hard rubber top cover gives a perfect air-tight sealing to the cell
Microtex lead acid Diesel Locomotive Batteries are low maintenance batteries
Special Features:
The low antimony content in the grid alloy ensures low gassing
Water loss and maintenance is minimum
Corrosion is negligible
Very low self-discharge and internal resistance
Excellent reserve capacity
Delivers consistent reliable power
Suitable for all weather conditions
Long life cycle
Diesel locomotive engines use heavy duty industrial diesel locomotive starter batteries for starting and operation of a variety of on-board equipment. The modern diesel locomotive in India is a self contained version of the electric locomotive. Like the electric locomotive in Indian Railways, it has electric drive, in the form of traction motors driving the axles and controlled with electronics. For over three decades, Microtex has been a technological leader in the development of high performance Industrial lead acid batteries, especially for Indian Railways. Microtex continues its commitment to research and develop for improving batteries as per customer need of railway diesel locomotive starting batteries with RDSO approved specifications.
MIicrotex DG Starter Heavy Duty Batteries with new technology for Genset applications. The Heavy Power Batteries come with exclusive features to meet the demanding conditions for Genset applications in the Indian environment. These batteries are manufactured using state of the art techniques and quality components, materials for reduced maintenance and extended battery life.
We are leading manufacturers & suppliers of best quality Golf Cart Batteries.
Microtex Golf cart batteries - Special Features:
Special Antimonial alloys for good cycle life and low maintenance
Tubular spine grids casted at 100 bars High Pressure die casting on German technology machines, for high compacted & corrosion resistant grids.
Proprietary chemical mixes for added service life.
Heavy duty custom made separators.
Heat sealed to eliminate container leakage.
Available in wide range of 6v, 8v & 12 volts
The PVC battery separator was developed for the first time in India under the brand name Microtex with their own know how and with indigenously designed machinery 41 years ago. The plant and machinery comprise sintering machines and other electrical installations, with own captive power generators, for the smooth and automatic production of over a hundred million separators per annual, the largest and most renowned manufacturers of PVC separators in India.
PVC battery separators are micro porous diaphragms placed between the negative and positive plates of lead acid batteries to prevent any contact between them to avoid internal short circuit but at the same time allow free circulation of the electrolyte. Microtex PVC separator are uniform in quality, free from holes, broken corners, splits, embedded foreign material, surface rupture, physical defects, etc
Characteristics:
Microtex PVC separators have a very low electrical resistance which reduces internal loss saving on electric energy and improving battery performance. Their high porosity ensures easy diffusion of electrolyte and movement of ions guaranteeing battery performance even at high discharge rates. Being completely non reactive to acids, active metals and emitted gases, Microtex PVC separators enhance the active life of the battery.
PVC separators surpass IS specifications IS 6071:1986 and have been tested and certified by the Central Electro Chemical Research Institute, CSIR, Chennai to be within IS specifications
Microtex PVC separators are manufactured in both standard and custom sizes for automotive and industrial battery application. Every separator produced is visually inspected before being packed. Physical and chemical testing is done batch wise at CECRI CSIR, Chennai. Routine checks made at key stages along the manufacturing process maintain Microtex separators' constant high quality
Microtex separators, combining the outstanding characteristics of low electric resistance, chemical cleanliness, higher porosity, Low pore size, superior corrosive resistance and with a minimum level of oxidizable organics, make themselves extremely usable for automobile, traction, stationary, train lighting and all other lead acid batteries.
Microtex separators have proven themselves over 41 years of use. Four decades of experience and modern production methods and facilities have made Microtex the leading battery separator supplier in India. The key to their leading position in the separator industry is technological innovation, quality, and service.
Product Range:-
Height (mm)
Width (mm)
Thickness (mm)
136
148
1.65
136
148
1.1
140
147
1.6
84
76
1.65
145
115
1.4
300
148
1.65
270
148
1.65
Microtex traction cell is assembled in a high-grade plastic container containing high performance tubular positive plates in premium energy bags. Microtex traction cells deliver consistent reliable power. Our product is suitable for all weather condition. Water loss and maintenance is minimum. Microtex traction batteries are used in electrically powered vehicles like the forklift, Pallet Truck, Scissor Lift and any other industrial traction applications. Microtex lead acid traction batteries are manufactured in India by Microtex Energy P Ltd. for more than two decades. The unit has a well established modern battery manufacturing facility with a fully equipped chemical and electrical laboratory at Peenya, Bangalore. Microtex traction batteries are used in electrically powered vehicles like a forklift, tow truck, power trolley, lifting platforms and other industrial traction applications. These traction batteries are made to BS & DIN specification.
Constructional Features:
Each traction cell is assembled in a high grade plastic container
The container containing high performance tubular positive and pasted negative plates. The positive and negative plates are separated by high-quality PE Separators
The tubular positive plates have specially designed spines, cast from corrosion resistant lead-antimony-selenium alloy ensconced in the tubular bag which is Vibro-filled
The pasted negative plates made up from a blend of oxide, special additives and expanded, aid in cell longevity
The high-quality PE separators provide high electrical insulation between the plates with low internal resistance for improved battery performance
The high-grade plastic containers are non-reactive to acid, temperature and the gases emitted by the cell
Short-circuit between plates due to sediments is avoided by the use of a prismatic sediment spacer placed at the bottom of the plastic container on which the plates rest
The splash-proof vent plugs prevent the escape of electrolyte. The hard rubber top cover gives a perfect air-tight sealing to the cell
Microtex electric multiple unit or emu battery is made up of 5 cells of 2 volts each. The cells assembled in molded monoblock hard rubber containers are connected with welded joints made of lead alloy with an anti-corrosive coating. Water loss and maintenance is minimum delivers consistent reliable power. Microtex lead acid EMU batteries are manufactured by Mysore Thermo Electric Private Limited.
Microtex EMU Battery is made up of 5 cells of 2 Volts each. The cells assembled in Molded Monoblock Hard Rubber containers are connected with welded joints made of lead alloy with an anti-corrosive coating. The Microporous Vent Plugs fitted to the cells prevent the spilling of the electrolyte.
Constructional Features:
Each cell assembled in Monoblock Hard Rubber container containing Microtex hi-performance tubular positive plates in premium Energy Bags Acrylic Gauntlets bags, pasted negative plates manufactured under exacting control to withstand rough handling and electrically separated by high quality PE Separators
The tubular positive plates have specially designed spines casts from corrosion resistant lead antimony-selenium alloy ensconced in tabular bag which is vibro-filled with active material and pickled, thus ensuring high-rate discharge, more capacity for a given volume, greater shock resistance and long life with excellent reserve capacity
The pasted negative plates, made up from a blend of oxide, special additives and expander, aid in cell longevity
The high quality PE separators provide high electrical insulation between the plates with low internal resistance for improved battery performance.
Short-circuit between plates due to sediments is avoided by the use of sediment spacer at the bottom of the container on which the plates rest.
The Microporous vent plugs prevent escape of electrolyte. The hard rubber top cover gives a perfect air-tight sealing to the cell
Special Features:
The low antimony content in the grid alloy ensures low gassing
Water loss and maintenance is minimum
Corrosion is negligible
Very low self-discharge and internal resistance
Excellent reserve capacity
Delivers consistent reliable power
Suitable for all weather conditions
Long life cycle