Waterproof ph meter with backlight
Specifications
Range 0.0 to 14.0 ph
Resolution: 0.1 ph
Accuracy : ±0.01 ph
Typical emc deviation ±0.1 ph
Calibration: manual, 1 point,
Temperature compensation automatic: 0 to 50
Environment: 0 to 50 (32 to 122f);
Rh max 95%
Battery type 4 x 1.5v alkaline
Battery life approx. 200 hours of use
Dimensions 152 x 30 x 21 mm
(5.9 x 1.2 x 0.8")
Weight: 53 g
Operation
Remove the protective cap. Do not be alarmed if white crystals
Appear around the cap. This is normal with ph electrodes and
They dissolve when rinsed with water.
Turn the meter on sliding the switch on the top.
Immerse into solution up to the max immersion level. ?¢ stir gently and wait until the display stabilizes. Readings are automatically compensated for temperature variations.
After use, switch off ph meter, use the water clean the electrode and replace the protective cap.
Do not use distilled or deionized water for storage purposes.
Large fluctuations in readings could be due to lack of calibration, dry electrode or rundown batteries.
Calibration
Immerse the tester up to the maximum immersion level in ph 6.86 buffer solution
Allow the reading to stabilize and using a small screwdriver adjust the calibration trimmer to read 6.9.
Calibration is now complete.
Always use fresh buffers for calibration.
Battery replacement
When the meter cannot be switched on or the display fades, pull out the battery compartment and replace all three 1.5v batteries, while paying attention to their polarity. Batteries should only be replaced in a safe area using the battery type specified in this instruction manual.
ORP-986 is high precision pen type ORP meter is a nice waterproof type ORP test pen , very suitable for field application; All the reading through automatic temperature compensation (ATC);.Temperature sensor in direct
contact with the measured solution makes the reading accurate and fast.
Large screen display, high resolution and precision can keep reading convenient, fast and accurate.
Low pressure hint, power saving, high precision, wide measuring range, accurate measurement ,simple operation, strong and durable, economical and practical.
It can completely meet all kinds of industry test needs.
z
Pp cotton filter tap filter for demo use
Please soften the connector by dipping it into the hot water for a while then connect this product to the water tap. If the white color filter turns yellowish or darker in a short while after using, it means the tap water has been polluted by the secondary pollutants.
This meter can be sued for checking the pure water production and drinking,electroplate liquid,pots of water.Fish Tank.Swimming pool.Well water.Camera Lotion.Deep well water.Lab.Aquaculture,Food processing,House,Office
Physical&Chemistry Teaching Classroom.Electrolytic lonized water,Cosmetics.Municipal water supply,Travel&HealthCare and Human Urine PH. z
Features:
100% brand new and high quality
Automatic shutdown: automatically shut down after 10 minutes
Reasonable design: the pen electrode can be directly inserted into in the drinking water bottle
Fast test: due to the exquisite naked type sensors, 2-6 seconds to finish a test
Easy cleaning: the electrode sheath can be drawn, easy to clean the probe and jacket.
Titanium alloy material reduces the magnetic disturbance in the water!
With leather case, portable, small and light weight, easy to carry
Wide testing range 0~9990PPM
Wide application temperature: working in 0~50degree
LCD screen, long battery life
Reasonable design: the electrode can immerse into the aqueous solution directly; the protective cap can be regard as a container of aqueous solution!
High accuracy and auto temperature compensation
z