HomeSure Tile Adhesive is cement based general tile adhesive. It contains highest grade of graded sand,
cement, selected fillers, polymers and chemical additives to give it unique properties.
We offer Tile Adhesive in 3 different variants:
Silver Star: General purpose tile adhesive for ceramic tile, tile on tile for wall and flooring application.
Gold Star: Higher grade of water resistant tile adhesive suitable for Vitrified, Marbonite wall and
flooring application.
Platinum Star: White cement based tile adhesive for fixing Marble, Granite, Glass tiles etc. for wall and
flooring application.
Standards :
Complies the specification of ISI 5477: 2004
Silver Star and Gold Star : Type I
Platinum Star Type II
Features :
- Excellent bonding to the
base plaster/concrete even
at a thickness of 2mm
- No need for hacking
- Water resistant
- Can be used on new as well
as old walls and floors
Advantages :
- Good workability
- Ease of use at site
- Suitable for interior
- Suitable for exterior along
with additional metal anchoring
- Consistent work quality
Benefits :
- Durability
- Saves time and Increase productivity
- Cost effective
- No curing required
Surface Preparation :
- Clean loose particles, dirt, grease and traces of foreign material from the surface, if necessary by using
wire brush / sand paper or by chipping.
- For loose plaster areas, remove the defective material and replaster the area with Ready-Mix Plaster.
- For floors / walls, which are not even, replaster with Ready-Mix Plaster to make them even.
- New Construction : Before tiling the new construction should be cured for 6 weeks.
- Old Construction : Remove all loose portions and make good with sand cement slurry bonding coat prior
to apply HomeSure Tile Adhesive.
Mixing :
- Take clean water as per the water demand in a clean bucket. Add 1 kg HomeSure Tile Adhesive.
Stir continuously by hand to obtain a homogenous lump-free paste. Tile Adhesive should be creamy
like butter.
- Allow the resultant paste to stand for about 5 minutes for the additives to dissolve.
- Re-mix again for about 2 minutes. The mixture is now ready for application.
- Use the mix within 30 minutes.
Application :
- Dampen the surface to be plastered with clean water, Allow excess water to drain off.
- The tiles should be immersed in water for about two hours before fixing.
- Using a steel trowel/ blade, apply the above mix to a thickness of 2-3 mm either on the wall or on the
back of the tile (but not both).
- Using a notched trowel remove excess material, Put the tile in place and tap gently with a wooden
hammer.
- Remove excess mixture from the tiles by using a damp cloth or sponge.
BuildWell Colour Putty is a wall putty with added advantage of shades like Pink, Yellow, Green and
Off-White, especially developed as a base coat to provide smooth finish on plastered surface, and hence
ideal for expensive paint application because paint saving can be up to 50%.
It contains finest quality minerals, polymers, white cement and pigments. It can also be used for low end
application like basement parking lot, etc as 'Final Finish'.
Benefits :
- Reduces paint consumption
- Avoid frequent repainting.
- Cost effective.
- Aesthetic look for ceiling and Interior walls.
- Ease of use at site.
Advantages :
- True colour tone of the paint is
maintained, primer is not required.
- Protects expensive paint from dampness,
peeling off, and flaking.
- Makes paint durable.
- Suitable for Interior.
- Paint finish is superior.
BuildWell Quickbond is a admixture of sand, cement and superior quality polymers. It is a bonding agent
that enables quick preparation of ceiling and RCC wall surface. Also offers the dual benefits of mechanical
and chemical bonding, which eliminates the labor – intensive hacking and reduces debonding losses.
Features :
- Excellent bonding.
- No hacking is required on RCC wall.
- Hence prevention of microcracking and
saving of labor cost.
- Strong chemical and mechanical bond
- Easy to use.
- Works good for Gypsum plaster as well
for cement sand plaster
Benefits :
- Can be easily applied by brush.
- Reduces hacking.
- Time saving.
- Less rebound loss while plastering.
- It is water soluble product hence no
solvent odour.
- Fast drying.
- Improves bonding strength between
RCC wall and Plaster.
BuildWell Gypsum Plaster is light weight gypsum based plaster suitable for application on most internal
backgrounds including brick, block and concrete. It consists of superior quality gypsum, formulated with
special additives to enhance working and setting characteristics, also improves workability and coverage. It
provides superior whiteness with smooth matt finish which is ready for painting.
Features :
- Superior whiteness
- Free from shrinkage cracks
- Provides excellent bonding
- Light in weight
- Imparts high coverage
- Zero maintenance
Benefits :
- Faster setting than the conventional sand cement plaster
- Reduce structural load on building as it is 50% lighter then
sand cement plaster
- Direct application on RCC, sand cement plaster surface &
surfaces to be repainted
- Smooth matt uniform surface finish
- No water curing required
- Compatible with all types of paints & decorative range
- Low consumption of paint
HomeSure Primabond is multipurpose white cement based dry powder primer specially blended and
developed with supreme quality polymer for durability, adhesion and strength which is ideal for interior
and exterior wall.
It has excellent alkali resistance and water proofing properties which provides an excellent a strong base and
enhances the quality and coverage of decorative paints and other acrylic polymer based coatings. Moreover,
it is easy to apply and can be used as an under coat. It also effectively seals all construction flaws, making
the surface stronger and beautiful.
Features :
- Quick drying
- No wastage
- High durability
- Excellent adhesion to base
plaster
- Excellent sealing
properties
- Super whiteness & opacity
Advantages :
- Saves time
- Reduces paint consumption
- Ease to use/apply
- Less surface absorbent
- Excellent smooth finish
- Consistent work quality
Benefits :
- Value for money
- No need of curing
- No odour
- Can be used on wet
surfaces
- Good resistance to moisture
- Enhanced coverage &
finish of coatings
Surface Preparation :
- Before application of Primabond, ensure to clean the surface and remove all loosely adhering
material from the wall surface with help of sand paper, putty blade or wire brush.
- The substrate should be clean, free from dust, grease and loose materials. Moisten the wall with
sufficient quatity of clean water.
- For loose plaster areas, remove the defective material and re-plaster the area with Easyplast
Ready-Mix plaster.
- In case of cracks, voids or any minor damage in base plaster, fill the cracks by using Crack Filler prior
to the application.
- Pre wet the surface to get better workability, binding properties and coverage for achieving better
results (Very Important).
Mixing Process :
- Take clean water in a bucket/pot and pour Primabond very carefully to water measuring 50% (& not
vice-versa). In a ratio of 1:1.
- With the help of mechanical stirrer or hand mix the mixture for about 5 minutes to obtain a free flowing
homogenous lump free smooth paste.
White Cement Based Wall Putty HomeSure Wall Putty is a white cement based polymer modified wall putty specially developed as a finish coat to cover unevenness and pinholes in plastered surfaces and to make the walls/ceilings ready for painting. As it is white, it can be treated as a base coat for painting. What is a skim coat? : A skim coat is a thin layer of cementitious plaster which is â??skimmedâ?? e.g. applied very thinly onto the interior and exterior of plastered and concrete surfaces.
