Magnetic Liquid Traps separator are designed to extract the ferrous materials from the slurry or liquid raw materials in order to purify the material in the production process. Strong magnetic traps filter the flow and extract the unwanted ferrous metal. While the slurry and liquid flows around the magnetic tubes, a very strong magnetic field (generated by the neodymium NdFeB magnets inside of the tubes) traps all metallic particles on the surface of the tubes.
As advanced magnet filters,These easy cleaning trap are an ideal magnetic filter for removing super fine ferrous contamination from materials of liquid,Semi-liquid lines or air-conveying lines with high content of ferrous metal. Because the easy cleaning design can provide convenience solution to cleaning the bulk ferrous contamination from outer sleeve, working efficient can be improved very much.
Stainless steel armor clad belting Magnetic separator normally be suspended mounted over the conveyor system to trap and hold the tramp metal from the product carried by the conveyor. These high-wearing armor clad belting type magnetic iron separater are the most ideal equipments for the tougher scrap metals extraction from course materials. Installed in a variety of circumstances for de-iron production line to removing harmful tramp ferrous metal contamination from non-ferrous products,this wearable armor clad belting type magnets are Ideal for cleaning the product stream for equipment protection on shredded plastic, being conveyed between shredders and granulartor to protect against costly knife damage and maxmize product purification.
Eddy current non-ferrous metallics sorters are Ideal equipments for the recycling industry wildly used in recovery and separation aluminum, die-cast metal, copper and other value metals from nonmetallic dry recyclables material(such as plastics, glass, electronic scrap, automobile shredder residue, bottom ash, foundry sand, trash, co-mingle recyclables etc).
Eddy Current non-ferrous metallics separation sortor (ECS) use powerful Rare Earth permanent magnets to process through produces repelling forces for separation.
Those heavy duty copper & aluminum non-ferrous metallics sorting equipments are increasingly used wherever separation of non-ferrous metals from a product stream can give a more valuable product, whether the end use is in recycling, waste reduction, raw material production or any other process whereby separation is beneficial.
Kanpur
Fluids line magnetic cartrigde traps are utilized for non fibrous fluids where the size of the contaminants is few diameters and pose no risk of clogging. to extract remove the ferrous tramp materials from fluid and slurry lines in order to purify the material in the production process. Strong magnetic traps filter the flow and extract the unwanted ferrous metal. While the slurry and liquid flows around the magnetic tubes, a very strong magnetic field (generated by the neodymium NdFeB magnets inside of the tubes) traps all metallic particles on the surface of the tubes.
As advanced fluids trap magnets,These easy cleaning in pipeline metal trap magnets are an ideal magnetic traps for removing super fine ferrous contamination from materials of liquid,Semi-liquid lines or air-conveying lines experienced in most cases with no appreciable pressure drop or reduction in flow rates. wildly used in Food industries,Pharmaceutical,Chemical product flows,Rubber industries,Plastic industries,Lithium battery recycling industries ect.All units incorporate a sump type housing to trap ferrous particles. Liquid Traps may be installed horizontally, vertically, or on an angle without affecting their magnetic efficiency.
Email: jsyy@sino-magnets .com.cn
HMDS Wet type Magnetic Separator is widely used for fine-grained iron magnetite ores purification or separation.With the development and expansion of heavy media processing technique, drum separator for heavy media processing is widely used in the separation of various kinds of iron ores and coal ores.
Fine iron magnetite separator are requisite equipment for concentration plant of iron mine, suitable for the wet magnetic separation of the materials whose granularity is below 3mm such as hematite, magnetite, pyrrhotite, calcined ore and ilmenite and can also be used for removing iron from the materials such as coal, non-metal ore and building material. the performance and steadiness plays a vital part in the economic benefit of ore beneficiation .
The permanent magnetic pulley is dual-purpose equipment used for protection of crusher Jaws or other machinery and also for purification and concentration of magnetic material from the mines. always as a head or tail pulley at the discharge point of the conveyor to separate tramp iron from the product removing on the conveyor belt .It has the widest application in food, chemical, ceramic, paper, coal handling, foundry operation and mining industry.
1.Recycling and Reclaiming:
Separate ferrous from recyclables such as plastic, aluminum, glass cullet, wood chips, and crumb rubber.Remove ferrous from shredded medical waste and steel shot and small slag from foundry sand.Reclaim steel shot used in bead blasting for bridge maintenance and other applications.
2.Processing industries
It is suitable for application on automatic production lines purification of raw materials in plastics, sand, stone, fertilizer, cement, carbon, abrasives, glass, borings, grindings, pigments, grain, seed, cereal, candy, sugar, coffee tile, ceramic, food, recycling, casting, cereal, chemical, mining, pharmaceutical industries and steel foundry industries, beside that it can be used widely for Iron ore Concentration or Ferro Alloy treatmen
t.
If fit your require Please Contact with Miss Jasmine Song :
TEL: +86 24 54012777
MOBILE: +86 15242300557 (WhatsApp/Wechat)
SKYEPE: luckjasmine86
Email: jsyy@sino-magnets .com.cn
This effectively and efficiently permanent magnetic non-ferrous recycling machine use powerful Rare Earth permanent magnets to process through produces repelling forces for nonferrous metal paticles separation,Ideal for the recycling industry to extraction of non-ferrous metals(aluminum, die-cast metal,alloy, copper,brass and other value metals) from bulk flows (such as plastics, glass, electronic scrap, automobile shredder residue, bottom ash, foundry sand, trash, co-mingle recyclables etc).
Magnetic separation pipes/chutes are the most effective and economic separation system for easily permeable grains,flour and powder type mixtures.especially for the particles materials who would not fall down continuously through the magnetic grids.With powerful ferritic or rare-earth (NdFeB) magnets core.
Suitable for industry: Cattle / animal feeds Ceramic Food Minerals (fine) Plastic / Rubber Recycling Seeds.
