Wire c clamps are used for lightning protection of building,conductor of the fastening and connection of the net work,Use the matched fittings will make the lightning system easy to install and extend the using life.
Application
NXJ Series is suitable for strain clamp insulation string of 10kV aerial insulation aluminium core wire JKLYJ terminal or two ends fixing and tighten aerial insulation.
Structure feature
1,The shell made of anti-oxidate high strength aluminum alloy.
2,The core of wedge made of insulating reinforce plastics, withstand voltage : ???18kV not breakdown one min.
3,Not remove the insulation layer,AI-core wire are current use.
4,Without waste power
5,Wedge structure
Shearhead Connectors
shearbolt connectors are a reliable and cost effective way of connecting different conductor sizes and types.
manufactured and certified in Europe from high strength aluminium alloy and using shearbolt technology, they are
available as both a lug and a link in 1KV and up to 36KV options.
shearbolt connectors minimize inventory and can save downtime in the event of cable outages.
they are quick and easy to use, provide optimal cable clamping and can be used on both copper and aluminium conductors.
USED MATERIALS:
Aluminum ring or copper tinned ring.Undergrounding ring:diameter10mm
VARIANTS:
Variant of the product is also manufactured and supplied in modification's as is showed upwards in PRODUCT RANGE.Special range can be required.
STORANGE AND TRANSPORT:
Product do not have any specific requirements on storage. It is fire-resistant and it is not dangerous.
1. Application: wire connection.
2. Material: pure copper;
3. Shape: eyelet lug;
4. Attribute: high conductivity,heavy current;
hot-dipped galvanized bolt & nut and cable fitting with well-equipped testing equipment and strong technical force.
With a wide range, good quality, reasonable prices and stylish designs, our products are extensively used in the area of electrical power industry, esp. in mounting of overhead power line.
USED MATERIALS:
Aluminum ring or copper tinned ring.Undergrounding ring:diameter10mm
VARIANTS:
Variant of the product is also manufactured and supplied in modification's as is showed upwards in PRODUCT RANGE.Special range can be required.
STORANGE AND TRANSPORT:
Product do not have any specific requirements on storage. It is fire-resistant and it is not dangerous.
Type Suitable Conductor Dia(mm) Main Dimension Specified failure
load(kN)
M C
NLL-1A 5.0~10.0 16 18 40
NLL-2A 10.1~14.0 16 18 40
NLL-3A 14.1~18.0 16 27 70
NLL-4A 18.1~23.0 18 30 90
split bolt SB series
It is used to branch or connect aerial hard copper conductor or insulated copper conductor.
Material: Brass
Surface treatment: Tin plated or copper plated on request
Product Property: It is used to branch or connect aerial hard copper conductor or insulated copper conductor.
SpecificationsMatrial: Copper and Aluminium
Matrial: Copper and Aluminium
Type: Lug, terminal, wire terminal
Certificate: ISO9000:2008
Packing : Nylon
1.DTL series of copper_aluminum wiring tcrminals are suitable for transition conncction of the circular aluminium wircs,hcmicycle_sertor aluminium wires,power supply cables in the distribution equipment and copper terminals of electrical equipment.
2.The material of alminium and copper is that of L3 and T2 respctively.
3.The technology of friction welding is wonderfully adopted.Therefore they have disinguishing features of strong weld intcnsity,good nature in electrification,resistant galvanic corrosion and long service life.
SLG-F type compound transition terminal clamps for copper & aluminum make the conductors be firmly clipped into the clamps in virtue of the pressure of bolts on which the electric contact performance of clamps depend upon their installation quality to some extent themselves. These clamps are suitable for grasping medium or small section aluminum stranded wires or ACSR. In view of be easy disassembly, they are especially for short-term device connections in substation.
JCD type electric meter box clamp is made from a special aluminum alloy material, conductive performance is very strong, both for the aluminum wire, and is suitable for copper wire and copper aluminum transitton wire. Mainly used in the connection into householods bus and electric meter box holding the line, with a head into households bus connection, through the hinge wedge wire pressing, using C type structure of the body, can keep the guide constant contact pressure line.
The PGC is used for all non tension aluminum to aluminum cable. PGC-10/95 is equipped with two M8 shear head bolts. Use 13mm spanner to screw the torque nuts until they shear off
The body and keepers are made of copper,other parts are made of hot dip galvanized steel.
The body and keepers are made of copper,other parts are made of hot dip galvanized steel.
Easy installation for ACSR conductor
JBT seires combined channel connector is applicable to weight-disburdening connection of overhead aluminium wire and splicing steel wire,and uses with the insulation hat protects the insulation function.
1. suitable for the connection of power transformer, and copper or aluminum wire.
2. it features high conduct-tance,
3. easy installation.
4. Progressive welding technique
Product Information :
Suspension clamps are used to hang conductor or ground wire through insulators of link fitting to tower arms of substation structures The clamps are made of malleable iron or alummium alloy
The meaning of letter & arabic figures in the catalog are shown as follow
Xsuspension clamp Gfixed Sdolble clamp UU bolt Jstrength Halunimium Fcorona control K unde r axletype T envelopetype A with a socket clevis B with U clevis C hartg downtype
The suspension angleof suspension clampsis not less than 25??C the radius of curvature is not less than the dia of installed leaded by 8-10,and the percentage of the grip on different kinds of leads to calculating capabilltyof snap show in following table
ADSS Accessories Simple Guy End Grip
Specifications
Simple Guy End Grip
1.ADSS preformed tension clamp is used for cable route's fixing & anchor shackling.
2.Installed on the terminal tower, tight tension tower and intersection angle tower etc.tension cable clamp
3. Compared with the traditional fittings with uniform force, no stress concentration and good vibration performance.
4. Perfect corrosion resistance: because the material is HOt dip galvanized steel wire or Aluminium clad steel.
5. Easy installation: One man does not need any special tools to complete the installation. tension cable clamp
Cross section parallel groove clamp is suitable for non-load-bearing connection & branches subjected to overhead power line, with convenient and flexible installation; it is suitable for a large range of wire and so on. JBKG series are adopted technics of friction welding & brazing while the usage of clamp combined with the insulating cover will be helpful to insulation provention.
Material
1.Body Material : UV-resistant plastic
2. Nut Material : Hot-dip galvanized steel
3. Teeth material: Cu or AL
Applications Type:Overhead Transmission and Distribution Connections
Product Type Features;Wedge
Housing Features:Insulated Cover
Voltage Class:0-200KV
Usage Conditions:Operating Temperature(??F)-30 to 120
Products Pictures.png
36.jpg
Technical information.png
Product Name Specifications Modael Remarks Main Lead Lead wire Ground clamp
Wedge-type
and groove clamp(ejectorcore) JXD-1 JXL-1 35-50 35-50 JXD-1
JXD-2 70-95 35-50
JXD-3 70-95 70-95
JXD-4 JXL-2 120-150 35-50 JXD-3
JXD-5 120-150 70-95
JXD-6 120-150 120-150
JXD-7 JXL-3 185-240 35-50 JXD-4
JXD-8 185-240 70-95
JXD-9 185-240 120-150
JXD-10 185-240 185-240
Suitable for ACSR, JKLJY, AAC, LJ,TJ, LGJ,LGJF cables
1.max touch between cable&conductor
2.good heat recycle
3.high strength AL alloy, stainless bolt
Product Specification:
polycarbonate sheet connector h and u profile is used as connector of 4.0mm/6.0mm ; 8.0mm/10.0mm 14mm/16mm polycarbonate hollow sheet
Standard size : 6 Meter
Standard color : clear
Tension clamps are used to fix conductor and ground wire through insulators or link fitting to tower arms or substation structrues.In according to the clamp construction and mounting way,the clamps include three types as compression type, bolt type and wedge type.The compression type include hydraulic type and explosive type.
1. Strain clamps fix conductors and ground wires through insulators or link fittngs to tower arms or substation structures.
2. According to the aluminum alloy strain clamps construction and mounting way, the aluminum alloy strain clamps include two types: compression type and bolt type.
3. The Aluminum Alloy Strain Clamps (Compression Type ) include Hydraulic and explosive type.
4. As the Bolt Type Aluminum Alloy Strain Clamps are used to AAC and ACSR, the conductor may to wound by aluminum tapes or preformed armour rods for protecing these taps or rods are included in the diameter of suitable conductor.
Application:
NXL Series strain clamp (wedge type)is suitable for distribution wire up to 10kV,fixing the aerial insulation aluminium conductor or naked aluminium conductor on the rotate angle or insulator of terminal strain pole, and then fixing and tighting the aerial conductor ,insulation cover and strain clamp are used together. Its action is insulation protection.
Insulation cover performance feature
1,Withstand voltage: 18kV keep voltage one minute not break down
2,Insulation resistance: >1.0??1014??
3,Environments temperature: -30~90
4,Weather proof performance: have good performanced after 1008 hours artifical climate aging test.
