Light source: osram cree
Color: 3000k, 4200k, 6000k
Material: aviation aluminum alloy
Input voltage (v): dc 24, ac 220v
Ip degree: ip67
Lightning protection
Weight:2300g
1 balance design, waterproof breathable membrane, prevent siphon and condensation phenomenon.
2, the lamp body is made of high quality aluminum alloy die casting.
3, lamps and lanterns adopt surface plastic spraying process, corrosion resistance to oxidation.
4, built-in led professional design of radiator, can automatically recover overheating protection.
5, thermoelectric separation design.
Light source: orsam caree
Material : stainless steel casting molding
Color: rgb, 3000k, 4200k, 6000k
Dc 12v
Lightning protection lv4
Ip degree: ip 67
Led life span: 50000h
Beam angle: 25/ 45(9pcs),
1. The lamp body is stainless steel casting molding, cooling effect is good, ageing resistance, corrosion resistance;
2. With german import waterproof aging resistant silicon rubber sealing ring, has a good waterproof performance, secondary waterproof structure, meet the bad environment using requirements;
3. The light source adopts imported led, a variety of colors to choose from, can control all kinds of changes by the controller
4. The built-in constant-current drive and the dimming decoder;
5. Pervious to light surface uses toughened glass, light uniformity, good impact resistance is strong;
1 lamps with high thermal conductivity aluminum extrusion
2 the surface of the lamp is treated by anodic oxidation, corrosion resistance and oxidation resistance.
3 light transmission cover using imported pc material, uniform mixed light effect, anti aging, anti uv
4 kinds of mounting bracket, convenient installation, suitable for different places
5 inside the lamp with anti uv, anti uv silicone treatment
6 light source using imported led, a variety of colors can be selected
7 built in constant current driver and dimming decoder
Structure: streamlined extrusion aluminium body with high heat resistant plastic end cover, and uses the internal cavity is waterproof glue, and adopt surface anodic oxidation treatment, can be processed into different color according to the project, the light source cavity at the top of the optional high-quality pc mask and extruded aluminum mask;
Light distribution: lamps and lanterns with warm white (3000 k), neutral white (4200 k), cold white (6000 k), a variety of light rgb, and optional square concentrated high light transmittance of pmma cover to prevent color temperature deviation and enhance brightness of light output;
Specifications: product cross section 15 x 18.5 mm, each specification is 300 mm / 500 mm / 1000 mm length of three kinds of optional, and preset dc24v low-voltage power drive.
1. Lighting source: osram cree
2. Material : aviation aluminum alloy + japan teijin pc lens + sus304 stainless
3. Size: l 140* w123.5* h100mm
4. Color: single color (w, r, g, b, a)
5. Beam angle: 20 (20pcs) / 30(20pcs)
6. Dc 24v
7. Lightning protection lv4
8. Ip degree : ip 67
9. Led life span: 50000h
10. Power factor(pf): >= 0.95
11. Color index (cri): >= 80ra
12. Input voltage (v): ac 85-265v
13. Working temperature: -40~+ 50
1, the surface electrostatic pensu processing technique of lamps and lanterns, corrosion resistant antioxidant
2, uses the german import waterproof aging resistant silicon rubber sealing ring, satisfies the requirement of environment use
3, 4 mm thick glass used high light transmittance of toughened glass, impact resistance, high light efficiency
4, built-in led professional design of radiator, can automatically recover overheating protection
5, waterproof breathable membrane inside and outside differential pressure balance lamps and lanterns, prevent siphon and condensation phenomenon
6, match light treatment, professional, high washing wall evenness.
7, thermoelectric separation design, enhanced the stability of the electrical properties
1, material: aluminum alloy lamp body, the side cover and back cover, japan teijin pc lens material, corrosion resistance to ultraviolet, through the puncture resistance ik08 test. Surface using military level 3 hard anodic oxidation process, thermal conductivity of up to 230 w/m * k. Lamps and lanterns of sus304 stainless steel stents, have gear lock function, the minimum adjustment angle of 10 .
2, light distribution: lamps and lanterns is equipped with a high standard of particles osram, show to show, high brightness, high light distribution, precision optical design;
3, performance: choose japan too on capacitance, the ti chip, phillips driver imported electronic components, such as guarantee the performance of lamps and lanterns; adopts the steps of the professional waterproof structure design, protection grade up to ip67; increase heat sink design, at the bottom of the heatsink 40 mm deep, density of 2.7 g/cm after; using thermoelectric separation design at the same time, increase the stability of electrical performance and service life of the lamps and lanterns.
Light source: osram
Light color: rgb, 3000k, 4200k, 6000k,
Power: 3w
Dc 24v
Ip level: ip 66
Working temperature: -40~+ 50
Lighting protection
1 simple and beautiful, lightweight device, a variety of mounting bracket;
2 light body for high quality aluminum alloy high pressure casting forming, surface electrostatic spray processing, heat dissipation effect is good, anti-aging, anti-corrosion;
3 light body surface color can be selected according to customer
4 the transparent cover is made of transparent high medium, high transmittance, anti-aging, anti uv;
5 germany imported anti aging silicone rubber waterproof sealing ring, the structure of the two waterproof, to meet the requirements of the use of harsh environment;
6 built in constant current drive, low cost control;
7 structure fixed lens, more reliable, prevent the lens uneven, loose fall off;
8 built in professional led design cooling device, can automatically recover the overheating protection;
9 can realize monochromatic light and color dimming can be controlled by the various changing effect;
1.Lighting source: cree
2. Color: single / rgb
3. Product cross section: 15* 22.5mm, 300mm/500mm/1000mm length
4. Material: extruded aluminum
5.Ip degree : ip66
6. Lightning protection
7. Weight: 500g
Structure: streamlined extrusion aluminium body with high heat resistant plastic end cover, and uses the internal cavity is waterproof glue, and adopt surface anodic oxidation treatment, can be processed into different color according to the project, the light source cavity at the top of the optional high-quality pc mask and extruded aluminum mask;
Light distribution: lamps and lanterns with warm white (3000 k), neutral white (4200 k), cold white (6000 k), a variety of light rgb, and optional square concentrated high light transmittance of pmma cover to prevent color temperature deviation and enhance brightness of light output;
Specifications: product cross section 15 x 18.5 mm, each specification is 300 mm / 500 mm / 1000 mm length of three kinds of optional, and preset dc24v low-voltage power drive.
Light source: orsam
Light color: rgb
Ip level: ip66
Dc 24v
Working temperature; -40~+ 55
Lawn lamp is widely used in urban slow lane, narrow lane, residential areas, scenic spots, parks, squares, private garden, garden corridor and other public places used for road lighting one or two volumes, the way of improving the security of people travel at night to increase people's outdoor activities, improve the life and property safety. It can also change people's mood, improve the person's mood, and the ability to change people's idea, to create a light and dark and white palette of the night. During the day, lawn lamp can adorn urban landscape; night, lawn lamps and lanterns can provide the necessary lighting and convenient life, increase the residents' security, and to highlight the city window, deduce beautiful style, so that in use today
