Hydraulic automatic new type high quality compressed wood pallet making machine
Http://palletmachine.En.Alibaba.Com/product/60338985502-800924687/automatic_wooden_pallet_molding_machine_from_paimo.Html
Wooden pallet molding machine
Model:pm1000---- pm 1200
Pressure:1000-1200t adjustable
Hydraulic oil cylinder quantity:4
Pallet density:850-950kg/m3
Shaping cycle:450 seconds
Pressure increasing time:35 seconds
Capacity:160-180pcs/ 24 h
Power:18.5kw
Weight:22t
Wooden pallet molding machine
1, to gather the materials containing wood fiber and elimi-nate the impurities.
2, to crush the materials containing wood fiber.
3, to dry the creushed materials to 5% moisture content.
4, to evenly mix the dried materials with glue according to a certain proportion.
5, to fill the mixed materials into the mould and press.
6, to keep pressing for about 7 min.
The materials containling the wood fiber mentioned above refer to bagasse, bamboo, wasted wood timber, short lumber, straw etc.
Anything containing wooden fiber could be used as the rew materials.So the wide sources of raw materials save the manufacturing costs of the product to a great extent.
To guarantee the mixture performance of materials and glue, the moisture content should remain 5% after drying in step 3.
The adhesive mentioned above is urea formaldehyde glue or others.
In practical use, the measurement of pallet preformance depends on the static loading and dynamic loading.
wood shavings sawdust block pallet making machine wood pallet hot press machine
http://palletmachine.en.alibaba.com/product/60338837506-801850729/Single_head_Sawdust_block_machine_in_PAIMO.html
Product Application
The Making Sawdust block machine mainly includes three types of specifications--single head, double heads, three heads hot press wood pallet block making machine.
1. Wood pallet block making machine introduction:
Wood pallet block making machine is used to produce blocks for wood pallets. The working principle is that the hydraulic cylinder provides high pressure and pushes the piston to extrude and mold the materials. The heating of the heating plate at a high temperature promote the solidification and molding of urea-formaldehyde glue, and thus to increase the strength of the block. The products extruding from the compressed wood pallet block machine is cut according to certain length (usually around 1.2m). After cooling, then the second cutting. The reason for cooing is that the end product just formed by the machine is very hot and relatively soft, the temperature is about 60 degrees Fahrenheit. If cut the products at this time, the cut surface will be very rough. Then cut the long strips of half-finished products to the final size you need. The block will be made.
The block is used to make the wood pallet feet which is for the transportation or storage pallet. The final product could get the E1 grade. The pallet feet could be solid without hole in the center, also could be hollow.
Main Features
The advantages of final product from Sawdust block machine.
a, free of fumigation. Because the block is made by hot pressing, it is free of fumigation.
b, it could recycle the wood waste efficiently.
c, easy to operate. one person could handle 3 machines.
d, Density of final product could get to 550-1000kg/CBM. You could choose what you need.
Block Sizes of Wood Pallet Block Machine/block making machine
Normally 90*90mm, 90*100mm, 100*100mm,80*90mm. If you have special requirements, we could customise while it is at the range from 75mm to 145mm. Besides, one machine could make two different block sizes.
