Introduction
These test pumps are a fast, safe and simple method for hydrostatic testing, ideally suited to work with the above plugs or on a stand alone basis eg heat exchanger tubes, pipes, pressure vessels, hoses, etc.
These test pumps are for oil, water or aggressive medium are complete hydraulic units ready for connection which are provided for generating operating pressure up to 1,500bar.
The pressure will be generated by means of a pneumatically operated pump. The pump will be connected to the existing industrial compressed-air ductwork system.
Advantages
- Standstill of the pump when reaching the set final pressure
- No energy consumption in case of long pressure holding times
- No dissipated heat during the pressure holding phase
- Substitute of leakage by automatic re-delivery through the pump
- Regulator to control inlet air supply
- High pressure bleed valve and high pressure outlet
- Simple air-driven pump
- Test in the field or in the shop
- Simple installation, operationally reliable, easy to maintain
Introduction
These test pumps are a fast, safe and simple method for hydrostatic testing, ideally suited to work with the above plugs or on a stand alone basis eg heat exchanger tubes, pipes, pressure vessels, hoses, etc.
These test pumps are for oil, water or aggressive medium are complete hydraulic units ready for connection which are provided for generating operating pressure up to 1,500bar.
The pressure will be generated by means of a pneumatically operated pump. The pump will be connected to the existing industrial compressed-air ductwork system.
Advantages
- Standstill of the pump when reaching the set final pressure
- No energy consumption in case of long pressure holding times
- No dissipated heat during the pressure holding phase
- Substitute of leakage by automatic re-delivery through the pump
- Regulator to control inlet air supply
- High pressure bleed valve and high pressure outlet
- Simple air-driven pump
- Test in the field or in the shop
- Simple installation, operationally reliable, easy to maintain
Introduction
These test pumps are a fast, safe and simple method for hydrostatic testing, ideally suited to work with the above plugs or on a stand alone basis eg heat exchanger tubes, pipes, pressure vessels, hoses, etc.
These test pumps are for oil, water or aggressive medium are complete hydraulic units ready for connection which are provided for generating operating pressure up to 1,500bar.
The pressure will be generated by means of a pneumatically operated pump. The pump will be connected to the existing industrial compressed-air ductwork system.
Advantages
- Standstill of the pump when reaching the set final pressure
- No energy consumption in case of long pressure holding times
- No dissipated heat during the pressure holding phase
- Substitute of leakage by automatic re-delivery through the pump
- Regulator to control inlet air supply
- High pressure bleed valve and high pressure outlet
- Simple air-driven pump
- Test in the field or in the shop
- Simple installation, operationally reliable, easy to maintain
Introduction
These test pumps are a fast, safe and simple method for hydrostatic testing, ideally suited to work with the above plugs or on a stand alone basis eg heat exchanger tubes, pipes, pressure vessels, hoses, etc.
These test pumps are for oil, water or aggressive medium are complete hydraulic units ready for connection which are provided for generating operating pressure up to 1,500bar.
The pressure will be generated by means of a pneumatically operated pump. The pump will be connected to the existing industrial compressed-air ductwork system.
Advantages
- Standstill of the pump when reaching the set final pressure
- No energy consumption in case of long pressure holding times
- No dissipated heat during the pressure holding phase
- Substitute of leakage by automatic re-delivery through the pump
- Regulator to control inlet air supply
- High pressure bleed valve and high pressure outlet
- Simple air-driven pump
- Test in the field or in the shop
- Simple installation, operationally reliable, easy to maintain
Introduction
These test pumps are a fast, safe and simple method for hydrostatic testing, ideally suited to work with the above plugs or on a stand alone basis eg heat exchanger tubes, pipes, pressure vessels, hoses, etc.
These test pumps are for oil, water or aggressive medium are complete hydraulic units ready for connection which are provided for generating operating pressure up to 1,500bar.
The pressure will be generated by means of a pneumatically operated pump. The pump will be connected to the existing industrial compressed-air ductwork system.
Advantages
- Standstill of the pump when reaching the set final pressure
- No energy consumption in case of long pressure holding times
- No dissipated heat during the pressure holding phase
- Substitute of leakage by automatic re-delivery through the pump
- Regulator to control inlet air supply
- High pressure bleed valve and high pressure outlet
- Simple air-driven pump
- Test in the field or in the shop
- Simple installation, operationally reliable, easy to maintain
Introduction
These test pumps are a fast, safe and simple method for hydrostatic testing, ideally suited to work with the above plugs or on a stand alone basis eg heat exchanger tubes, pipes, pressure vessels, hoses, etc.
These test pumps are for oil, water or aggressive medium are complete hydraulic units ready for connection which are provided for generating operating pressure up to 1,500bar.
The pressure will be generated by means of a pneumatically operated pump. The pump will be connected to the existing industrial compressed-air ductwork system.
Advantages
- Standstill of the pump when reaching the set final pressure
- No energy consumption in case of long pressure holding times
- No dissipated heat during the pressure holding phase
- Substitute of leakage by automatic re-delivery through the pump
- Regulator to control inlet air supply
- High pressure bleed valve and high pressure outlet
- Simple air-driven pump
- Test in the field or in the shop
- Simple installation, operationally reliable, easy to maintain
Water solubility dissolvable frac plug is a total new block-off downhole tool developed from conventional bridge plug. It organically mixes the patent soluble material, polymer degradable material and high strength ceramic technology, thus gets an outstanding performance of mechanism, solubility and degradation for the multi-staged fracture operation in the oil and gas well.
The body of dissolvable frac plug applies miscellaneous soluble metal materials, as well as that the rubber applies polymer degradable material; The dissolvable packer has 70Mpa pressure strength. According to different working condition, the dissolvable packer has tailored formula for different solubility time in order that releasing the reservoir block of horizontal well and highly deviated well automatically.
Characteristics
- Made of compound high strength soluble metals, guarantee the material strength under high temperature.
- Customized formula and the solubility time is flexible.
- Special high strength compound slips(max. Strength 1250Mpa), it is stable to long 15 days.
- Special cracking technology
- Good compatibility and inheritance, unnecessary to change existing strings structure, no risks resulted from drilling out and reduce the damage of casings.
Water solubility dissolvable frac plug is a total new block-off downhole tool developed from conventional bridge plug. It organically mixes the patent soluble material, polymer degradable material and high strength ceramic technology, thus gets an outstanding performance of mechanism, solubility and degradation for the multi-staged fracture operation in the oil and gas well.
The body of dissolvable frac plug applies miscellaneous soluble metal materials, as well as that the rubber applies polymer degradable material; The dissolvable packer has 70Mpa pressure strength. According to different working condition, the dissolvable packer has tailored formula for different solubility time in order that releasing the reservoir block of horizontal well and highly deviated well automatically.
Characteristics
- Made of compound high strength soluble metals, guarantee the material strength under high temperature.
- Customized formula and the solubility time is flexible.
- Special high strength compound slips(max. Strength 1250Mpa), it is stable to long 15 days.
- Special cracking technology
- Good compatibility and inheritance, unnecessary to change existing strings structure, no risks resulted from drilling out and reduce the damage of casings.
Water solubility dissolvable frac plug is a total new block-off downhole tool developed from conventional bridge plug. It organically mixes the patent soluble material, polymer degradable material and high strength ceramic technology, thus gets an outstanding performance of mechanism, solubility and degradation for the multi-staged fracture operation in the oil and gas well.
The body of dissolvable frac plug applies miscellaneous soluble metal materials, as well as that the rubber applies polymer degradable material; The dissolvable packer has 70Mpa pressure strength. According to different working condition, the dissolvable packer has tailored formula for different solubility time in order that releasing the reservoir block of horizontal well and highly deviated well automatically.
Characteristics
- Made of compound high strength soluble metals, guarantee the material strength under high temperature.
- Customized formula and the solubility time is flexible.
- Special high strength compound slips(max. Strength 1250Mpa), it is stable to long 15 days.
- Special cracking technology
- Good compatibility and inheritance, unnecessary to change existing strings structure, no risks resulted from drilling out and reduce the damage of casings.
Water solubility dissolvable frac plug is a total new block-off downhole tool developed from conventional bridge plug. It organically mixes the patent soluble material, polymer degradable material and high strength ceramic technology, thus gets an outstanding performance of mechanism, solubility and degradation for the multi-staged fracture operation in the oil and gas well.
The body of dissolvable frac plug applies miscellaneous soluble metal materials, as well as that the rubber applies polymer degradable material; The dissolvable packer has 70Mpa pressure strength. According to different working condition, the dissolvable packer has tailored formula for different solubility time in order that releasing the reservoir block of horizontal well and highly deviated well automatically.
Characteristics
- Made of compound high strength soluble metals, guarantee the material strength under high temperature.
- Customized formula and the solubility time is flexible.
- Special high strength compound slips(max. Strength 1250Mpa), it is stable to long 15 days.
- Special cracking technology
- Good compatibility and inheritance, unnecessary to change existing strings structure, no risks resulted from drilling out and reduce the damage of casings.
Water solubility dissolvable frac plug is a total new block-off downhole tool developed from conventional bridge plug. It organically mixes the patent soluble material, polymer degradable material and high strength ceramic technology, thus gets an outstanding performance of mechanism, solubility and degradation for the multi-staged fracture operation in the oil and gas well.
The body of dissolvable frac plug applies miscellaneous soluble metal materials, as well as that the rubber applies polymer degradable material; The dissolvable packer has 70Mpa pressure strength. According to different working condition, the dissolvable packer has tailored formula for different solubility time in order that releasing the reservoir block of horizontal well and highly deviated well automatically.
Characteristics
- Made of compound high strength soluble metals, guarantee the material strength under high temperature.
- Customized formula and the solubility time is flexible.
- Special high strength compound slips(max. Strength 1250Mpa), it is stable to long 15 days.
- Special cracking technology
- Good compatibility and inheritance, unnecessary to change existing strings structure, no risks resulted from drilling out and reduce the damage of casings.
Water solubility dissolvable frac plug is a total new block-off downhole tool developed from conventional bridge plug. It organically mixes the patent soluble material, polymer degradable material and high strength ceramic technology, thus gets an outstanding performance of mechanism, solubility and degradation for the multi-staged fracture operation in the oil and gas well.
The body of dissolvable frac plug applies miscellaneous soluble metal materials, as well as that the rubber applies polymer degradable material; The dissolvable packer has 70Mpa pressure strength. According to different working condition, the dissolvable packer has tailored formula for different solubility time in order that releasing the reservoir block of horizontal well and highly deviated well automatically.
Characteristics
- Made of compound high strength soluble metals, guarantee the material strength under high temperature.
- Customized formula and the solubility time is flexible.
- Special high strength compound slips(max. Strength 1250Mpa), it is stable to long 15 days.
- Special cracking technology
- Good compatibility and inheritance, unnecessary to change existing strings structure, no risks resulted from drilling out and reduce the damage of casings.
Introduction
These test pumps are a fast, safe and simple method for hydrostatic testing, ideally suited to work with the above plugs or on a stand alone basis eg heat exchanger tubes, pipes, pressure vessels, hoses, etc.
These test pumps are for oil, water or aggressive medium are complete hydraulic units ready for connection which are provided for generating operating pressure up to 1,500bar.
The pressure will be generated by means of a pneumatically operated pump. The pump will be connected to the existing industrial compressed-air ductwork system.
Advantages
- Standstill of the pump when reaching the set final pressure
- No energy consumption in case of long pressure holding times
- No dissipated heat during the pressure holding phase
- Substitute of leakage by automatic re-delivery through the pump
- Regulator to control inlet air supply
- High pressure bleed valve and high pressure outlet
- Simple air-driven pump
- Test in the field or in the shop
- Simple installation, operationally reliable, easy to maintain
Water solubility dissolvable frac plug is a total new block-off downhole tool developed from conventional bridge plug. It organically mixes the patent soluble material, polymer degradable material and high strength ceramic technology, thus gets an outstanding performance of mechanism, solubility and degradation for the multi-staged fracture operation in the oil and gas well.
The body of dissolvable frac plug applies miscellaneous soluble metal materials, as well as that the rubber applies polymer degradable material; The dissolvable packer has 70Mpa pressure strength. According to different working condition, the dissolvable packer has tailored formula for different solubility time in order that releasing the reservoir block of horizontal well and highly deviated well automatically.
Characteristics
- Made of compound high strength soluble metals, guarantee the material strength under high temperature.
- Customized formula and the solubility time is flexible.
- Special high strength compound slips(max. Strength 1250Mpa), it is stable to long 15 days.
- Special cracking technology
- Good compatibility and inheritance, unnecessary to change existing strings structure, no risks resulted from drilling out and reduce the damage of casings.
These test pumps are a fast, safe and simple method for hydrostatic testing, ideally suited to work with the above plugs or on a stand alone basis eg heat exchanger tubes, pipes, pressure vessels, hoses, etc.
These test pumps are for oil, water or aggressive medium are complete hydraulic units ready for connection which are provided for generating operating pressure up to 1,500bar.
The pressure will be generated by means of a pneumatically operated pump. The pump will be connected to the existing industrial compressed-air ductwork system.
Advantages
- Standstill of the pump when reaching the set final pressure
- No energy consumption in case of long pressure holding times
- No dissipated heat during the pressure holding phase
- Substitute of leakage by automatic re-delivery through the pump
- Regulator to control inlet air supply
- High pressure bleed valve and high pressure outlet
- Simple air-driven pump
- Test in the field or in the shop
- Simple installation, operationally reliable, easy to maintain
Water solubility dissolvable frac plug is a total new block-off downhole tool developed from conventional bridge plug. It organically mixes the patent soluble material, polymer degradable material and high strength ceramic technology, thus gets an outstanding performance of mechanism, solubility and degradation for the multi-staged fracture operation in the oil and gas well.
The body of dissolvable frac plug applies miscellaneous soluble metal materials, as well as that the rubber applies polymer degradable material; The dissolvable packer has 70Mpa pressure strength. According to different working condition, the dissolvable packer has tailored formula for different solubility time in order that releasing the reservoir block of horizontal well and highly deviated well automatically.
Characteristics
- Made of compound high strength soluble metals, guarantee the material strength under high temperature.
- Customized formula and the solubility time is flexible.
- Special high strength compound slips(max. Strength 1250Mpa), it is stable to long 15 days.
- Special cracking technology
- Good compatibility and inheritance, unnecessary to change existing strings structure, no risks resulted from drilling out and reduce the damage of casings.
Introduction
These test pumps are a fast, safe and simple method for hydrostatic testing, ideally suited to work with the above plugs or on a stand alone basis eg heat exchanger tubes, pipes, pressure vessels, hoses, etc.
These test pumps are for oil, water or aggressive medium are complete hydraulic units ready for connection which are provided for generating operating pressure up to 1,500bar.
The pressure will be generated by means of a pneumatically operated pump. The pump will be connected to the existing industrial compressed-air ductwork system.
Advantages
- Standstill of the pump when reaching the set final pressure
- No energy consumption in case of long pressure holding times
- No dissipated heat during the pressure holding phase
- Substitute of leakage by automatic re-delivery through the pump
- Regulator to control inlet air supply
- High pressure bleed valve and high pressure outlet
- Simple air-driven pump
- Test in the field or in the shop
- Simple installation, operationally reliable, easy to maintain
Introduction
These test pumps are a fast, safe and simple method for hydrostatic testing, ideally suited to work with the above plugs or on a stand alone basis eg heat exchanger tubes, pipes, pressure vessels, hoses, etc.
These test pumps are for oil, water or aggressive medium are complete hydraulic units ready for connection which are provided for generating operating pressure up to 1,500bar.
The pressure will be generated by means of a pneumatically operated pump. The pump will be connected to the existing industrial compressed-air ductwork system.
Advantages
- Standstill of the pump when reaching the set final pressure
- No energy consumption in case of long pressure holding times
- No dissipated heat during the pressure holding phase
- Substitute of leakage by automatic re-delivery through the pump
- Regulator to control inlet air supply
- High pressure bleed valve and high pressure outlet
- Simple air-driven pump
- Test in the field or in the shop
- Simple installation, operationally reliable, easy to maintain
These test pumps are a fast, safe and simple method for hydrostatic testing, ideally suited to work with the above plugs or on a stand alone basis eg heat exchanger tubes, pipes, pressure vessels, hoses, etc.
These test pumps are for oil, water or aggressive medium are complete hydraulic units ready for connection which are provided for generating operating pressure up to 1,500bar.
The pressure will be generated by means of a pneumatically operated pump. The pump will be connected to the existing industrial compressed-air ductwork system.
Advantages
- Standstill of the pump when reaching the set final pressure
- No energy consumption in case of long pressure holding times
- No dissipated heat during the pressure holding phase
- Substitute of leakage by automatic re-delivery through the pump
- Regulator to control inlet air supply
- High pressure bleed valve and high pressure outlet
- Simple air-driven pump
- Test in the field or in the shop
- Simple installation, operationally reliable, easy to maintain
These test pumps are a fast, safe and simple method for hydrostatic testing, ideally suited to work with the above plugs or on a stand alone basis eg heat exchanger tubes, pipes, pressure vessels, hoses, etc.
These test pumps are for oil, water or aggressive medium are complete hydraulic units ready for connection which are provided for generating operating pressure up to 1,500bar.
The pressure will be generated by means of a pneumatically operated pump. The pump will be connected to the existing industrial compressed-air ductwork system.
Advantages
- Standstill of the pump when reaching the set final pressure
- No energy consumption in case of long pressure holding times
- No dissipated heat during the pressure holding phase
- Substitute of leakage by automatic re-delivery through the pump
- Regulator to control inlet air supply
- High pressure bleed valve and high pressure outlet
- Simple air-driven pump
- Test in the field or in the shop
- Simple installation, operationally reliable, easy to maintain
These test pumps are a fast, safe and simple method for hydrostatic testing, ideally suited to work with the above plugs or on a stand alone basis eg heat exchanger tubes, pipes, pressure vessels, hoses, etc.
These test pumps are for oil, water or aggressive medium are complete hydraulic units ready for connection which are provided for generating operating pressure up to 1,500bar.
The pressure will be generated by means of a pneumatically operated pump. The pump will be connected to the existing industrial compressed-air ductwork system.
Advantages
- Standstill of the pump when reaching the set final pressure
- No energy consumption in case of long pressure holding times
- No dissipated heat during the pressure holding phase
- Substitute of leakage by automatic re-delivery through the pump
- Regulator to control inlet air supply
- High pressure bleed valve and high pressure outlet
- Simple air-driven pump
- Test in the field or in the shop
- Simple installation, operationally reliable, easy to maintain
Introduction
These test pumps are a fast, safe and simple method for hydrostatic testing, ideally suited to work with the above plugs or on a stand alone basis eg heat exchanger tubes, pipes, pressure vessels, hoses, etc.
These test pumps are for oil, water or aggressive medium are complete hydraulic units ready for connection which are provided for generating operating pressure up to 1,500bar.
The pressure will be generated by means of a pneumatically operated pump. The pump will be connected to the existing industrial compressed-air ductwork system.
Advantages
- Standstill of the pump when reaching the set final pressure
- No energy consumption in case of long pressure holding times
- No dissipated heat during the pressure holding phase
- Substitute of leakage by automatic re-delivery through the pump
- Regulator to control inlet air supply
- High pressure bleed valve and high pressure outlet
- Simple air-driven pump
- Test in the field or in the shop
- Simple installation, operationally reliable, easy to maintain
