Stainless steel used in construction, stainless steel with good corrosion resistance, so it can make the structural components are permanently maintain the integrity of the design. Chromium stainless steel mechanical strength and high elongation in one, easy parts manufacturing, can meet the needs of architects and architects. After the first successful practical application, stainless steel profiles with standard specifications of stainless steel angle bars, flat and square steel bars.
http://www.sellsteels.com/stainless-steel/stainless-steel-angle.html
Used in applications in which there are extremely stringent requirements for protection against vibration and noise.
Boiler tubes and pipes are strongly demanded in order to satisfy especially strict usage conditions, along with operational reliability. We conducts strict quality control in all processes, from steel-making to tube and pipe-making, and we have established the following quality assurance system.
http://www.sellsteels.com/steel-pipe/SA213.html
Gas cylinder tube is one of seamless steel tubes, widely applied in our works and lives. Cheap prices and high quality is reasons why customers in over 30 countries and regions choose us.
http://www.ansonpipes.com/product/Cylinders-Steel.html
Valve is the control of fluid delivery system components, globe, regulation, diversion, preventing upstream, regulator, bypass or overflow the pressure relief function.
Valves for fluid control systems, from the most simple valves to complex automatic control system used by the various valves, its variety and size range. Valves are designed to control air, water, steam, corrosive media, mud, oil, liquid metals and radioactive medium, such as various types of fluid flow. Valve according to the material divided into cast iron valves, cast steel valve, stainless steel valve (201, 304, 316), chromium-molybdenum steel valve, chromium-molybdenum-vanadium steel valves, duplex steel valves, plastic valves, non-standard custom valve material.
http://www.sellsteels.com/steel-fitting/valve.html
Our domain expertise has enabled us to offer an excellent collection of Fish Plate Rail. This product is manufactured using premium quality raw material and advanced technology. Further, our quality controllers check this product on stringent parameters for ensuring its compliance with the defined industry norms. In addition to this, our esteemed clients can avail these products from us in various customized options.
Allow a high level of track elasticity to be achieved. Sylomer and sylodyn ballast mats are installed for reduction of secondary airborne noise, vibrations. Also they are installed in areas with very low ballast depth.
Hexagon screw spike includes several different sizes such as:m22*145, m22*155, m22*165, m22*185, m22*195, and so on.
With the square neck and countersunk head and two different heads of flat and domed design, anson bolts can fix your blades & cutting edges firmly in place and make the best performance on working.Available production capacity from 3/8"-1-3/8" diameter and length to 17", quality can be produced as your demand like grade 10.9 or grade 12.9 or other nominated material. Whilst accept to mark the logo as yours conditions on acceptable order quantity.
Professional manufacturer for track bolts and nuts, main applied on heavy machinery on track shoes connect and assembly, Head design as actual application with domed hex. & hex. & with flanges. Quality can be made as your demand like Grade 10.9 or Grade 12.9 or other nominated material. Whilst accept to mark the logo as yours conditions on acceptable order quantity.
Professional manufacturer for segment bolts and nuts production, main applied on heavy machinery on sprockets assembly and small segments repair works. Generally, bolts' design as actual application with hexagonal and half-moon head, whilst, the design of unthread rod diameter is bigger than thread rod diameter can guarantee the best strength to be hold on working well in field. Whilst, nuts' design is also thicker than common. Whilst accept to mark the logo as yours conditions on acceptable order quantity.
http://railsteels.com/rail_bolt_18.html
Design from round head with square necks, common used in wood connections..Jetty do have more stocks for various sizes on carriage bolts at full thread. Available production capacity from 3/8"-1-3/8" diameter and length to 17", and the quality as grade 10.9..No nuts matched.
Tees for pipe fittings. Also called pipe tees.Three-way joint, with the main line to branch office.Tee is a three hole, namely an import, two exits; or two import, an export of a chemical pipe fittings, t and y-shaped, size orifice, nozzles with different diameters, for three of the same or different lines of the Survey Office. Tee's main role is to change the direction of flow.
http://www.sellsteels.com/steel-fitting/tees.html
Elbow is changing the direction of pipeline fittings. Press point, 45 and 90 180 the three most commonly used, according to the project needs to include other irregular angles, 60 elbow. Bend materials cast iron, stainless steel, alloy steels, malleable cast iron, carbon steel, non-ferrous metals and plastics. And the pipe connections are: direct soldering (the most common way) flanged connections, hot-melt, fused connection, threaded and socket connections and so on. According to the production process can be divided into: welding stamping elbows, elbows, pushing elbows, casting such as elbows, butt welding elbows. Other names: 90 degree bent elbow, right angle bend, love and so on.
www.sellsteels.com/steel-fitting/elbow.html
Flanged pipes and pipe connection between parts, used for connections between pipe ends; also used in flange on the import and export of equipment, used for the connection between the two devices, such as reducer flange. Flanged connection or blank flange, refers to flanges, gasket and bolts connected as a combination of the three sealing detachable connections. Pipe flange means plumbing piping flanges, used on a device means the device inlet and outlet flange. Holes on flange, bolt the two flanges abut. Flange with gasket seal. Flange screw connection (screw connection) welding of flanges, flange and clamp flanges. Flanges are used in pairs, low pressure pipe you can use wire flange, four kg of pressure welding flange. Between the two flanges with gaskets and bolt. Pressure flange thickness, they use bolts are different. Pumps and valves, and piping connections, equipment parts, also made corresponding flange shape, also known as a flanged connection. Usually around two planes use bolts enclosed attached parts, generally referred to as "flange", such as the ventilation pipe connection, such parts can be referred to as "parts such as flange. But this connection is only part of a device, such as flange connections and pumps, well pumps called flange part.Smaller valves, etc, can be called flange part.
http://www.sellsteels.com/steel-fitting/flange.html
International mechanical tube sizes for your reference, and seamless pipe manufacturing process help you get a clear idea about company equipment and capacity.
http://www.sellsteels.com/steel-pipe/SA213.html
We carry a full range of seamless steel pipe products in a variety of sizes to meet the structural piping requirements for applications the water, from 5.1-35mm wall thickness.
Http://www.Sellsteels.Com/steel-pipe/
All kinds of stainless, carbon and alloy steel pipe fittings and flanges are provided to meet your every demand, including weld fittings, forged steel, flanges and more.
http://www.sellsteels.com/steel-fitting/
Our material is medium carbon steel .
A screw spike, rail screw (or lag bolt) is a large (~6 in or 152 mm length, slightly under 1 in or 25 mm) metal screw used to fix a tie plate or fasten rail. Screw spikes are fixed into a hole bored in the sleeper. The screw spike has a higher cost to manufacture than the rail spike but has the advantage of greater fixing power; approximately twice that of a rail spike, and can be used in combination with spring washers.
Double-head screw spike, also called two-end-head screw spike, is used with nabla clip fastening system, especially popular in africa.
http://railsteels.com/railroad_spike_17.html
We are a leading and reputed manufacturer of qualified railway products in china since 2013, have got the production license of china railway ministry on railway products. We supply to thailand railway, indonesia railway, zambia railway, american railway etc for years.
Rail anchors are always used in rails such as 50kg, 85kg, uic54, uic60, 90/91lb, 115re, 136re, just to name a few. Anson can produce t or v-shaped rail anchors as well as other types according to clients requirements, by forging or casting.
Our professionals conduct various tests on the products so as to make sure these are flawless. Furthermore, our clamps are stored safely and systematically at our sophisticated warehousing facility prior delivering the same to clients. We offer these at industry leading prices to our clients.
We are manufacturers and suppliers of a wide range of rail clamp parts. These are made from high quality steel, which are sourced from market leading vendors. We offer our range in various designs and meet the specific requirement of our clients. Our range finds huge demand in the industry for the durability, easy installation, performance and quality features.
These are widely demanded in the market for features like:
Superior performance
Durability
Corrosion resistance
In order to match international quality standards, we manufacture these products as per the set standards of the industry. Moreover, our professionals make use of high grade raw material and technologically advanced machinery for manufacturing the entire range. These are widely used in various industries for different purposes.
Our organization offers unmatched quality of rail clamp 90 lbs b, which is extensively used in different industries namely steel plants, automobile companies and others. These are manufactured using best grade raw materials and acknowledged for the high tensile strength, anti corrosion finish and long functional life characteristics. We also provide customized solution to our clients as per their requirement.
These are manufactured using finest quality raw material, which is procured from trustworthy vendors of the market. Moreover, these are manufactured under the guidance of our experts who make sure these comply with the set standards of the industry. We also make sure these are delivered to clients within the stipulated time period.
With the support of our professionals, we offer superior grade cup type rail clamps at the most competitive prices. These are precisely designed and engineered under the guidance of our experts so as to make sure these abide by the set standards of the industry. Our clamps are offered in various specifications so as to meet the requirements of various industrial applications.
Our k type q235 railway clamp is made from low carbon steel or alloy steel by hot forging, rolling and casting, based on the requirements of our customers. We also produce rail clips in accordance with area, ranging from 52 lbs rail, 62 lbs rail, 114 lbs rail, 106 lbs rails, 120 lbs rails, 128 lbs rails, 171 lbs rails and 75 lbs rails.
Our stainless steel material and specifications, price concessions. Provide proof of stainless steel materials, SGS report. stainless steel band is also called tape, coil with hardness there. Stainless
http://www.sellsteels.com/stainless-steel/stainless-steel-coil.html
ASTM A106 Seamless Pressure Pipe covers seamless carbon steel nominal wall pipe for high-temperature service.
http://www.sellsteels.com/steel-pipe/A106.html
API 5L generally refers to pipeline--API 5L line pipe, line pipe is a ground spare oil, steam, water, transported by pipeline to the oil and gas industry pipeline include seamless and welded steel tubes, the tube end is flat, threaded and socket ends its connection for welding, collar connections, socket connections, and so on.
http://www.sellsteels.com/steel-pipe/API-5L.html
Stainless steel tube is a hollow circular steel strips, which are widely used in petroleum, chemical, medical, food, light industry, mechanical devices and other industrial pipeline and mechanical components. In addition, bending, torsional strength is the same as light in weight, it is also widely used in the manufacture of mechanical components and structures. Also used in producing a variety of conventional arms, barrel, shells etc.
http://www.sellsteels.com/stainless-steel/stainless-steel-pipe.html
Stainless steel pipe fittings is a kind of pipe, it is made of stainless steel material stainless steel tube, which contains: stainless steel elbow, stainless steel, stainless steel four-way, stainless steel reducers, stainless steel pipe caps, according to the connection method can be divided into the spigot and stainless steel pipe fittings, threaded stainless steel tube stainless steel pipe fittings, flanges, and welded stainless steel pipe fittings four categories. Stainless steel elbow pipe turn where parts used to make pipes and pipe connected to the flange, connected to the pipe end, stainless works on three tube collection of place; four-pipe stainless steel tube for collections where stainless steel pipe with different diameters in two pipes with different diameters connected place. Main stainless steel material: 304, 304L, 316, 316L.
http://www.sellsteels.com/stainless-steel/stainless-pipe-fittings.html
Stainless steel pipe is ideal for all structural applications where greater strength and superior corrosion resistance is required.
http://www.sellsteels.com/stainless-steel/stainless-steel-pipe.html
By the rich experience in railway industry, anson can offer clients an extensive range of rail fastening clips with the premium quality and excellent performance! they are to be used to fasten rails to underlying tie plates.The rail clips produced by us are made from the high grade spring steel supplied from the reliable and certified long term partner of steel mills . With more over 20 years experience on the rail clips production , anson has become the largest and most competitive production base of rail clips in southeast of china, qualified to tender nationally large and medium scaled rail projects under the china ministry of railways, both at home and abroad.
http://railsteels.com/steel-rail.html
U-shaped and u-shaped rail clip with front and rear camber, front ends to withhold on the bottom edge of the rail, then ends into iron slots after the back-end. Elastic raised relates to a fastener device installed in the adjustment of railway concrete sleeper used on rail height and gauge and withhold a fixed rail installation, consists of an insulated buffer pads, high-standard adjustable plate gauge and insulation mats, as well as iron, screw spikes and clips form. Raised with different specifications plate gauge and insulation pads can easily adjust the height of rail and gauge through the screw spike top nut clamping spring to withhold tight rail. The utility withheld power, easy adjustment and a wide range of adjustment.Http://railsteels.Com/rail_clip_16.Html.
Installed in high-speed rail lines and in lines with high axle loads, as well as in standard lines. No additional work at installation site required, as they can be installed on the sleepers during their production in the factory.
SA515Gr60 are moderate or low-temperature pressure vessel plates, carbon steel, implementation of ASME standards, Wugang 2006 research and development production, are widely used in petroleum, chemical, power plants, boiler industry.
SA515Gr60 are moderate or low-temperature pressure vessel plates, carbon steel, implementation of ASME standards, is widely used in petroleum, chemical, power plants, boiler industry, used in reactors, heat exchangers, separators, spherical tanks, gas tanks, gas tanks, nuclear reactor pressure vessel, boiler steam drum, LPG cylinders, hydropower stations and high pressure water pipes, hydroelectric turbine housing, such as equipment and components.
Excellent features:
SA516Gr60 meet (ASME) ASTMA515/A515M standard requirements and finished seek meet the needs of oil and gas with high content of sulfur and hydrogen, reduced sulfur and hydrogen corrosion and reduce maintenance, increase the service life of the device. The plate has to feature: good impact resistance, low temperature deformation, good weldability, good fatigue resistance, and good layer sprinkle crack, alloying, high purity, low carbon equivalent, strong resistance to sulfur and hydrogen, has good dimensional tolerances and surface quality of the product.
http://www.sellsteels.com/steel-plate/SA515Gr60.html
Stainless steel smooth surface high plasticity, toughness and mechanical strength, acid and alkali corrosive gases, solutions and other media. It is not easy to rust the steel, but not absolutely no rust. Stainless steel plate refers to the atmosphere, steam and water, weak corrosion of steel plate, and acid-resistant steel plate refers to acid, alkali, salt and other chemical erosion corrosion of steel.
Stainless steel is stainless steel and acid-resistant steel in General. Stainless steel plate refers to the atmosphere, steam and water, weak corrosion of steel plate, and acid-resistant steel plate refers to acid, alkali, salt and other chemical erosion corrosion of steel.
http://www.sellsteels.com/stainless-steel/stainless-steel-plate.html
ANSON supplies stock stainless steel plates, including 304, 316 and 321. We are able to provide any size and grade
http://www.sellsteels.com/stainless-steel/stainless-steel-plate.html
Fish plate bolt as per as1085.4-1999.We produce the fish plate bolt as per as1085.4-1999. The nominal thread diameter is m20/m22/m24 and the thread of the fish bolts are finished square. A nominal 45 degree chamfer is to be provided to a depth slightly exceeding the depth of the thread, nut shall be in accordance with as/nzs 1252.Http://railsteels.Com/fish_bolt_31.Html.
ASTM A210 or ASME SA210 standard specification for seamless sedium-carbon steel boiler and superheater tubes.
http://www.sellsteels.com/steel-pipe/SA210.html
Weathering steel is a series of low alloy steels between normal steel and stainless steel, carbon steel adds a small amount of copper, nickel and other corrosion-resistant elements, and tough, plastic with stainless steel rolling, forming, welding and cutting, abrasion, high temperature, fatigue resistance properties; weather resistance for carbon steel 2~8 double coating for carbon steel 1.5~10 times. Mainly used in railway cars, bridges, towers and other long-term use of steel exposed to the atmosphere.
http://www.sellsteels.com/steel-plate/A588M.html
We committed to meet our customers requirements of steel coil quality as well as ontime delivery and offer technical consultations and services for applications of our steel products.
http://www.sellsteels.com/stainless-steel/stainless-steel-coil.html
In the pipeline, in addition to the requirements has a high compressive strength, but also requires a high and low temperature toughness and excellent welding performance.Oil and gas transmission pipeline steel plate:(X42 L290NB, X46 , X52 L360NB, X56 , X60 L415NB, X65 L450MB , X70 L485MB, X80 L556MB). X70 used for West-East gas pipeline project pipeline steel compared to the yield strength of the steel X80 which corresponds to, but the tensile strength than steel X70.
ASTM A53 seamless steel pipe refers to the foreign standard steel grades, that is, beauty brand. A53-F corresponds to the domestic material q235, A53-A 10# corresponding domestic material, corresponding to A53-B 20# materials at home. Hot-rolled steel hot-rolled or heat treatment State of delivery.
http://www.sellsteels.com/steel-pipe/A53.html
ASTM A333 Grade 6 is the part of standard covers wall seamless and welded carbon and alloy steel pipe intended for use at low temperatures.
http://www.sellsteels.com/steel-pipe/A333.html
Alloy is steel pipe according to the production bills of material (or material) to define, by definition is made of alloy tubes and seamless steel pipe according to the production process (seam seamless) to define, the difference in seamless pipe is welded tubes, including straight seam welded pipe and spiral tubes.
http://www.ansonpipes.com/product/ASTM-SA335.html
Line pipe is manufactured from high-strength carbon steel, and is made to strict engineering and metallurgical specifications developed by the American Petroleum Institute (API).
One particular standard, API Specification 5L, defines requirements for pipe made to transport natural gas, oil and water. This specification includes standards for the dimensional, physical, mechanical, and chemical properties of the carbon steel. Several pipe mills around the world manufacture API 5L line pipe for the natural gas industry.
http://www.sellsteels.com/steel-pipe/API-5L.
Carbon steel pipe can be structural in nature or used in fluid, gas, oil transmission. We carry carbon steel piping in A500, A53, A106 and A252. AGICO carries a full inventory of carbon steel pipe products in a variety of sizes, grade and price to meet
http://www.sellsteels.com/steel-pipe/A106.
S355 structural steel plate is a high-strength low-alloy European standard structural steel covering four of the six "Parts" within the EN 10025 – 2004 standard. With minimum yield of 50,000 KSI, it meets requirements in chemistry and physical properties similar to ASTM A572 / 709. Careful attention should always be placed on the specific variation of S355 required if considering substitute material.S355 is used in almost every facet of structural fabrication.
High-strength low-alloy structural steel plate, thick 8~300mm A572Gr50 high strength low alloy structural steel is widely used in engineering structures, such as the construction of steel structures, construction machinery, mining machinery, heavy-duty trucks, bridges, pressure vessels, especially for good weldability and toughness of the architectural and engineering mechanical components.
A572Gr50 is a low alloyed steel, for steel structures. Alloy content than S355Jr. Our company can provide A572Gr50 plates and profiles or steel into semi-finished products according to your needs.
http://www.sellsteels.com/steel-plate/A572Gr50.html
SA516Gr.70 belongs to the moderate or low carbon steel plates for pressure vessels, implementation of the ASME standard. In order to meet the different requirements of users, ease of management, for the steel grades s and p requirements are divided into ?, ?, ? of the three levels.
Carbon steel plate stock from ANSON come in a variety of widths, lengths, thickness and properties for your industrial needs. High quality carbon steel plate with fabrication services is well received.
http://www.sellsteels.com/steel-plate/A283.html
A high strength low alloy steel plate--- ductile, high formable and weldable, is widely used in structural applications such as buildings and bridges.
http://www.sellsteels.com/steel-plate/SA515Gr60.html
Pipeline steel plate is rolled according to API standard and widely used to transport oil, natural gas and other large diameter welded steel pipes.
http://www.sellsteels.com/steel-plate/API-Spec-5L.html
Pressure vessel steel plate is used in the manufacture of boilers and vessels for low pressure applications with different thickness, available at A516,A612,A537,A285
http://www.sellsteels.com/steel-plate/SA516Gr70.html
Abrasion resistant steel plates offer endure resistance to sliding and impact abrasion. Wear resistant steel plates are available at AR235,AR400,AR450,AR500,AR600.
CORTEN has served as weathering steel.
http://www.sellsteels.com/steel-plate/A588M.html
Owing to its quality features like strong design, excellent performance and corrosion resistance, this product is widely acknowledged by our clients from every nook corner of the world. The offered product is made available in a range of customized options.
These products are checked against various parameters under the strict supervision of quality inspectors to ensure flawless deliveries. In addition to this, these products are made available in various sizes and can also be customized as per various specifications provided by our prestigious clients.
Our offered range is precisely manufactured by talented professionals by making use of cutting-edge technology and factory-tested material in compliance with set universal norms.
Apart from this, our quality controllers perform a series of testing procedures at every stage of production to eradicate any possible defect from. Clients can avail the entire products from us in multiple specifications as per their requirements.
Our offered products can be avail from us at market leading prices.
S235JR is the European standard of non-alloy structural steels, equivalent to GB Q235B, namely carbon structural steels with low carbon, usedfor welding, bolting, and more riveted structure.
Q235 quality grades A, B, C, D, E, followed by a poor-quality,e-quality is highest.Deoxidization method symbol for the F, b, z, TZ,representing steel,half-killed steel,steel and special steel,designation, TZ and Z symbol can be omitted. Q235A, Q235B, Q235C, Q235D, Q235E representation of the different levels, primarily impact of temperature difference.
http://www.sellsteels.com/steel-plate/S235JR.html
For low and medium pressure boiler (working pressure is not greater than 5.88Mpa, working temperature 450 c) heating surface pipes; for high pressure boilers (working pressure above 9.8Mpa, operating temperatures between 450 ~650 ) heating surface pipes, economizer, superheater, reheater, pipe for petrochemical industry, etc.
http://www.sellsteels.com/steel-pipe/SA213.html
Api5ct casing can be divided into seamless and welded steel tubes, welded steel tube mainly refers to the straight seam steel pipe, large diameter casing is generally straight seam submerged arc-welded steel tubes. Mainly used for transportation of oil, natural gas, coal gas, water and other liquids and gases. The main applications of the product, mainly distributed in the Middle East, Europe and North America. Api5ct according to the length of the casing can be divided into R-1,R-2 and R-3, three kinds of specifications.
http://www.sellsteels.com/steel-pipe/API-5CT.html
ANSON offers a full line of OCTG products that meet the industry's need. The OCTG is mainly used in Oil & Gas well.
http://www.sellsteels.com/steel-plate/API-Spec-5L.html
E-type rail insulators are used in E-clip fastening systems, together with E-clips, rail shoulders and rail pads, whose function is to cushion the passing train s stress onto the rail and make the rail back to position afterwards, similarly used as a rail pad under the rail track.
http://railsteels.com/rail_nylon_insulator_24.html
SKL rail insulators are also called guide plates, used in SKL fastening systems, combined with SKL tension clips, screw spikes, plastic dowels, flat washers and rail pads. Angle guide plate is used under tension clamp / SKL / to keep the rail in lateral position and the lateral forces are passed on to the concrete body by the means of Angle Guide plate.
http://railsteels.com/rail_nylon_insulator_24.html
Nabla rail insulators are used in Nabla clip rail fastening systems, working together with other fastener parts including Nabla clips, screw spikes and spring washers.
http://railsteels.com/rail_nylon_insulator_24.html
Anson specialized in producing rail fasteners, plastic dowels are our main products, they are pressed in concrete sleeper and assembly with sleeper screws /guide plate /rail clip to fix the rail .the material we use is HDPE and PA66 , with the color white /black /dark brown .
http://railsteels.com/rail_plastic_dowel_25.html
