Single screw kneader sheet extrusion
Model no: m55l/jdl100
Single screw l/d ratio: 25-36
Screw speed: 20-120r/min
Screw capacity: 250-350kg/h
Mixer motor power: 75kw
Material direction: back
Weight: 8500kg
Price: 75000 usd/set
Mixer capacity: 45-75kg/unit
Number of timers(mixer): 0.6-0.8unit/h
Mixer speed(before/after): 39/30rpm
Mixer size h*w*l: 3250*2300*3350mm
Features:
1.The characteristics of the machine is advanced design, high quality, good plasticizing and low energy consumption.
2.It has the advantages of low noise, smooth operation, large loading and long life.
3.The technology can be adjusted according to customer’s raw material.
Production process:
M mixer to zdl automatic winder, zdl forced feeding machine--the zdl single screw—molding—three-roll calender—tractor—plate corona treatment—cutting machine—piled up
Applicable materials:epdm, pe, poe, eva, pvc, materials plate/sheet etc.
Products:car roor, car trunk plate, car mats, car interiors , eva sheet, insulation sheet for vehicle, interior sound insulation pad, car carpet, front enclosed sheet and the side enclosed sheet;etc.
Single screw kneader sheet extruder (m75l)
Model no: m75l/jdl150
Feeder: 11kw conical feeder
Cutting mode: air cooling die-face hot cutting
Price: 100000 usd/set
Main motor power(single screw): 110kw
Single screw l/d ratio: 22:1
Screw speede: 20-96r/min
Screw capacity: 350-400kg/h
Motor power (mixer): 110kw
Material direction: back
Weight (mixer): 105000kg
Features:
1.The characteristics of the machine is advanced design, high quality, good
Plasticizing and low energy consumption.
2.It has the advantages of low noise, smooth operation, large loading and long
Life.
3.The technology can be adjusted according to customer’s raw material.
Production process:
M mixer to zdl automatic winder, zdl forced feeding machine--the zdl single
Screw—molding—three-roll calender—tractor—plate corona treatment—cutting
Machine—piled up
Applicable materials:epdm, pe, poe, eva, pvc, materials plate/sheet etc.
Products:car roor, car trunk plate, car mats, car interiors , eva sheet,
Insulation sheet for vehicle, interior sound insulation pad, car carpet, front
Enclosed sheet and the side enclosed sheet;etc.
Single Screw Kneader Sheet Extrusion
model no: M55L/JDL100
single screw L/D ratio: 25-36
screw speed: 20-120r/min
screw capacity: 250-350kg/h
mixer motor power: 75kw
material direction: back
weight: 8500kg
price: 75000 USD/SET
mixer capacity: 45-75kg/unit
number of timers(mixer): 0.6-0.8unit/h
mixer speed(before/after): 39/30rpm
mixer size H*W*L: 3250*2300*
Features:
1.The characteristics of the machine is advanced design, high quality, good
plasticizing and low energy consumption.
2.It has the advantages of low noise, smooth operation, large loading and long
life.
3.The technology can be adjusted according to customer’s raw material.
Production process:
M mixer to ZDL automatic winder,ZDL forced feeding machine--the ZDL single
screw—molding—three-roll calender—tractor—plate corona treatment—cutting
machine—piled up
Applicable materials:EPDM,PE,POE,EVA,PVC,materials plate/sheet etc.
Products:car roor, car trunk plate, car mats, car interiors ,EVA sheet,
insulation sheet for vehicle, interior sound insulation pad, car carpet, front
enclosed sheet and the side enclosed sheet;etc.
Product Description
model no:M10L/JS65
feeder: 3kw conical feeder
cutting mode: air cooling die-face hot cutting
price:50000 USD/SET
main motor power: 18.5kw
screw L/D ratio: 20:1
screw diameter: 62.4mm
screw rotating speed: 500rpm/min
screw torque: 680n.m
torque rating: 8.5 t/a2
capacity: 200-355kg/h
typeseriesL/DDiameter (mm)screw speed(r/min)motor power (kw)screw torquecapacity
JS20A32-48216004302-10
JS30A32-48305007.58510-30
B600118510-40
D60018.514030-75
JS36A32-4835.660018.5-2212530-75
D60030-3722540-100
JS52A32-6450.550045405120-200
B60045-75415155-255
D60075-90-110680255-400
JS65A32-6462.450055-75680200-355
B60075-90680255-400
D6001601200500-850
JS75A32-647150090-110995300-550
B600110-132-160995450-750
D6002501890750-1250
JS85B32-6481600
1660650-1100
D60035026401050-1750
JS95B32-6492400-500280-3152380950-1600
D55045101650-2750
Product Description
model: M20L/JDL80
mixer:20L
feeder: 7.5kw double-awl feeder
main motor power (single screw): 37kw
single screw L/D ratio: 22:1
packing: plastic film
price: 66666 USD/SET
capacity:150-220kg/h
screw speed: 20-120r/min
cutting motor: air cooling die-face hot cutting
Features:
1.Low maintenance,Robustness,Durable finish standards,Excellent functionality
2.High-efficient force-feeder ensures high capacity feeding, low energy consumption
3. Single screw extruder, equipped with specially designed screw & barrel, venting system, has a very good output capacity.
4. Our machine has two characteristics: high degree of automation and assembly line work.
5.The Pelleting machine has good dispersion effect.
6.The machine production is very high, and the work environment is very clean.
7.The technology can be adjusted according to customer's raw material.
Product Description
model no: JS65
price: 36666 USD/SET
high speed machine: 300L
twin screw diameter: 62.4mm
main motor power: 75kw
weight: 19.5T
capacity: 200-320kg/h
Features:
1.Low maintenance,Robustness,Durable finish standards,Excellent functionality
2.High-efficient force-feeder ensures high capacity feeding, low energy consumption
3. Our machine has two characteristics: high degree of automation and assembly line work.
4.The Pelleting machine has good dispersion effect.
5.The machine production is very high, and the work environment is very clean.
6.The technology can be adjusted according to customer's raw material.
Product Description
model: M55L/JDL120
mixer: 55L
feeder: 11kw conical feeder
main motor power (single screw): 75kw
single screw L/D ratio: 22:1
capacity: 300-350kg/h
screw speed: 20-120r/min
cutting motor: air cooling die-face hot cutting
Features:
1.Low maintenance,Robustness,Durable finish standards,Excellent functionality
2.High-efficient force-feeder ensures high capacity feeding, low energy consumption
3. Single screw extruder, equipped with specially designed screw & barrel, venting system, has a very good output capacity.
4. Our machine has two characteristics: high degree of automation and assembly line work.
5.The Pelleting machine has good dispersion effect.
6.The machine production is very high, and the work environment is very clean.
7.The technology can be adjusted according to customer's raw material.
Product Description
model no: M55L
capacity: 45-75kg/unit
number of times: 4-6unit/h
atomspheric pressure: 0.6-0.8mpa
main motor power: 75kw
tilting motor: 2.2kw
air cylinder diameter: 300cm
tilting angle: 140
speed (before/after): 32/25
weight: 8500kg
material direction: back
size H*W*L: 3250*2300*3350
price: 31666 USD/SET
Features:
1.This equipment possesses temperature and time control system for easy but accurate operation and best decentralization.
2.Tilt-able mixing chamber and mechanical shaft sealing design for easy cleaning and color changing.
3.Pressure sealed mixing chamber to assure the quality of mixed material and also prevent environment pollution.
4.The mixing chamber is made of soud alloy steel and work surface is hare chromin coated for supper anti-abrasion.
5.Electric control configuration can be designed according to customer's request.
6.energy saving,security,good operation,good dispersibility
7. low noise,long service life and low maintenance frequency
Twin screw sheet extruder (js75b)
Model no: js75b
Price: 52666 usd/set
High speed machine: 500l
Twin single motor diameter: 71mm
Main motor power: 132kw
Weight: 29.8t
Extrusino width: 1800mm
Extrusion thickness: 0.8-6mm
Capacity: 350-680kg/h
Features:
1.The characteristics of the machine is advanced design, high quality, good
Plasticizing and low energy consumption.
2.It has the advantages of low noise, smooth operation, large loading and long
Life.
3.The technology can be adjusted according to customer’s raw material.
Production process:
M mixer to zdl automatic winder, zdl forced feeding machine--the zdl single
Screw—molding—three-roll calender—tractor—plate corona treatment—cutting
Machine—piled up
Applicable materials:epdm, pe, poe, eva, pvc, materials plate/sheet etc.
Products:car roor, car trunk plate, car mats, car interiors , eva sheet,
Insulation sheet for vehicle, interior sound insulation pad, car carpet, front
Enclosed sheet and the side enclosed sheet;etc.
Imitation marble sheet extruder
Model no: jsj65/132
Main motor power: 37kw
Weight: 4000kg
Heating mode: electric heating
Cooling way: air cooling
Extrusion width: 800-1350mm
Extrusion thickness: 0.8-5.8mm
Capacity: 100-160kg/h
Price: 45000 usd/set
Features:
1.Low maintenance?robustness?durable finish standards?excellent
Functionality
2.High-efficient force-feeder ensures high capacity feeding, low energy
Consumption
3. Single screw extruder, equipped with specially designed screw & barrel,
Venting system, has a very good output capacity.
4. Our machine has two characteristics: high degree of automation and assembly
Line work.
5.The pelleting machine has good dispersion effect.
6.The machine production is very high, and the work environment is very clean.
7.The technology can be adjusted according to customer’s raw material.
Twin screw granulator
Model no: js65
Price: 36666 usd/set
Screw l/d ratio: 40:1
Screw diameter: 62.4mm
Screw rotating speed: 500r/min
Main motor power: 55-75kw
Screw torque: 680
Torque rating: 4.8
Capacity: 200-355kg/h
Features:
1.The characteristics of the machine is advanced design, high quality, good
Plasticizing and low energy consumption.
2.It has the advantages of low noise, smooth operation, large loading and long
Life.
3.The technology can be adjusted according to customer’s raw material.
Production process:
M mixer to zdl automatic winder, zdl forced feeding machine--the zdl single
Screw—molding—three-roll calender—tractor—plate corona treatment—cutting
Machine—piled up
Applicable materials:epdm, pe, poe, eva, pvc, materials plate/sheet etc.
Products:car roor, car trunk plate, car mats, car interiors , eva sheet,
Insulation sheet for vehicle, interior sound insulation pad, car carpet, front
Enclosed sheet and the side enclosed sheet;etc.
Single screw kneader sheet extrusion
Model no: m55l/jdl100
Single screw l/d ratio: 25-36
Screw speed: 20-120r/min
Screw capacity: 250-350kg/h
Mixer motor power: 75kw
Material direction: back
Weight: 8500kg
Price: 75000 usd/set
Mixer capacity: 45-75kg/unit
Number of timers(mixer): 0.6-0.8unit/h
Mixer speed(before/after): 39/30rpm
Mixer size h*w*l: 3250*2300*3350mm
Features:
1.The characteristics of the machine is advanced design, high quality, good plasticizing and low energy consumption.
2.It has the advantages of low noise, smooth operation, large loading and long life.
3.The technology can be adjusted according to customer’s raw material.
Production process:
M mixer to zdl automatic winder, zdl forced feeding machine--the zdl single screw—molding—three-roll calender—tractor—plate corona treatment—cutting machine—piled up
Applicable materials:epdm, pe, poe, eva, pvc, materials plate/sheet etc.
Products:car roor, car trunk plate, car mats, car interiors , eva sheet, insulation sheet for vehicle, interior sound insulation pad, car carpet, front enclosed sheet and the side enclosed sheet;etc.
Hydraulic pressurized kneader
Model no: m55l
Capacity: 45-75kg/unit
Number of times: 4-6unit/h
Atomspheric pressure: 0.6-0.8mpa
Main motor power: 75kw
Tilting motor: 2.2kw
Air cylinder diameter: 300cm
Tilting angle: 140
Speed (before/after): 32/25
Weight: 8500kg
Material direction: back
Size h*w*l: 3250*2300*3350
Price: 31666 usd/set
Configuration:
1.Hydraulic cylinders used for pressruing.
2.High-power transmission agent.
3.Adjustable rev of mixing shaft.
4.Combine the plc control and human-machine interface, avaliable to set up many milling modes which can display and memorize the data for each mixing process. As a newly diversifying intelligent type intermal mixer which adopts tipper hopper for discharging, so it is convenient to carry out wasing and easy to change the formulation, also the process time can be saved by 30%, so it is an ideal choice for rubber&plastic industry.
Mixer (110l)
Model no: m110l
Price: 53333 usd/set
Capacity: 100-140kg/unit
Number of times: 5-7unit/h
Main motor power: 160kw
Atmospheric pressure: 0.6-0.8mpa
Tilting motor: 5.5kw
Air cylinder diameter: 420cm
Tilting angle: 140
Speed (before/after): 32/25rpm
Weight:14000kg
Material direction: back
Size h*w*l: 4150mm*2950mm*3750mm
M55ljdl120 single screw granulator
Model: m20l/jdl80
Mixer:20l
Feeder: 7.5kw double-awl feeder
Main motor power (single screw): 37kw
Single screw l/d ratio: 22:1
Packing: plastic film
Price: 66666 usd/set
Capacity:150-220kg/h
Screw speed: 20-120r/min
Cutting motor: air cooling die-face hot cutting
Features:
1.Low maintenance?robustness?durable finish standards?excellent
Functionality
2.High-efficient force-feeder ensures high capacity feeding, low energy
Consumption
3. Single screw extruder, equipped with specially designed screw & barrel,
Venting system, has a very good output capacity.
4. Our machine has two characteristics: high degree of automation and assembly
Line work.
5.The pelleting machine has good dispersion effect.
6.The machine production is very high, and the work environment is very clean.
7.The technology can be adjusted according to customer’s raw material.
55L/120
Plastic Film
11kw
jiangsu, china
Features:
1. Our machine has two characteristics: high degree of automation and assembly line work.
2.The Pelleting machine has good dispersion effect.
3.The machine production is very high, and the work environment is very clean.
4.The technology can be adjusted according to customer's raw material.
110L/150
plastic film
11kw
jiangsu, china
Features:
1. Our machine has two characteristics: high degree of automation and assembly line work.
2.The Pelleting machine has good dispersion effect.
3.The machine production is very high, and the work environment is very clean.
4.The technology can be adjusted according to customer's raw material.
Irradiation cross-linking cable material granulator
M10L/JS65
mixer: 10L
feeder: 3kw conical feeder
cutting mode: Water strip
screw speed: 600r/min
capacity: 80-800kg/h
main motor power (twin screw): 18.5kw
L/D ratio: 20:1
Features:
1. Our machine has two characteristics: high degree of automation and assembly line work.
2.The Pelleting machine has good dispersion effect.
3.The machine production is very high, and the work environment is very clean.
4.The technology can be adjusted according to customer's raw material.
Inside and outside shielded cable material granulator
M75l/jzd150
Mixer: 75l
Feeder: 11kw conical feeder
Cutting mode: water ring die plate hot cutting
Screw speed: 105r/min
Capacity: 120-800kg/h
Main motor power(single screw): 110kw
Single screw l/d ratio: 22:1
Features:
1. Our machine has two characteristics: high degree of automation and assembly line work.
2.The pelleting machine has good dispersion effect.
3.The machine production is very high, and the work environment is very clean.
4.The technology can be adjusted according to customer's raw material.
Product Description
Irradiation cross-linking cable material granulator
model no: M10L/JS65
mixer: 10L
feeder: 3kw conical feeder
cutting mode: Water strip
screw speed: 600r/min
capacity: 80-800kg/h
main motor power (twin screw): 18.5kw
L/D ratio: 20:1
Features:
1.Low maintenance,Robustness,Durable finish standards,Excellent functionality
2.High-efficient force-feeder ensures high capacity feeding, low energy consumption
3.Our machine has two characteristics: high degree of automation and assembly line work.
4.The Pelleting machine has good dispersion effect.
5.The machine production is very high, and the work environment is very clean.
6.The technology can be adjusted according to customer's raw material.
Product Description
model no: 9 inches
roll size(d/l): 230*600
line speed:11.8m/min
front roll rpm: 16.5min
roll ratio(front/back): 1:1.27*
produce weight(once): 8-12kg
motor power:15kw
weight: 2800kg
container volume: 2.5m3
cooling mode: pressurized cooling rotating joint
bush: bearing type
material receiver: stainless steel material
energency stop: press button brake&foot brake
transmission: low noise gear box gear
price: 15000 USD/SET
Product Description
model no: M55L
capacity: 45-75kg/unit
number of times: 4-6unit/h
atomspheric pressure: 0.6-0.8mpa
main motor power: 75kw
tilting motor: 2.2kw
air cylinder diameter: 300cm
tilting angle: 140
speed (before/after): 32/25
weight: 8500kg
material direction: back
size H*W*L: 3250*2300*3350
price: 31666 USD/SET
Features:
1.This equipment possesses temperature and time control system for easy but accurate operation and best decentralization.
2.Tilt-able mixing chamber and mechanical shaft sealing design for easy cleaning and color changing.
3.Pressure sealed mixing chamber to assure the quality of mixed material and also prevent environment pollution.
4.The mixing chamber is made of soud alloy steel and work surface is hare chromin coated for supper anti-abrasion.
5.Electric control configuration can be designed according to customer's request.
Product Description
Car Interior Sheet Extruder
moder no:M55/JZD100
kneader: 55L
screw diameter: 100mm
main motor power: 75kw
weight: 23T
extrusion width: 1000mm
extrusion thickness: 0.8-6mm
capacity: 200-320kg/h
price: 70000 USD/SET
feeding way: rear feed
screw speed: 20-120r/min
L/D ratio: 25-36
Product Description
High-Torque Two-Stage Extruder Pelletizing
model no: M55L/JSJ65A(120)
feeder: 11kw conical feeder
price: 116666 USD/SET
cutting mode: air cooling die-face hot cutting
screw L/D ratio (the first stage): 32:1
screw L/D ratio (the second stage): 12:1
screw speed: 20-120r/min
capacity: 300-350kg/h
Features:
1.Low maintenance,Robustness,Durable finish standards,Excellent functionality
2.High-efficient force-feeder ensures high capacity feeding, low energy consumption
3. Our machine has two characteristics: high degree of automation and assembly line work.
4.The Pelleting machine has good dispersion effect.
5.The machine production is very high, and the work environment is very clean.
6.The technology can be adjusted according to customer's raw material.
type diameter(mm) L/D screw speed(r/min) motor power (kw) capacity(kg/h)
JSJ52/100 50.5 28-40:1 500 45 150-250
100 7-12:1 85 37
JSJ65/150 62.4 28-40:1 500 55-75 500-700
150 7-12:1 85 45-55
JSJ75/180 71 28-40:1 500 90-110 750-900
180 7-12:1 85 55-75
JSJ95/200 92 28-40:1 400-500 250-315 1000-1200
200 7-12:1 85 75-90
model volume Screw diameter Main motor(kw) weight
T Width mm thicknessmm Capacity (kg/h)
JS65B 300L 62.4mm 75 =19.5 =1000 0.8-6 200~320
JS75B 500L 71mm 132 =29.8 =1800 350~680
JS95B 800L 91mm 185 =39.4 =2150 800~1100
Features:
1.This equipment possesses temperature and time control system for easy but accurate operation and best decentralization.
2.Tilt-able mixing chamber and mechanical shaft sealing design for easy cleaning and color changing.
3.Pressure sealed mixing chamber to assure the quality of mixed material and also prevent environment pollution.
4.The mixing chamber is made of soud alloy steel and work surface is hare chromin coated for supper anti-abrasion.
5.Electric control configuration can be designed according to customer's request.
Drop Door Type Internal Mixer
model no: M110L
productivity: 1400kg/h
driving motor: 300/350hp
diameter of cylinder: 350mm
weight: 23000kg
speed of front rotor: 35rpm
speed of reart rotor: 30rpm
price: 53333 USD/SET
model volume Screw diameter Main motor(kw) weight
T Width mm thicknessmm Capacity (kg/h)
JS65B 300L 62.4mm 75 =19.5 =1000 0.8-6 200~320
JS75B 500L 71mm 132 =29.8 =1800 350~680
JS95B 800L 91mm 185 =39.4 =2150 800~1100
Product Description
Irradiation cross-linking cable material granulator
model no: M10L/JS65
mixer: 10L
feeder: 3kw conical feeder
cutting mode: Water strip
screw speed: 600r/min
capacity: 80-800kg/h
main motor power (twin screw): 18.5kw
L/D ratio: 20:1
Features:
1.Low maintenance,Robustness,Durable finish standards,Excellent functionality
2.High-efficient force-feeder ensures high capacity feeding, low energy consumption
3.Our machine has two characteristics: high degree of automation and assembly line work.
4.The Pelleting machine has good dispersion effect.
5.The machine production is very high, and the work environment is very clean.
6.The technology can be adjusted according to customer's raw material.
model volume Screw diameter Main motor(kw) weight
T Width mm thicknessmm Capacity (kg/h)
JS65B 300L 62.4mm 75 =19.5 =1000 0.8-6 200~320
JS75B 500L 71mm 132 =29.8 =1800 350~680
JS95B 800L 91mm 185 =39.4 =2150 800~1100
type model L/D screw speed (r/min) capacity
JD30 30 25-36 20-120 5-10
JD50 50 25-36 20-120 30-50
JD65 65 25-36 20-120 50-80
JD80 80 25-36 20-120 150-220
JD100 100 25-36 20-120 250-300
JD120 120 25-36 20-120 300-350
JD150 150 25-36 20-96 350-400
JD180 180 25-36 20-85 500-700
JD120 200 25-36 20-85 800-1000
Product Description
Silance cross-linked cable material granulator
model no: JS65
price: 36666 USD/SET
screw L/D ratio: 40:1
screw diameter: 62.4mm
screw rotating speed: 500r/min
main motor power: 55-75kw
screw torque: 680
torque rating: 4.8
capacity: 200-355kg/h
Features:
1.Low maintenance,Robustness,Durable finish standards,Excellent functionality
2.High-efficient force-feeder ensures high capacity feeding, low energy consumption
3. Our machine has two characteristics: high degree of automation and assembly line work.
4.The Pelleting machine has good dispersion effect.
5.The machine production is very high, and the work environment is very clean.
6.The technology can be adjusted according to customer's raw material.
modelvolumeScrew diameterMain motor(kw)weight
TWidth mmthicknessmmCapacity (kg/h)
JS65B300L62.4mm75=19.5=10000.8-6200~320
JS75B500L71mm132=29.8=1800350~680
JS95B800L91mm185=39.4=2150800~1100
model volume Screw diameter Main motor(kw) weight
T Width mm thicknessmm Capacity (kg/h)
JS65B 300L 62.4mm 75 =19.5 =1000 0.8-6 200~320
JS75B 500L 71mm 132 =29.8 =1800 350~680
JS95B 800L 91mm 185 =39.4 =2150 800~1100
Product Description
model no: JSJ65B/150
the first stage screw L/D ratio: 32:1
the second stage screw L/D ratio: 9:1
motor power (first stage): 55kw
motor power (second stage): 45kw
price: 51666 USD/SET
screw speed: 500/85r/min (first/second stage)
capacity: 500-700kg/h
Features:
1.Low maintenance,Robustness,Durable finish standards,Excellent functionality
2.High-efficient force-feeder ensures high capacity feeding, low energy consumption
3. Our machine has two characteristics: high degree of automation and assembly line work.
4.The Pelleting machine has good dispersion effect.
5.The machine production is very high, and the work environment is very clean.
6.The technology can be adjusted according to customer's raw material.
type diameter(mm) L/D screw speed(r/min) motor power (kw) capacity(kg/h)
JSJ52/100 50.5 28-40:1 500 45 150-250
100 7-12:1 85 37
JSJ65/150 62.4 28-40:1 500 55-75 500-700
150 7-12:1 85 45-55
JSJ75/180 71 28-40:1 500 90-110 750-900
180 7-12:1 85 55-75
JSJ95/200 92 28-40:1 400-500 250-315 1000-1200
200 7-12:1 85 75-90
Rubber cooling machine
Model no: 55m 5layer
Price: 26666 usd/set
Character:
1.Suitable for use high yield, continuous and flow lines production.
2.Include feeding connecting, talc-power, main cooling and cutting section.
3.The kneader types are suitable for 35l-150l.
Drop door type internal mixer
Model no: m110l
Productivity: 1400kg/h
Driving motor: 300/350hp
Diameter of cylinder: 350mm
Weight: 23000kg
Speed of front rotor: 35rpm
Speed of reart rotor: 30rpm
Price: 53333 usd/set
The machine has very side applications, such as natural rubber, synthetic rubber, all kinds of resin, asphalt, cellulose, pvc, eva and pe, etc. The mixing time is very short, the dust stop sealing device has been specially used to effectively prevent the raw material and ingredients from leakage. It is an ideal mixing equipment with strong and durable structure, long service of life, easy operation, high efficiency, changing worn-out parts easily. The machine has two ways of discharging material, drop door type and slide door type. The above mode is the drop door type.
35l mixer
Model no: m35l
Weight to time: 26-45kg/unit
Number of times: 4-6unit/h
Atmospheric pressure: 0.4-0.7mpa
Main motor power: 55kw6pac
Tilting motor: 1.5kw4pac
Air cylinder diameter: 250cm
Tilting angle: 140
Speed(before/after): 32/25rpm
Weight: 6500kg
Material direction: back
Size h*w*l: 3000*1920*2840
Price: 24666 usd/set
Character:
1.This equipment possesses temperature and time control system for easy but accurate operation and best decentralization.
2.Tilt-able mixing chamber and mechanical shaft sealing design for easy cleaning and color changing.
3.Pressure sealed mixing chamber to assure the quality of mixed material and also prevent environment pollution.
4.The mixing chamber is made of soud alloy steel and work surface is hare chromin coated for supper anti-abrasion.
5.Electric control configuration can be designed according to customer's request.
Mixer (75l)
Model no: m75l
Price: 35333 usd/set
Capacity: 60-85kg/unit
Number of times: 5-7unit/h
Main motor power: 110kw
Atmospheric pressure: 0.6-0.8mpa
Tilting motor: 3.75kw
Air cylinder diameter: 350cm
Tilting angle: 140
Speed (before/after): 32/25rpm
Weight:10800kg
Material direction: back
Size h*w*l: 3760mm*2800mm*3280mm
Model no: jsj65b/150
The first stage screw l/d ratio: 32:1
The second stage screw l/d ratio: 9:1
Motor power (first stage): 55kw
Motor power (second stage): 45kw
Price: 51666 usd/set
Screw speed: 500/85r/min (first/second stage)
Capacity: 500-700kg/h
Features:
1.The characteristics of the machine is advanced design, high quality, good
Plasticizing and low energy consumption.
2.It has the advantages of low noise, smooth operation, large loading and long
Life.
3.The technology can be adjusted according to customer’s raw material.
Production process:
M mixer to zdl automatic winder, zdl forced feeding machine--the zdl single
Screw—molding—three-roll calender—tractor—plate corona treatment—cutting
Machine—piled up
Applicable materials:epdm, pe, poe, eva, pvc, materials plate/sheet etc.
Products:car roor, car trunk plate, car mats, car interiors , eva sheet,
Insulation sheet for vehicle, interior sound insulation pad, car carpet, front
Enclosed sheet and the side enclosed sheet;etc.
Single screw kneader sheet extrusion
Model no: m55l/jdl100
Single screw l/d ratio: 25-36
Screw speed: 20-120r/min
Screw capacity: 250-350kg/h
Mixer motor power: 75kw
Material direction: back
Weight: 8500kg
Price: 75000 usd/set
Mixer capacity: 45-75kg/unit
Number of timers(mixer): 0.6-0.8unit/h
Mixer speed(before/after): 39/30rpm
Mixer size h*w*l: 3250*2300*3350mm
Features:
1.The characteristics of the machine is advanced design, high quality, good
Plasticizing and low energy consumption.
2.It has the advantages of low noise, smooth operation, large loading and long
Life.
3.The technology can be adjusted according to customer’s raw material.
Production process:
M mixer to zdl automatic winder, zdl forced feeding machine--the zdl single
Screw—molding—three-roll calender—tractor—plate corona treatment—cutting
Machine—piled up
Applicable materials:epdm, pe, poe, eva, pvc, materials plate/sheet etc.
Products:car roor, car trunk plate, car mats, car interiors , eva sheet,
Insulation sheet for vehicle, interior sound insulation pad, car carpet, front
Enclosed sheet and the side enclosed sheet;etc.
The professional lsfh machine
Model no:m35l/jsj52/100
Feeder: 11kw conical feeder
The first stage l/d ratio: 32:1
The second stage l/d ratio: 12:1
Price: 100000 usd/set
Motor of mixer machine: 75kw
Screw diameter: 50.5/100mm
Single screw motor: 37/30kw
Capacity: 150-250kg/h
Cutting motor: air cooling die-face hot cutting
Features:
1.Low maintenance?robustness?durable finish standards?excellent
Functionality
2.High-efficient force-feeder ensures high capacity feeding, low energy
Consumption
3. Single screw extruder, equipped with specially designed screw & barrel,
Venting system, has a very good output capacity.
4. Our machine has two characteristics: high degree of automation and assembly
Line work.
5.The pelleting machine has good dispersion effect.
6.The machine production is very high, and the work environment is very clean.
7.The technology can be adjusted according to customer’s raw material.
Single screw kneader sheet extrusion
Model no: m55l/jdl100
Single screw l/d ratio: 25-36
Screw speed: 20-120r/min
Screw capacity: 250-350kg/h
Mixer motor power: 75kw
Material direction: back
Weight: 8500kg
Price: 75000 usd/set
Mixer capacity: 45-75kg/unit
Number of timers(mixer): 0.6-0.8unit/h
Mixer speed(before/after): 39/30rpm
Mixer size h*w*l: 3250*2300*3350mm
Features:
1.The characteristics of the machine is advanced design, high quality, good
Plasticizing and low energy consumption.
2.It has the advantages of low noise, smooth operation, large loading and long
Life.
3.The technology can be adjusted according to customer’s raw material.
Production process:
M mixer to zdl automatic winder, zdl forced feeding machine--the zdl single
Screw—molding—three-roll calender—tractor—plate corona treatment—cutting
Machine—piled up
Applicable materials:epdm, pe, poe, eva, pvc, materials plate/sheet etc.
Products:car roor, car trunk plate, car mats, car interiors , eva sheet,
Insulation sheet for vehicle, interior sound insulation pad, car carpet, front
Enclosed sheet and the side enclosed sheet;etc.
Model no: m110l/jdl150
Feeder: 11kw conical feeder
Cutting mode: air cooling die-face hot cutting
Price: 116666 usd/set
Main motor power (single screw): 110kw
Single screw l/d ratio: 22:1
Screw speed: 20-96r/min
Capacity: 350-400kg/h
Features:
1.Low maintenance?robustness?durable finish standards?excellent
Functionality
2.High-efficient force-feeder ensures high capacity feeding, low energy
Consumption
3. Single screw extruder, equipped with specially designed screw & barrel,
Venting system, has a very good output capacity.
4. Our machine has two characteristics: high degree of automation and assembly
Line work.
5.The pelleting machine has good dispersion effect.
6.The machine production is very high, and the work environment is very clean.
7.The technology can be adjusted according to customer’s raw material.
Open the Machine
model no: 24 inches
price: 91666 USD/SET
roll size(d/l): 610*1830
line speed: 31.6m/min
front roll rpm:16.5min
roll ratio(front/back): 1:1.29*
produce weight(once):120-130kg
motor power: 132kw-6p*
weight: 25500kg
container volume: 45m2
dimensions(lxwxh): L6100XW2050XH2200
cooling mode: pressurized cooling rotating joint
bush: bearing type
material receiver: stainless steel material
energency stop: press button brake&foot brake
transmission: low noise gear box gear
Rubber opening mixing mill
Spec:26
Roll size(d/l): 660*2130
Line speed(m/min): 34.2
Front roll rpm: 16.5min
Roll ratio(front/back): 1:1.29*
Produce weight (once): 160-170kg
Motor power: 160kw-6p
Weight: 32000kg
Price: 130000 usd/set
Container volume: 55.5m3
Dimensions(lxwxh): l62400xw3350xh2670
Cooling mode: pressurized cooling rotating joint
Bush: bearing type
Material receiver: stainless steel material
Energency stop: press button brake&foot brake
Transmission: low noise gear box gear
Rubber cooling machine
Model no: 55m 5layer
Price: 26666 usd/set
Character:
1.Suitable for use high yield, continuous and flow lines production.
2.Include feeding connecting, talc-power, main cooling and cutting section.
3.The kneader types are suitable for 35l-150l.
Rubber Opening Mixing Mill
spec:26
roll size(d/l): 660*2130
line speed(m/min): 34.2
front roll rpm: 16.5min
roll ratio(front/back): 1:1.29*
produce weight (once): 160-170kg
motor power: 160kw-6p
weight: 32000kg
price: 130000 USD/SET
container volume: 55.5m3
dimensions(lxwxh): L62400XW3350XH2670
cooling mode: pressurized cooling rotating joint
bush: bearing type
material receiver: stainless steel material
energency stop: press button brake&foot brake
transmission: low noise gear box gear
Features:
1.suitable for use high yield ,continuous and flow lines production.
2. Include feeding connection,talc-powder,main cooling and cutting section
3.the kneader type are suitable for 35L-150L
4.The cutter wheel and the mold use bearing instead of the traditional copper
alloy base which has some defects found in the operation.
5.Cutting holding plate:
Dealt with in order to worn out and weld the wolfram more durable to general
heat-treated steel,precision is high.
Model no: m55l/jdl100
Single screw l/d ratio: 25-36
Screw speed: 20-120r/min
Screw capacity: 250-350kg/h
Mixer motor power: 75kw
Material direction: back
Weight: 8500kg
Price: 75000 usd/set
Mixer capacity: 45-75kg/unit
Number of timers(mixer): 0.6-0.8unit/h
Mixer speed(before/after): 39/30rpm
Mixer size h*w*l: 3250*2300*3350mm
Features:
1.Low maintenance?robustness?durable finish standards?excellent
Functionality
2.High-efficient force-feeder ensures high capacity feeding, low energy
Consumption
3. Single screw extruder, equipped with specially designed screw & barrel,
Venting system, has a very good output capacity.
4. Our machine has two characteristics: high degree of automation and assembly
Line work.
5.The pelleting machine has good dispersion effect.
6.The machine production is very high, and the work environment is very clean.
7.The technology can be adjusted according to customer’s raw material.
M55ljdl120 single screw granulator
Model: m20l/jdl80
Mixer:20l
Feeder: 7.5kw double-awl feeder
Main motor power (single screw): 37kw
Single screw l/d ratio: 22:1
Packing: plastic film
Price: 66666 usd/set
Capacity:150-220kg/h
Screw speed: 20-120r/min
Cutting motor: air cooling die-face hot cutting
Features:
1.The characteristics of the machine is advanced design, high quality, good
Plasticizing and low energy consumption.
2.It has the advantages of low noise, smooth operation, large loading and long
Life.
3.The technology can be adjusted according to customer’s raw material.
Production process:
M mixer to zdl automatic winder, zdl forced feeding machine--the zdl single
Screw—molding—three-roll calender—tractor—plate corona treatment—cutting
Machine—piled up
Applicable materials:epdm, pe, poe, eva, pvc, materials plate/sheet etc.
Products:car roor, car trunk plate, car mats, car interiors , eva sheet,
Insulation sheet for vehicle, interior sound insulation pad, car carpet, front
Enclosed sheet and the side enclosed sheet;etc.
Single screw kneader sheet extruder (m75l)
Model no: m75l/jdl150
Feeder: 11kw conical feeder
Cutting mode: air cooling die-face hot cutting
Price: 100000 usd/set
Main motor power(single screw): 110kw
Single screw l/d ratio: 22:1
Screw speede: 20-96r/min
Screw capacity: 350-400kg/h
Motor power (mixer): 110kw
Material direction: back
Weight (mixer): 105000kg
Features:
1.The characteristics of the machine is advanced design, high quality, good
Plasticizing and low energy consumption.
2.It has the advantages of low noise, smooth operation, large loading and long
Life.
3.The technology can be adjusted according to customer’s raw material.
Production process:
M mixer to zdl automatic winder, zdl forced feeding machine--the zdl single
Screw—molding—three-roll calender—tractor—plate corona treatment—cutting
Machine—piled up
Applicable materials:epdm, pe, poe, eva, pvc, materials plate/sheet etc.
Products:car roor, car trunk plate, car mats, car interiors , eva sheet,
Insulation sheet for vehicle, interior sound insulation pad, car carpet, front
Enclosed sheet and the side enclosed sheet;etc.
Single screw kneader sheet extrusion
Model no: m55l/jdl100
Single screw l/d ratio: 25-36
Screw speed: 20-120r/min
Screw capacity: 250-350kg/h
Mixer motor power: 75kw
Material direction: back
Weight: 8500kg
Price: 75000 usd/set
Mixer capacity: 45-75kg/unit
Number of timers(mixer): 0.6-0.8unit/h
Mixer speed(before/after): 39/30rpm
Mixer size h*w*l: 3250*2300*3350mm
Features:
1.The characteristics of the machine is advanced design, high quality, good
Plasticizing and low energy consumption.
2.It has the advantages of low noise, smooth operation, large loading and long
Life.
3.The technology can be adjusted according to customer’s raw material.
Production process:
M mixer to zdl automatic winder, zdl forced feeding machine--the zdl single
Screw—molding—three-roll calender—tractor—plate corona treatment—cutting
Machine—piled up
Applicable materials:epdm, pe, poe, eva, pvc, materials plate/sheet etc.
Products:car roor, car trunk plate, car mats, car interiors , eva sheet,
Insulation sheet for vehicle, interior sound insulation pad, car carpet, front
Enclosed sheet and the side enclosed sheet;etc.
Twin screw sheet extruder (js95b)
Model no: js95b
Price: 151666 usd/set
High speed machine: 800l
Twin screw diameter: 91mm
Main motor power: 185kw
Weight: 39.4t
Extrusion width: 2150mm
Extrusino thickness: 0.8-6mm
Capacity: 800-1100kg/h
Features:
1.The characteristics of the machine is advanced design, high quality, good
Plasticizing and low energy consumption.
2.It has the advantages of low noise, smooth operation, large loading and long
Life.
3.The technology can be adjusted according to customer’s raw material.
Production process:
M mixer to zdl automatic winder, zdl forced feeding machine--the zdl single
Screw—molding—three-roll calender—tractor—plate corona treatment—cutting
Machine—piled up
Applicable materials:epdm, pe, poe, eva, pvc, materials plate/sheet etc.
Products:car roor, car trunk plate, car mats, car interiors , eva sheet,
Insulation sheet for vehicle, interior sound insulation pad, car carpet, front
Enclosed sheet and the side enclosed sheet;etc.
35L
6500kg
55KW
24-45kg/Unit
Character:
1.This equipment possesses temperature and time control system for easy but accurate operation and best decentralization.
2.Tilt-able mixing chamber and mechanical shaft sealing design for easy cleaning and color changing.
3.Pressure sealed mixing chamber to assure the quality of mixed material and also prevent environment pollution.
4.The mixing chamber is made of soud alloy steel and work surface is hare chromin coated for supper anti-abrasion.
5.Electric control configuration can be designed according to customer's request.
Pvc cable material granulator
M55l/jsj65a(120)
Cutting mode: air cooling die plate hot cutting
Feeder: 11kw conical feeder
Screw speed: 500r/min
Capacity: 80-1000kg/h
Mixer:55l
The first stage l/d ratio: 32:1
The second stage l/d ratio: 12:1
Features:
1.Low maintenance?robustness?durable finish standards?excellent functionality
2.High-efficient force-feeder ensures high capacity feeding, low energy consumption
3. Single screw extruder, equipped with specially designed screw & barrel, venting system, has a very good output capacity.
4. Our machine has two characteristics: high degree of automation and assembly line work.
5.The pelleting machine has good dispersion effect.
6.The machine production is very high, and the work environment is very clean.
7.The technology can be adjusted according to customer’s raw material.
Product Description
Silance cross-linked cable material granulator
model no: JS65
price: 36666 USD/SET
screw L/D ratio: 40:1
screw diameter: 62.4mm
screw rotating speed: 500r/min
main motor power: 55-75kw
screw torque: 680
torque rating: 4.8
capacity: 200-355kg/h
Features:
1.Low maintenance,Robustness,Durable finish standards,Excellent functionality
2.High-efficient force-feeder ensures high capacity feeding, low energy consumption
3. Our machine has two characteristics: high degree of automation and assembly line work.
4.The Pelleting machine has good dispersion effect.
5.The machine production is very high, and the work environment is very clean.
6.The technology can be adjusted according to customer's raw material.
Product Description
CPE cable material granulator
model no: M110L/JDL150
mixer: 110L
cutting mode: Air cooling die plate hot cutting
screw speed: 90r/min
capacity: 180-700kg/h
feeder: 11kw conical feeder
main motor (single screw): 110kw
single screw L/D ratio: 22:1
Features:
1.Low maintenance,Robustness,Durable finish standards,Excellent functionality
2.High-efficient force-feeder ensures high capacity feeding, low energy consumption
3. Single screw extruder, equipped with specially designed screw & barrel, venting system, has a very good output capacity.
4. Our machine has two characteristics: high degree of automation and assembly line work.
5.The Pelleting machine has good dispersion effect.
6.The machine production is very high, and the work environment is very clean.
7.The technology can be adjusted according to customer's raw material.
Product Description
High Filling Masterbatch Granulator
model no: M35L/JDL100
capacity: 250-300kg/h
L/D ratio: 22:1
main motor power (single screw): 75kw
screw speed: 20-120r/min
feeder: 7.5kw double awl feeder
price: 70000 USD/SET
cutting motor: air cooling die-face hot cutting
Features:
1.Low maintenance,Robustness,Durable finish standards,Excellent functionality
2.High-efficient force-feeder ensures high capacity feeding, low energy consumption
3. Our machine has two characteristics: high degree of automation and assembly line work.
4.The Pelleting machine has good dispersion effect.
5.The machine production is very high, and the work environment is very clean.
6.The technology can be adjusted according to customer's raw material.
Product Description
model no: JDL65/132
main motor power: 37kw
weight: 4000kg
heating mode: electric heating
cooling way: air cooling
extrusion width: 800-1350mm
extrusion thickness: 0.8-5.8mm
capacity: 100-160kg/h
price: 45000 USD/SET
Features:
1.The characteristics of the machine is advanced design, high quality, good plasticizing and low energy consumption.
2.It has the advantages of low noise, smooth operation, large loading and long life.3.The technology can be adjusted according to customer's raw material.
type diameter(mm) L/D screw speed(r/min) motor power (kw) capacity(kg/h)
JSJ52/100 50.5 28-40:1 500 45 150-250
100 7-12:1 85 37
JSJ65/150 62.4 28-40:1 500 55-75 500-700
150 7-12:1 85 45-55
JSJ75/180 71 28-40:1 500 90-110 750-900
180 7-12:1 85 55-75
JSJ95/200 92 28-40:1 400-500 250-315 1000-1200
200 7-12:1 85 75-90
Model no: m75l/jdl150
Feeder: 11kw conical feeder
Cutting mode: air cooling die-face hot cutting
Price: 100000 usd/set
Main motor power(single screw): 110kw
Single screw l/d ratio: 22:1
Screw speede: 20-96r/min
Screw capacity: 350-400kg/h
Motor power (mixer): 110kw
Material direction: back
Weight (mixer): 105000kg
Features:
1.Low maintenance?robustness?durable finish standards?excellent
Functionality
2.High-efficient force-feeder ensures high capacity feeding, low energy
Consumption
3. Single screw extruder, equipped with specially designed screw & barrel,
Venting system, has a very good output capacity.
4. Our machine has two characteristics: high degree of automation and assembly
Line work.
5.The pelleting machine has good dispersion effect.
6.The machine production is very high, and the work environment is very clean.
7.The technology can be adjusted according to customer’s raw material.
75L/150
11kw
500-700kg/H
Features:
1. Our machine has two characteristics: high degree of automation and assembly line work.
2.The Pelleting machine has good dispersion effect.
3.The machine production is very high, and the work environment is very clean.
4.The technology can be adjusted according to customer's raw material.
Model no: m55l/jdl120
Feeder: 11kw double awl feeder
Cutting mode: air cooling die-face hot cutting
Price: 80000 usd/set
Main motor power (single screw): 75kw
Single screw l/d ratio: 22:1
Screw speed: 20-120r/min
Capacity: 300-350kg/h
Features:
1.Low maintenance?robustness?durable finish standards?excellent
Functionality
2.High-efficient force-feeder ensures high capacity feeding, low energy
Consumption
3. Single screw extruder, equipped with specially designed screw & barrel,
Venting system, has a very good output capacity.
4. Our machine has two characteristics: high degree of automation and assembly
Line work.
5.The pelleting machine has good dispersion effect.
6.The machine production is very high, and the work environment is very clean.
7.The technology can be adjusted according to customer’s raw material.
Twin Screw Sheet Extruder (JS95B)
model no: JS95B
price: 151666 USD/SET
high speed machine: 800L
twin screw diameter: 91mm
main motor power: 185kw
weight: 39.4T
extrusion width: 2150mm
extrusino thickness: 0.8-6mm
capacity: 800-1100kg/h
Features:
1.The characteristics of the machine is advanced design, high quality, good
plasticizing and low energy consumption.
2.It has the advantages of low noise, smooth operation, large loading and long
life.
3.The technology can be adjusted according to customer’s raw material.
Production process:
M mixer to ZDL automatic winder,ZDL forced feeding machine--the ZDL single
screw—molding—three-roll calender—tractor—plate corona treatment—cutting
machine—piled up
Applicable materials:EPDM,PE,POE,EVA,PVC,materials plate/sheet etc.
Products:car roor, car trunk plate, car mats, car interiors ,EVA sheet,
insulation sheet for vehicle, interior sound insulation pad, car carpet, front
enclosed sheet and the side enclosed sheet;etc.
110l/75b(180)
11kw
Jiangsu, china
Features:
1. Our machine has two characteristics: high degree of automation and assembly line work.
2.The pelleting machine has good dispersion effect.
3.The machine production is very high, and the work environment is very clean.
4.The technology can be adjusted according to customer's raw material.
v
55l/65a(120)
11kw
China
Plastic film
Features:
1. Our machine has two characteristics: high degree of automation and assembly line work.
2.The pelleting machine has good dispersion effect.
3.The machine production is very high, and the work environment is very clean.
4.The technology can be adjusted according to customer's raw material.
Chemical cross-linking cable material granulatorm75l/sjs65b(150)
Mixer: m75l
Cutting mode: eccentric water-spray plate hot cutting
Capacity: 150-600kg/h
Model no.: m75/sjs65b(150)
Feeder: 11kw conical feeder
The first stage l/d ratio: 32:1
The second stage l/d ratio: 12:1
Features:
1. Our machine has two characteristics: high degree of automation and assembly line work.
2.The pelleting machine has good dispersion effect.
3.The machine production is very high, and the work environment is very clean.
4.The technology can be adjusted according to customer's raw material.
CPE cable material granulator
M110L/JZD150
mixer: 110L
cutting mode: Air cooling die plate hot cutting
screw speed: 90r/min
capacity: 180-700kg/h
feeder: 11kw conical feeder
main motor (single screw): 110kw
single screw L/D ratio: 22:1
Features:
1. Our machine has two characteristics: high degree of automation and assembly line work.
2.The Pelleting machine has good dispersion effect.
3.The machine production is very high, and the work environment is very clean.
4.The technology can be adjusted according to customer's raw material.
Product Description
model no: JSJ65/132
main motor power: 37kw
weight: 4000kg
price: 46666 USD/SET
cutting mode: air cooling die-face hot cutting
extrusion thickness: 0.8-5.8mm
extrusion width: 800-1350mm
capacity: 100-160kg/h
Model no.:jzd65b
High speed blender:300l
Screw diameter:62.4mm
Main motor power(kw):75
Weight(t):19.5
Extrusion width(m):1000
Extrusion thickness(mm):0.8-6
Capacity(kg/h):200-320
Applicable materials:epdm, pe, poe, eva, pvc material such as plate, sheet;
Products areas:
Car roof, car trunk plate, car seat cushions, car inner decoration, eva sheet, insulation sheet, interior sound insulation pad, car mat, before plate, side plate, etc.
