Byj series stepper motor
Model 35BYJ46
Rated voltage 12VDC
Number of Pole 4
Speed Variation Ratio 1/85.25
Stride Angle 7.5fp /85.25
DC resistance 130ohmf+7%(25k)
Idle In-traction Frequency >500Hz
Idle Out-traction Frequency >800Hz
In-traction Torque >78.4mN.m(120Hz)
Self-positioning Tor >39.2mN.m
insulated resistance >10ohm(500V)
insulated electricity power 600VAC/1mA/1s
Insulation grade A
Rise in Temperature <40K(120Hz)
Noise <40dB(A)
Weight about 60g
BYJ stepping motor mainly used in wind guiding board of fission air conditioner in house,wind heat fire placesing board etc.,
Note:
1,Colour&length of conducting ire can be made according to the requirement of users.
2,The output shaft can be made according to the consumers need.
3,Working voltages and frequencies can be made as per users' requirements.
4,Installation dimension can be made according to user's requirements
Synchronous motor
Model 42TYJ-F
Rated voltage 220/240V
Power consumption <4W
Input current <25mA
Rated frequency 50/60Hz
Torque >2kgf.cm
Speed 15-18r/min
Starting voltage <176V
Insulation resistance <100Mohm
Dielectric strength 1500VAC/1min
Noise <35dB(A)
Coil temperature rise <60K
Insulation class E
CW,CCW dual direction control
42TYJ synchronous motor mainly used in Stage Lighting ,Rotating Christmas Tree,Stand Electric Toy and varied rotating crafts.
Note:
1,The two ends of capacitor are respectively connected to the lead risers of the red and yellow wires.
2,Connect the terminal posts 1 and 2 to power source and view from the shaft-extension end,the output shaft turns anticlockwise.Connect the terminal posts 2 and 3 to power source and the output shaft turns clockwise.
DFJ series mechanical timer
Specification type DFJ-A
Rated voltage 220VAC
Rated currency 3A
Insulation resistance 100ohm
Electric Strength 2000VAC/min
Operating Direction of Main Shaft CW
Operating Moment of Main Shaft <0.6N.cm
Timing Range 120min,180min
DFJ mechanical timer Used for timing of fan, heater (fire place),washing machine etc..
Note:
1,The output shaft can be made according to the consumers need.
2,Working voltages and frequencies can be made as per users' requirements.
